How to install and boot on JETSON-NANO-DEV-KIT 16GB eMMC

Qengineering / Jetson-Nano-Ubuntu-20-image

Jetson Nano with Ubuntu 20.04 image

BSD 3-Clause "New" or "Revised" License

646 stars 70 forks source link

Open Thanhktm opened 8 months ago

Thanhktm commented 8 months ago

Thanks for your effort. I'm trying to flashing and boot but there are many failed message. Here is my setup:

Before flashing your image. My existing system was boot from eMMC then load system from USB card reader

Today I just try to flashing your image into the SD card and plug usb reader back but it failed to boot.

Could you help me go through with this Jetson model. Thanks a lot.

Thanhktm commented 8 months ago

Please help

Thanhktm commented 8 months ago

@Qengineering Please help Thanks

Qengineering commented 8 months ago

I haven't tried the eMMC. Please take a look at https://github.com/Qengineering/Jetson-Nano-Ubuntu-20-image/issues/29 and https://github.com/Qengineering/Jetson-Nano-Ubuntu-20-image/issues/32 I can imagine you have to start with the original Ubuntu 18 and upgrade to 20 once your eMMC is working correctly. On the other hand, people using SSD are facing in fact the same trouble; shifting the boot sequence