search

QuinnDamerell / OctoPrint-OctoEverywhere

Cloud Empower Your OctoPrint, Klipper, and Bambu Lab 3D Printers With Free, Private, And Secure Remote Access, AI Print Failure Detection, Real-time Notifications, Live Streaming, and More!
https://octoeverywhere.com
GNU Affero General Public License v3.0
165 stars 14 forks source link

Unable to login with bambu cloud #77

Open juanfranciscolopez28 opened 3 weeks ago

juanfranciscolopez28 commented 3 weeks ago

Hi!

Since a few days ago a 403 error occurs when trying to connect to bambu cloud, the error that appears in the console is the following:

2024-10-29 20:00:31,168 - ERROR - Login Bambu Cloud failed with status code: 403, Response: 

2024-10-29 20:00:31,170 - ERROR - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2024-10-29 20:00:31,170 - ERROR -                                                      Failed To Log Into Bambu Cloud

2024-10-29 20:00:31,171 - ERROR - Unknown error, we will try again later.

I use docker compose with the default configuration that appears in the wiki. Until a few days ago it worked correctly.

Best regards and thanks!

QuinnDamerell commented 2 weeks ago

Thanks for the bug report! I will look into this.

If you can, I would recommend you use the LAN connection for Bambu Connect, it's much more stable.

ados8 commented 2 weeks ago

Just discovered OctoEverywhere and this issue was my first main sticking point. I don't want to enable LAN mode to get it working to then loose mobile and remote control. Hoping the bug is sorted soon. 😊

ados8 commented 2 weeks ago

Found if you keep setting LAN only mode and cloud mode multiple times you eventually glitch it to work in cloud mode. Makes it much easier to print as you can use the mobile app and Bambu Studio doesn't require selecting the printer every time.

shatteredeagle commented 1 week ago

Getting the same error. @ados8 where were you switching the modes back and forth on the printer or the app config (or both :-) )

ados8 commented 1 week ago

@shatteredeagle on the printer side. I also reinstall the Docker a few times which generates the registration link. It's been working ever since and I even factory reset the printer for another reason. For the best connection make sure the printer and the local connector is on the same network or if you have them on different network/vlans you have broadcasting enabled so they can discover between the networks.

Rulevoid commented 3 days ago

I had a working config with an A1 and an A1m without LAN only, then rebuilt my docker containers and now get this same issue. I can no longer login and see the same error even after turning off MFA and confirming credentials.

Any update on this?

Edit: I tried swapping to LAN mode which did get the video feeds to work, but the Bambu connection was still throwing a 403. I really want cloud print capability, so then I tried to flip it back and re-bind the printers to my Bambu account and now cameras don't work either.