request to add the QC 2.0 (9V or 12V) maximum voltage selection function to the settings

Ralim / IronOS

Open Source Soldering Iron firmware

https://ralim.github.io/IronOS/

GNU General Public License v3.0

7.28k stars 724 forks source link

request to add the QC 2.0 (9V or 12V) maximum voltage selection function to the settings #1419

Open StepanKoshman opened 2 years ago

StepanKoshman commented 2 years ago

Describe the solution you'd like

Describe alternatives you've considered

Additional context

Ralim commented 2 years ago

Hi, Can you please elaborate further? As of present QC2.0 is not supported and just QC3 is used. What is the use case? What device is this for? Why does the existing QC3 support not work for you?

StepanKoshman commented 2 years ago

SKY202210278_171077 SKY202210278_171042 SKY202210278_171003 SKY202210278_171086 SKY202210278_171061 SKY202210278_171098 Xiaomi powerbank 2i, pinecil v2. As you can see from the photo above, the bank does not support QC 3.0, but only QC 2.0. up to 12 volts. But my pinecil v2 only raises the voltage to 9 volts, while the power does not exceed 10 watts. When I force the voltage to 12 volts with an external trigger, the power reaches 18 watts.

discip commented 1 year ago

@StepanKoshman Is this issue still present? If not, please don't forget to close. 😊

StepanKoshman commented 1 year ago

@StepanKoshman Эта проблема все еще существует? Если нет, не забудьте закрыть. 😊

Yes, this is still relevant for me...