Closed Fudalii closed 4 years ago
You must hold build-in button for 10 seconds, or trigger 10 times any of switches.
Welcome.
I tried it (like in RavenCore) but it doesn't help.
I tried the external button and the small button on the housing.
The reset is confirmed correctly (3 flashes of the LED) but the device does not reset. I can still add them to HomeKit.
I also tried to upload Flash again but it's the same :)
HAA can not be reset. You can enter in setup mode to reconfigure it.
The reset is confirmed correctly (3 flashes of the LED) but the device does not reset.
You need connect to HAA-xxxxxx access point and configure wi-fi connection/json string/other options. And you can reset wi-fi/homekit settings at this mode.
Well. I understand. So in the template on the Wiki page I have to add this option for GPIO button on the housing ... ?
I have updated Shelly2.5 template to add "setup mode" button. Hold it for 10 seconds and device will restart in "setup mode".
WoW ... Thx !
You must hold build-in button for 10 seconds, or trigger 10 times any of switches.
This doesn't work. Tried 10 times, toggling either SW1 or SW2 does absolutely nothing.
new version HAA Home Manager v3.4.4 now work (i set my ipad on 2.4 ghz wifi)
Hello.
How to reset the device to re-enter WiFi or new JSON data?
The Shelly 2.5 template was entered.. Everything works ok. But I can't reset it.
Within 1 minute I push a small button 10x and I see 3 x led flash. But the HAA network doesn't appear