search

S-March / smarchWatch_Public

GNU General Public License v3.0
1.52k stars 197 forks source link

Not enough info on components for charger #23

Closed vanbluca closed 5 years ago

vanbluca commented 5 years ago

Some of the components for the charger are not listed in the “bill of material”. For example the magnet (locks watch in place) and the (female) connector that is for the cable that goes into the charger. Perhaps other components for the charger PCB are also missing, but I am not sure about that. Could you please add the missing info? As for the magnet could you give us at least the dimensions?

S-March commented 5 years ago

Yes, sorry about that! I will add it tonight when I get home.

vanbluca commented 5 years ago

Thx!

vanbluca commented 5 years ago

According to the “schematics” files, you will need the following additional components for the charger (all just 1 piece): 10118194-0001LF (609-4618-1-ND) ESD9B5.0ST5G (ESD9B5.0ST5GOSCT-ND) 825-22-002-10-001101 (ED10660-ND)

I recommend to wait with ordering them until @S-March confirmed. Perhaps @S-March could also tell us the dimensions of the magnet he used.

S-March commented 5 years ago

Those are the correct parts. Also this is the magnet I used: https://www.amazon.com/gp/product/B074BP1FR8/

vanbluca commented 5 years ago

I was surprised to see you used a 32mm magnet while the space in the body is just under 30mm. I would personally go with a 30x5mm or a 25x5mm magnet.

S-March commented 5 years ago

There is no magnet in the actual watch. It is just in the charger.

vanbluca commented 5 years ago

Yes I know. I was talking about the space in the housing of the charger...