Hello, I'm trying to use fakegc along side real game cartridges on my vita.
Current outcome:
There are two plugins fakegc.suprx and fakegc.skprx, I always have the .suprx active under main.
When fakegc.skprx is not active if I put in a game cartridge it works as expected but if I put in the sd2vita it does not work and there is no activity light. Log from yamt below:
When I have fakegc.skprx enabled the sd2vita game cartridge works perfectly however real game cartridges will not work however when inserted the activity light will flash for a few seconds. Log from yamt below:
yamt helper started 0, flags:
use_usb 1 | filog 1 | usb_leg 0 | nowake 0
Mounting bootfs for umass... ok
patch_usb: 0x11C01
found uma, redir 0x80010011
umass module loaded, uma fd = 0x11C5F, umaid = 0x800
mounting 0x800 = 0x80010011
mounting 0xF00 = 0x80010011
Expected outcome:
From what I have read looking into the problem, the .skprx file is for if you do not wish to setup the custom partitions and I believe that it is doing something that I should have enabled in yamt but don't but is also treating everything put in the game slot as an sd2vita which is why regular game cards don't work, however I could be wrong. What I'm trying to achieve is the system being about to properly mount whats in the game slot as in the way intended but only if it is detected as an sd2vita.
Current settings:
I currently have a 3G PSVita with a PSVSD adapter, I am currently using YAMT but I was previously using storagemgr I switched over to YAMT as storagemgr wouldn't let me setup gro0.
This is my current config.txt:
Here is my YAMT settings:
I have tried changing my uma0 to other mounts such as sd2vita but no luck
I have tried using the developer option mount all custom partitions with the sd2vita inserted but it didn't help
I have tried changing around these settings a bit as well
If any more information is needed let me know and any help is appreciated
Hello, I'm trying to use fakegc along side real game cartridges on my vita. Current outcome: There are two plugins fakegc.suprx and fakegc.skprx, I always have the .suprx active under main. When fakegc.skprx is not active if I put in a game cartridge it works as expected but if I put in the sd2vita it does not work and there is no activity light. Log from yamt below:
When I have fakegc.skprx enabled the sd2vita game cartridge works perfectly however real game cartridges will not work however when inserted the activity light will flash for a few seconds. Log from yamt below:
Expected outcome: From what I have read looking into the problem, the .skprx file is for if you do not wish to setup the custom partitions and I believe that it is doing something that I should have enabled in yamt but don't but is also treating everything put in the game slot as an sd2vita which is why regular game cards don't work, however I could be wrong. What I'm trying to achieve is the system being about to properly mount whats in the game slot as in the way intended but only if it is detected as an sd2vita.
Current settings: I currently have a 3G PSVita with a PSVSD adapter, I am currently using YAMT but I was previously using storagemgr I switched over to YAMT as storagemgr wouldn't let me setup gro0. This is my current config.txt:
Here is my YAMT settings:
I have tried changing my uma0 to other mounts such as sd2vita but no luck
I have tried using the developer option mount all custom partitions with the sd2vita inserted but it didn't help
I have tried changing around these settings a bit as well
If any more information is needed let me know and any help is appreciated