search

SUSHMITAH / btstack

Automatically exported from code.google.com/p/btstack
0 stars 0 forks source link

GPS: doesn't work with Leadtek 9553 #122

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1.buying a Leadtek 9553 (Bluetooth GPS module)
2. Install BTstack GPS on a iPad WiFi 16GB
3.ehm... nothing, it will connect, but no satellites or data

What is the expected output? What do you see instead?
Wel... no data, or anything, only that it is connected

What version of the product are you using? On what operating system?
BTStack GPS 1.5-25900 on an iPad Wifi 16GB with 4.2.1 and jailbreak Greenpoison
And all Cydia updates installed.
With a Leadtek 9553 with an on/off switch
It will connect via bluetooth, but is don't see any data.
I see a map of europe, but no satellites, or positioning.
The device works correctly on my Nokia N91 an E75.

Please provide any additional information below.
Specs Leadtek 9553
Chipset; SiRF StarIII Technology
Frequency;  L1, 1575.42Mhz
C/A Code; 1.023Mhz chip rate
Channels; 20
Protocol; NMEA-0183 @ 57600bps
Electrical interface; Two full duplex serial TTL interface
Bluetooth; 2.4GHz ISM Band
Bluetooth Specification v1.2
Profile; Serial Port Profile (SPP)

Original issue reported on code.google.com by paulvdw...@gmail.com on 5 Feb 2011 at 5:13

GoogleCodeExporter commented 8 years ago 
I have the same Problem with IPhone 3G 4.2.1 and Leadtek 9553

Original comment by gotthold...@googlemail.com on 3 Jun 2011 at 12:07

GoogleCodeExporter commented 8 years ago 
Me too. Iphone 3GS 4.2.1 and Leadtek 9553.

Original comment by josepmar...@gmail.com on 15 Jun 2011 at 4:10

GoogleCodeExporter commented 8 years ago 
hi. can anyone of you connect to your GPS devices using BTstack and let it 
running for a few minutes, with the GPS receiver in clear sight of some 
satellites. Then disconnect and attach the file /tmp/hci_dump.pklg from your 
iOS device here please. I"ll try to see if I can see what's going on.

Original comment by matthias.ringwald@gmail.com on 17 Jun 2011 at 5:52

GoogleCodeExporter commented 8 years ago 
Hi.This is the file. I hope that can be useful.

Original comment by josepmar...@gmail.com on 23 Jun 2011 at 9:49

Attachments:

GoogleCodeExporter commented 8 years ago 
I also comment that in the tmp folder are a gpsserial file who was unistalled, 
but still present in this folder. I don't know if it could be the cause.

Original comment by josepmar...@gmail.com on 23 Jun 2011 at 9:54

GoogleCodeExporter commented 8 years ago 
Same problem here with IPAD 2 Wifi 32 GB and Leadtek 9553. Sometimes the 
program show  the position. but it's only a still image that is not updates. I 
also attach the file.

PD: sorry for my english

Original comment by ahsuarez on 7 Jul 2011 at 6:29

Attachments:

GoogleCodeExporter commented 8 years ago

Original comment by matthias.ringwald@gmail.com on 9 Jul 2011 at 10:11

GoogleCodeExporter commented 8 years ago 
Hello,

i have the same problem with my GPS-Mouse Leadtek 9553 and the IPad 1 Wifi 32GB.
Thera are a answer to this problem?

Greetings

Original comment by to...@gmx.de on 5 Dec 2011 at 8:58

GoogleCodeExporter commented 8 years ago 
My Solution; Bought a TomTom Wireless Bluetooth GPS Dongle (MKII)
It works perfect, and is quicker than waiting for a solution!

Original comment by paulvdw...@gmail.com on 5 Dec 2011 at 9:21

GoogleCodeExporter commented 8 years ago 
Hello,

and the TomTom Wireless Bluetooth GPS Dongle works also with the Navigon App on 
the IPad (WiFi only)?

Original comment by to...@gmx.de on 6 Dec 2011 at 9:58

GoogleCodeExporter commented 8 years ago 
Could you try with the newer BTstack GPS 1.7.2 and post new packet logs if it 
doesn't work?

Original comment by matthias.ringwald@gmail.com on 8 Jan 2013 at 8:29

GoogleCodeExporter commented 8 years ago 
Getting error: registration check failed after upgrade to 1.7.2

Any help on this please?

Original comment by alienxi...@gmail.com on 13 Jan 2013 at 11:17

GoogleCodeExporter commented 8 years ago 
(Cannot do much without more information)

Original comment by matthias.ringwald@gmail.com on 1 Apr 2013 at 3:22