CNC-xPRO-Driver-PCB

CNC xPRO driver w/ 4x DRV8825 motor drivers; allows for dual motor configurations on the X,Y, or Z axis + wireless support

See these links for more details.

• Spark Concepts
• CNC xPRO wiki
• xPRO Support Forum
• xPRO Github
• Spark Concepts Web Store

See the new CNC xPRO Arduino Due ARM Port and the G2 wiki

Files:

• Schematics
• Solder Stencil
• Hardware

Hardware:

• 100% GRBL version 0.8c compatible
• Capable of powering from ATX PSU or from a dedicated 12V/24V two wire power supply
• Drive 4 motors with DRV8825 Stepper Drivers - 2.5A (peak) with 1.75A (RMS) with up to 1/32 microstepping
• 1 Driver capable of cloning X,Y, or Z or being run as an independent axis
• Hardware support for both USB and Wireless Operation (XBee, WiFly, or RN42-XV)
• Emergency Stop to cut all motor power (with optional override)
• 12-24V and 5V outputs for powering peripherals (fans, pumps, vacuums)
• Quickly connect to Stepper Motors and limit switches with 3.5mm screw terminals

Website at: http://www.spark-concepts.com

CNC xPRO by Spark Concepts is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.