search

Supergiovane / node-red-contrib-knx-ultimate

Control your KNX intallation via Node-Red! A bunch of KNX nodes, with integrated Philips HUE control and ETS group address importer.
https://youtu.be/egRbR_KwP9I
MIT License
154 stars 34 forks source link

Problem after Node-Red restart or deploy #352

Closed VicoBox closed 7 months ago

VicoBox commented 7 months ago

Hello Supergiovane! Thank you for developing powerful node.

I'm new to KNX router and node-red. recently, I noticed something strange. When I redeploy or restart node-red, the knx device node connects normally(connected on duty), but it doesn't work well. For the first 5 minutes, the telegram doesn't reach to knx bus, but I can get a telegram from knx. After about 5 minutes, I can control the knx devices in the node red flow, the telegram will reach to knx, but I can't get any telegram from knx bus. There is no other warning or error log, only debug log. Do you know the solution for this problem?

I'm running node-red on the proxmox lxc and node-red version is up to date, knx ultimate node also is up to date. If you need any futher information, please let me know.

Supergiovane commented 7 months ago

Hi I’ve not enough infos, sorry. I need to know make/model of your knx gateway and your gateway config. A screenshot should be fine

VicoBox commented 7 months ago

Maybe it’s my proxmox setup problem. Running on raspberry pi is working well. Thank you for your supporting :)