Closed bfsxzxh1 closed 3 years ago
Your computer restarted because of a problem. Press a key or wait atew seconds to continue starting up. Wore ordinateur a redemarre en raison d'un probleme. Pour poursuitre Teredemarrage, appuyez surune touche ou patientezquelquessecondes. E ordenador se ha reiniciado debido a un problema. Para continuar conel arranque, pulse cualquier tecla o espere unos segundos. thr Computer wurde aufgrund eines Problems neu gestartet. Drticken Sie zum Fortfahren eine Taste oder warten Sie einige Sekunden. 問題於起老九大的了>匕1—夕老再起動L末L九。乙の未求起動才石場合脉 心于扎办の午一变押寸》、数秒間子の末末抬待古人龙合b。 电脑因出现问题而重新启动。请按一下按键,或等几秒钟以继续启动。
您好!
感谢您关注 ThrRip 的开源项目!
这项错误一般是由于上次启动 macOS 或是 macOS Base System 时强制关机引起的。我在遇到这个错误时,按照提示中的方法(“请按一下按键,或等几秒钟以继续启动。”)即可正常启动。
但是如果您多次遇到此问题,并且没有在启动 macOS 或 macOS Base System 时强制关机或断电,则您可能需要在 config.plist -> NVRAM -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> boot-args
中加入 -v
keepsyms=1
和 debug=0x100
以查明导致此错误的原因。
让我感到奇怪的是,您上次在此项目提交 Issue 使用的是英文,但是这次您使用了中文。我想告诉您的是,在 ThrRip 的所有开源项目中提交 Issue 都可以使用中文或英文,不需要为语言问题而纠结。
如果您觉得此项目帮助了您,请点亮 Star。
谢谢你的帮助 上次我看没有人使用中文提问 所以我就没好意思用中文 那我明天试试
好的😂,期待您的回复。
我试了一下 不知道如何加入 -v keepsyms=1 和 debug=0x100 我尝试了在子目录下创建 不行 还是在哪里加入这两个参数 还得麻烦指导下
我第一次尝试安装macos 不知道bios里面有啥需要注意的设置
-v
keepsyms=1
debug=0x100
三个参数需要在 config.plist -> NVRAM -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> boot-args
中加入。
BIOS 的设置可以参考 OpenCore Install Guide。
启动时卡在这里了,有什么解决方案吗?
您可能需要将 AirportItlwm.kext
暂时从 /EFI/OC/Kexts
和 config.plist
中移除,再进行后续的尝试。
又卡在声卡了,😂
与此问题有关的事项,我在 README.md 中提到过:
Stuck onResolved after fixing SSDTs, adding some kernel extensions, etc.IOG flags ... Generation from SMC report as ... IOPPF ...
在我自己配置我的 EFI 文件时,这个问题是如何解决的,现在我自己也记不太清了。但是看您的 -v
输出好像并非是 AppleALC 与声卡的问题,更可能的是和嵌入式控制器、IRQ 冲突等底层问题有关。
您可以自己尝试删除 AppleALC.kext
或使用其他方法来修复。
另外,因为 GitHub 是一个开源社区,使用 ThrRip 制作的 EFI 文件的开源社区成员不可能得到付费级别的服务。所以,此 Issue 将被关闭,您在安装过程中遇到的其他问题将不会再获得 ThrRip 的解答,因为这份 EFI 文件本身并没有任何问题。
感谢您对 ThrRip 的开源项目的支持!如果您觉得此项目帮助了您,请考虑点亮 Star。