nallath
commented
1 year ago We need a bit more info to help you out. Could you please add the log files?
You can find your log file here:
Windows: %APPDATA%\cura\
Closed Fake1647 closed 1 year ago
nallath
commented
1 year ago We need a bit more info to help you out. Could you please add the log files?
You can find your log file here:
Windows: %APPDATA%\cura\
Fake1647
commented
1 year ago 2023-03-30 22:13:21,688 - INFO - [MainThread] cura.CuraApplication.readLocalFile [1775]: Attempting to read file file:///C:/Users/flame/AppData/Local/Temp/Rar$DRa12704.48406/files/chef_pin.stl
2023-03-30 22:13:21,691 - DEBUG - [JobQueueWorker [9]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds
2023-03-30 22:13:21,692 - DEBUG - [JobQueueWorker [9]] STLReader.STLReader._read [68]: Loaded a mesh with 768 vertices
2023-03-30 22:13:21,694 - DEBUG - [JobQueueWorker [9]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0009975433349609375 seconds. 64 input vertices. 64 output vertices.
2023-03-30 22:13:21,694 - DEBUG - [JobQueueWorker [9]] UM.FileHandler.ReadFileJob.run [83]: Loading file took 0.0 seconds
2023-03-30 22:13:21,697 - DEBUG - [JobQueueWorker [9]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.000997304916381836 seconds. 64 input vertices. 64 output vertices.
2023-03-30 22:13:21,705 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x0000022CE3E81810>, took 0ms
2023-03-30 22:13:21,722 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=1) TranslateOp.(node=<CuraSceneNode object: 'chef_pin.stl'>,trans.=<200.000,7.410,0.000>), took 0ms
2023-03-30 22:13:21,856 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [74]: Default machine actions added for machine definition [creality_ender3]
2023-03-30 22:13:22,073 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [190]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3 / Ender-3 v2] at position [0]
2023-03-30 22:13:22,074 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [79]: No machine with name Creality Ender-3 / Ender-3 v2 in list of firmware to check.
2023-03-30 22:13:22,225 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [275]: Creating thumbnail image (just before slice)...
2023-03-30 22:13:22,226 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-03-30 22:13:22,227 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.3.0-beta.1\share\cura\resources\shaders\overhang.shader]...
2023-03-30 22:13:22,230 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.3.0-beta.1\share\cura\resources\shaders\transparent_object.shader]...
2023-03-30 22:13:22,231 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.3.0-beta.1\share\cura\resources\shaders\striped.shader]...
2023-03-30 22:13:22,324 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [290]: Starting to slice...
2023-03-30 22:13:22,325 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [309]: Going to slice build plate [0]!
2023-03-30 22:13:22,325 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [235]: Previous socket existed. Closing that first.
2023-03-30 22:13:22,438 - DEBUG - [MainThread] cura.Machines.ContainerTree.getitem [120]: Adding container tree for creality_ender3 took 0.35954976081848145 seconds.
2023-03-30 22:13:22,446 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ChangeAtZ
2023-03-30 22:13:22,448 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ColorMix
2023-03-30 22:13:22,449 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: CreateThumbnail
2023-03-30 22:13:22,450 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2023-03-30 22:13:22,452 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayProgressOnLCD
2023-03-30 22:13:22,454 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: FilamentChange
2023-03-30 22:13:22,455 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: InsertAtLayerChange
2023-03-30 22:13:22,457 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: PauseAtHeight
2023-03-30 22:13:22,459 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: RetractContinue
2023-03-30 22:13:22,460 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: SearchAndReplace
2023-03-30 22:13:22,463 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: Stretch
2023-03-30 22:13:22,464 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: TimeLapse
2023-03-30 22:13:22,465 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: UsePreviousProbeMeasurements
2023-03-30 22:13:22,467 - WARNING - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadAllScripts [155]: Unable to create a folder for scripts: C:\Program Files\UltiMaker Cura 5.3.0-beta.1\share\uranium\resources\scripts
2023-03-30 22:13:22,467 - WARNING - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadAllScripts [155]: Unable to create a folder for scripts: C:\Program Files\UltiMaker Cura 5.3.0-beta.1\share\cura\resources\scripts
2023-03-30 22:13:22,469 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayPrintInfosOnLCD
2023-03-30 22:13:22,470 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: FlowTower
2023-03-30 22:13:22,474 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: GCodeDocumentation
2023-03-30 22:13:22,476 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: RetractTower
2023-03-30 22:13:22,478 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: SpeedTower
2023-03-30 22:13:22,478 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [192]: Socket state changed to Listening
2023-03-30 22:13:22,479 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: TempFanTower
2023-03-30 22:13:22,482 - INFO - [MainThread] UM.Backend.Backend.startEngine [95]: Started engine process: C:\Program Files\UltiMaker Cura 5.3.0-beta.1\CuraEngine.exe
2023-03-30 22:13:22,482 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [115]: [Backend] Calling engine with: ['C:\Program Files\UltiMaker Cura 5.3.0-beta.1\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2023-03-30 22:13:22,513 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.512] [info] Connecting to 127.0.0.1:49674
2023-03-30 22:13:22,520 - INFO - [MainThread] cura.CuraApplication.run [838]: Initializing machine manager
2023-03-30 22:13:22,523 - INFO - [MainThread] cura.CuraApplication.run [843]: Initializing container manager
2023-03-30 22:13:22,557 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [196]: Socket state changed to Connected
2023-03-30 22:13:22,557 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [185]: Backend connected on port 49674
2023-03-30 22:13:22,559 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [516]: Sending slice message took 0.23540520668029785 seconds
2023-03-30 22:13:22,658 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.loadAuthDataFromPreferences [258]: Attempting to load the auth data from preferences.
2023-03-30 22:13:22,661 - DEBUG - [JobQueueWorker [0]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.06339764595031738 seconds
2023-03-30 22:13:22,662 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [235]: Could not find output device with id digital_factory to remove
2023-03-30 22:13:22,665 - DEBUG - [JobQueueWorker [0]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.001991748809814453 seconds. 8 input vertices. 8 output vertices.
2023-03-30 22:13:22,679 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-03-30 22:13:22,705 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [188]: Loading theme file: C:\Program Files\UltiMaker Cura 5.3.0-beta.1\share\cura\resources\themes\cura-light\theme.json
2023-03-30 22:13:22,724 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [323]: Loaded theme C:\Program Files\UltiMaker Cura 5.3.0-beta.1\share\cura\resources\themes\cura-light
2023-03-30 22:13:22,724 - INFO - [MainThread] UM.Qt.Bindings.Theme.load [324]: System's em size is 13px.
2023-03-30 22:13:22,766 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.766] [info] All settings: -s support_bottom_line_distance="2.4000240002400024" -s minimum_interface_area="10" -s brim_replaces_support="False" -s machine_width="235" -s expand_skins_expand_distance="0.8" -s support_tree_angle="40" -s retraction_count_max="100" -s retraction_combing_max_distance="30" -s skin_outline_count="1" -s support_interface_wall_count="0" -s z_seam_relative="False" -s speed_roofing="25.0" -s zig_zaggify_support="False" -s mesh_position_x="0" -s material_no_load_move_factor="0.940860215" -s small_feature_max_length="0.0" -s material_adhesion_tendency="10" -s gradual_infill_step_height="1.5" -s raft_interface_acceleration="500" -s top_skin_preshrink="0.8" -s minimum_roof_area="10" -s extruder_prime_pos_abs="False" -s cross_support_density_image="" -s min_infill_area="0" -s raft_interface_fan_speed="0" -s wipe_move_distance="20" -s layer_0_z_overlap="0.15" -s support_bottom_height="0.8" -s machine_min_cool_heat_time_window="50.0" -s extruders_enabled_count="1" -s interlocking_beam_width="0.8" -s wall_x_material_flow="100" -s support_bottom_stair_step_height="0" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s cool_fan_speed="100.0" -s retraction_extra_prime_amount="0" -s magic_mesh_surface_mode="normal" -s retraction_enable="True" -s layer_start_x="0.0" -s mesh_position_y="0" -s machine_max_jerk_e="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s material_shrinkage_percentage_xy="100.0" -s small_hole_max_size="0" -s machine_nozzle_cool_down_speed="2.0" -s raft_base_speed="18.75" -s support_enable="True" -s raft_surface_speed="25.0" -s skirt_brim_line_width="0.4" -s machine_max_feedrate_x="500" -s raft_surface_layers="2" -s support_z_distance="0.02" -s minimum_bottom_area="10" -s bridge_enable_more_layers="True" -s support_wall_count="1" -s prime_tower_enable="False" -s flow_rate_extrusion_offset_factor="100" -s retraction_prime_speed="25" -s print_sequence="all_at_once" -s extruder_prime_pos_z="0" -s wireframe_fall_down="0.5" -s wall_thickness="0.8" -s bridge_skin_speed="12.5" -s acceleration_support_bottom="500" -s machine_max_acceleration_z="100" -s speed_ironing="16.666666666666668" -s line_width="0.4" -s machine_minimum_feedrate="0.0" -s gradual_support_infill_step_height="1" -s speed_support_infill="25.0" -s mesh_position_z="0" -s wall_line_width="0.4" -s coasting_speed="90" -s wall_0_material_flow="100" -s bridge_wall_min_length="2.2" -s skirt_brim_speed="20.0" -s coasting_min_volume="0.8" -s acceleration_travel_layer_0="500" -s speed_support_roof="25.0" -s support_infill_angles="[ ]" -s wall_extruder_nr="-1" -s inset_direction="inside_out" -s bridge_wall_material_flow="50" -s minimum_polygon_circumference="1.0" -s bridge_fan_speed_3="0" -s acceleration_roofing="500" -s top_bottom_pattern_0="lines" -s cool_fan_full_layer="4" -s support_meshes_present="False" -s anti_overhang_mesh="False" -s support_roof_wall_count="0" -s machine_max_acceleration_e="5000" -s wall_transition_length="0.4" -s acceleration_travel="500" -s infill="0" -s hole_xy_offset="0" -s extruder_prime_pos_y="0" -s infill_multiplier="1" -s acceleration_prime_tower="500" -s cross_infill_density_image="" -s switch_extruder_extra_prime_amount="0" -s min_even_wall_line_width="0.34" -s jerk_print="8" -s magic_fuzzy_skin_enabled="False" -s jerk_support="8" -s machine_steps_per_mm_y="50" -s relative_extrusion="False" -s support_interface_extruder_nr="0" -s bridge_wall_speed="12.5" -s support_tree_collision_resolution="0.2" -s bottom_layers="4" -s material_extrusion_cool_down_speed="0.7" -s support_interface_angles="[ ]" -s cool_min_layer_time="10" -s raft_surface_fan_speed="0" -s material_flow_layer_0="100" -s support_roof_extruder_nr="0" -s support_skip_zag_per_mm="20" -s infill_pattern="cubic" -s roofing_extruder_nr="-1" -s speed_travel_layer_0="100.0" -s wipe_retraction_amount="6.5" -s support_bottom_distance="0" -s machine_nozzle_head_distance="3" -s speed_support_interface="25.0" -s brim_width="8.0" -s machine_disallowed_areas="[[[-117.5, 117.5], [-117.5, 108], [117.5, 108], [117.5, 117.5]], [[-117.5, -108], [-117.5, -117.5], [117.5, -117.5], [117.5, -108]]]" -s support_brim_line_count="10" -s support_roof_density="33.333" -s prime_blob_enable="False" -s cool_min_layer_time_fan_speed_max="10" -s brim_gap="0" -s support_roof_angles="[ ]" -s zig_zaggify_infill="False" -s speed="0" -s max_skin_angle_for_expansion="90" -s wireframe_roof_inset="3" -s bridge_skin_density_2="75" -s support_tree_max_diameter="15" -s wipe_retraction_speed="25" -s material_flow="100" -s support_type="buildplate" -s cutting_mesh="False" -s small_feature_speed_factor="50" -s skin_overlap="10.0" -s infill_enable_travel_optimization="False" -s acceleration_travel_enabled="True" -s cooling="0" -s machine_nozzle_tip_outer_diameter="1" -s cool_fan_speed_min="100.0" -s wall_x_extruder_nr="-1" -s support_roof_height="0.8" -s support_bottom_material_flow="100" -s default_material_print_temperature="210" -s dual="0" -s skin_overlap_mm="0.04" -s bottom_skin_expand_distance="0.8" -s raft_fan_speed="0" -s layer_height="0.2" -s meshfix_keep_open_polygons="False" -s machine_extruder_count="1" -s infill_wipe_dist="0.0" -s min_wall_line_width="0.34" -s support_use_towers="True" -s cross_infill_pocket_size="6.0" -s material_surface_energy="100" -s speed_support_bottom="25.0" -s material_break_preparation_speed="2" -s acceleration_print="500" -s support_line_distance="0" -s min_bead_width="0.34" -s meshfix_union_all="True" -s raft_interface_line_spacing="1.0" -s bridge_skin_support_threshold="50" -s wireframe_enabled="False" -s speed_travel="150.0" -s gradual_infill_steps="0" -s machine_height="250" -s support_interface_line_width="0.4" -s machine_max_acceleration_y="500" -s retract_at_layer_change="False" -s print_bed_temperature="60" -s travel="0" -s lightning_infill_overhang_angle="40" -s top_bottom_thickness="0.8" -s wall_0_extruder_nr="-1" -s material_shrinkage_percentage="100.0" -s retraction_combing="noskin" -s infill_line_distance="6.0" -s jerk_travel="8" -s conical_overhang_hole_size="0" -s speed_slowdown_layers="2" -s acceleration_enabled="False" -s resolution="0" -s support_connect_zigzags="True" -s retraction_retract_speed="25" -s machine_endstop_positive_direction_x="False" -s material_maximum_park_duration="300" -s acceleration_support="500" -s bridge_skin_speed_2="12.5" -s wipe_pause="0" -s skin_edge_support_layers="0" -s material_bed_temp_wait="True" -s wipe_retraction_retract_speed="25" -s material_break_speed="25" -s machine_nozzle_temp_enabled="True" -s quality_changes_name="empty" -s prime_tower_wipe_enabled="True" -s speed_wall_x="25.0" -s support_offset="0.8" -s meshfix_maximum_resolution="0.25" -s machine_acceleration="500" -s ironing_inset="0.38" -s z_seam_x="117.5" -s top_bottom_extruder_nr="-1" -s interlocking_depth="2" -s wall_distribution_count="1" -s ooze_shield_enabled="False" -s material_end_of_filament_purge_length="20" -s draft_shield_height="10" -s mold_roof_height="0.5" -s raft_surface_line_width="0.4" -s prime_tower_position_x="232.17499999999998" -s skin_material_flow="100" -s speed_wall="25.0" -s xy_offset_layer_0="0" -s acceleration_support_interface="500" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s wireframe_top_jump="0.6" -s alternate_carve_order="True" -s adaptive_layer_height_variation_step="0.04" -s support_tree_branch_diameter="2" -s command_line_settings="0" -s raft_base_thickness="0.24" -s support_brim_enable="True" -s wireframe_flow_flat="100" -s material_id="empty_material" -s material_print_temp_prepend="True" -s retraction_min_travel="1.5" -s retraction_amount="6.5" -s support_join_distance="2.0" -s infill_mesh="False" -s support_zag_skip_count="0" -s wipe_brush_pos_x="100" -s meshfix_extensive_stitching="False" -s wireframe_roof_drag_along="0.8" -s support_material_flow="100" -s mold_angle="40" -s infill_line_width="0.4" -s mold_enabled="False" -s support_roof_offset="0.0" -s ooze_shield_dist="2" -s travel_avoid_supports="True" -s roofing_material_flow="100" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_size="20" -s skin_angles="[ ]" -s support_extruder_nr="0" -s support_interface_offset="0.0" -s speed_wall_0="25.0" -s brim_line_count="20" -s draft_shield_enabled="False" -s support_tower_maximum_supported_diameter="3.0" -s wall_overhang_angle="90" -s machine_endstop_positive_direction_y="False" -s conical_overhang_enabled="False" -s raft_interface_layers="1" -s support_roof_material_flow="100" -s magic_fuzzy_skin_point_dist="0.8" -s support_infill_sparse_thickness="0.2" -s raft_surface_jerk="8" -s switch_extruder_retraction_speed="20" -s bridge_wall_coast="100" -s roofing_line_width="0.4" -s infill_support_angle="40" -s multiple_mesh_overlap="0.15" -s wall_transition_angle="10" -s jerk_infill="8" -s wipe_retraction_extra_prime_amount="0" -s adaptive_layer_height_variation="0.04" -s raft_base_wall_count="1" -s bottom_thickness="0.8" -s adaptive_layer_height_enabled="False" -s lightning_infill_prune_angle="40" -s material_standby_temperature="150" -s support_pattern="zigzag" -s skin_edge_support_thickness="0" -s raft_jerk="8" -s roofing_pattern="lines" -s ironing_flow="10.0" -s adhesion_extruder_nr="-1" -s material_flush_purge_length="60" -s support_mesh="False" -s machine_depth="235" -s support_brim_width="4" -s support_bottom_stair_step_width="5.0" -s machine_name="Creality Ender-3" -s material_crystallinity="False" -s support_xy_distance="0.8" -s raft_interface_jerk="8" -s material_break_retracted_position="-50" -s top_bottom_pattern="lines" -s small_feature_speed_factor_0="50" -s acceleration_topbottom="500" -s raft_base_line_width="0.8" -s wall_x_material_flow_layer_0="100" -s wireframe_flow="100" -s jerk_topbottom="8" -s material_anti_ooze_retracted_position="-4" -s jerk_skirt_brim="8" -s support_interface_skip_height="0.2" -s prime_tower_position_y="210.17499999999998" -s support_fan_enable="False" -s infill_offset_y="0" -s prime_tower_line_width="0.4" -s roofing_monotonic="True" -s wipe_hop_speed="5" -s machine_center_is_zero="False" -s skirt_brim_extruder_nr="-1" -s initial_bottom_layers="4" -s machine_endstop_positive_direction_z="True" -s raft_smoothing="5" -s machine_max_acceleration_x="500" -s support_roof_enable="True" -s raft_base_line_spacing="1.6" -s machine_max_jerk_z="0.4" -s layer_height_0="0.2" -s initial_layer_line_width_factor="100.0" -s wall_material_flow="100" -s skirt_gap="10.0" -s support_roof_line_width="0.4" -s support_bottom_density="33.333" -s remove_empty_first_layers="True" -s jerk_support_interface="8" -s jerk_support_bottom="8" -s raft_surface_thickness="0.2" -s machine_heated_bed="True" -s raft_base_fan_speed="0" -s skin_line_width="0.4" -s support_roof_line_distance="2.4000240002400024" -s wall_line_width_x="0.4" -s travel_retract_before_outer_wall="True" -s cool_fan_enabled="True" -s platform_adhesion="0" -s wall_transition_filter_deviation="0.1" -s magic_fuzzy_skin_point_density="1.25" -s connect_skin_polygons="False" -s raft_base_extruder_nr="0" -s retraction_hop="0.2" -s material_brand="" -s extruder_prime_pos_x="0" -s wipe_hop_enable="False" -s skin_material_flow_layer_0="100" -s machine_nozzle_id="unknown" -s flow_rate_max_extrusion_offset="0" -s machine_use_extruder_offset_to_offset_coords="True" -s bridge_skin_density_3="80" -s travel_speed="150.0" -s prime_tower_brim_enable="False" -s material_print_temperature="210" -s material_end_of_filament_purge_speed="0.5" -s ironing_monotonic="False" -s acceleration_print_layer_0="500" -s time="22:13:22" -s machine_always_write_active_tool="False" -s adhesion_type="none" -s speed_z_hop="5" -s skin_no_small_gaps_heuristic="False" -s support_interface_material_flow="100" -s acceleration_ironing="500" -s wireframe_bottom_delay="0" -s machine_buildplate_type="glass" -s fill_outline_gaps="False" -s support_tower_roof_angle="65" -s support="0" -s support_angle="45" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s jerk_wall_0="8" -s gradual_support_infill_steps="0" -s acceleration_layer_0="500" -s cool_min_temperature="210" -s raft_surface_line_spacing="0.4" -s raft_base_acceleration="500" -s support_bottom_angles="[ ]" -s support_initial_layer_line_distance="0" -s infill_extruder_nr="-1" -s bridge_sparse_infill_max_density="0" -s infill_overlap_mm="0.12" -s support_top_distance="0.02" -s wireframe_up_half_speed="0.3" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s speed_layer_0="20.0" -s top_thickness="0.8" -s acceleration_wall_x="500" -s travel_avoid_other_parts="True" -s top_bottom="0" -s jerk_support_roof="8" -s connect_infill_polygons="False" -s support_structure="normal" -s speed_topbottom="25.0" -s z_seam_position="back" -s support_infill_extruder_nr="0" -s ironing_line_spacing="0.1" -s magic_fuzzy_skin_thickness="0.3" -s raft_interface_thickness="0.30000000000000004" -s material_diameter="1.75" -s raft_interface_speed="18.75" -s machine_max_feedrate_y="500" -s meshfix_maximum_travel_resolution="0.25" -s raft_margin="15" -s wireframe_height="3" -s raft_interface_extruder_nr="0" -s prime_tower_flow="100" -s material_break_temperature="50" -s machine_nozzle_expansion_angle="45" -s default_material_bed_temperature="50" -s bridge_settings_enabled="False" -s cool_fan_speed_max="100.0" -s wall_0_material_flow_layer_0="100" -s infill_material_flow="100" -s support_bottom_extruder_nr="0" -s bridge_skin_density="100" -s brim_inside_margin="2.5" -s lightning_infill_support_angle="40" -s infill_sparse_thickness="0.2" -s support_supported_skin_fan_speed="100" -s support_bottom_wall_count="0" -s switch_extruder_prime_speed="20" -s quality_name="Standard Quality" -s machine_steps_per_mm_z="50" -s machine_extruders_share_nozzle="False" -s wall_overhang_speed_factor="100" -s wireframe_roof_fall_down="2" -s optimize_wall_printing_order="True" -s material_break_preparation_temperature="210" -s meshfix="0" -s support_line_width="0.4" -s acceleration_wall="500" -s support_bottom_line_width="0.4" -s ooze_shield_angle="60" -s raft_speed="25.0" -s raft_remove_inside_corners="False" -s wireframe_top_delay="0" -s ironing_enabled="False" -s interlocking_orientation="22.5" -s max_extrusion_before_wipe="10" -s wireframe_flow_connection="100" -s material_flush_purge_speed="0.5" -s support_bottom_stair_step_min_slope="10.0" -s mold_width="5" -s bridge_skin_speed_3="12.5" -s material_final_print_temperature="210" -s jerk_prime_tower="8" -s material_anti_ooze_retraction_speed="5" -s wireframe_nozzle_clearance="1" -s machine_max_jerk_xy="10" -s bridge_fan_speed="100" -s interlocking_enable="False" -s jerk_travel_layer_0="8" -s magic_spiralize="False" -s machine_start_gcode="; Ender 3 Custom Start G-code
2023-03-30 22:13:22,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G92 E0 ; Reset Extruder
2023-03-30 22:13:22,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G28 ; Home all axes
2023-03-30 22:13:22,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G29 ; ABL
2023-03-30 22:13:22,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
2023-03-30 22:13:22,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
2023-03-30 22:13:22,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
2023-03-30 22:13:22,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
2023-03-30 22:13:22,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
2023-03-30 22:13:22,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G92 E0 ; Reset Extruder
2023-03-30 22:13:22,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
2023-03-30 22:13:22,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" -s acceleration_skirt_brim="500" -s material_alternate_walls="False" -s bridge_fan_speed_2="0" -s machine_feeder_wheel_diameter="10.0" -s jerk_print_layer_0="8" -s support_skip_some_zags="False" -s jerk_ironing="8" -s interlocking_boundary_avoidance="2" -s wireframe_printspeed_bottom="5" -s draft_shield_height_limitation="full" -s material_initial_print_temperature="210" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s gantry_height="25" -s wall_0_inset="0" -s material_name="empty" -s retraction_hop_after_extruder_switch_height="0.2" -s support_conical_angle="30" -s jerk_support_infill="8" -s switch_extruder_retraction_speeds="20" -s meshfix_union_all_remove_holes="False" -s jerk_wall="8" -s center_object="False" -s machine_end_gcode="G91 ;Relative positioning
2023-03-30 22:13:22,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 E-2 F2700 ;Retract a bit
2023-03-30 22:13:22,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 E-2 Z0.2 F2400 ;Retract and raise Z
2023-03-30 22:13:22,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 X5 Y5 F3000 ;Wipe out
2023-03-30 22:13:22,772 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 Z10 ;Raise Z more
2023-03-30 22:13:22,772 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G90 ;Absolute positioning
2023-03-30 22:13:22,773 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:22,773 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] G1 X0 Y235 ;Present print
2023-03-30 22:13:22,773 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] M106 S0 ;Turn-off fan
2023-03-30 22:13:22,774 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] M104 S0 ;Turn-off hotend
2023-03-30 22:13:22,774 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] M140 S0 ;Turn-off bed
2023-03-30 22:13:22,774 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:22,775 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] M84 X Y E ;Disable all steppers but Z
2023-03-30 22:13:22,775 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] " -s ironing_only_highest_layer="False" -s ironing_pattern="zigzag" -s roofing_angles="[ ]" -s machine_head_with_fans_polygon="[[-26, 34], [-26, -32], [32, -32], [32, 34]]" -s support_roof_pattern="grid" -s machine_heated_build_volume="False" -s bridge_skin_material_flow_3="110" -s skin_monotonic="False" -s conical_overhang_angle="50" -s alternate_extra_perimeter="False" -s material_bed_temperature_layer_0="60" -s nozzle_disallowed_areas="[]" -s infill_mesh_order="0" -s skirt_brim_material_flow="100" -s wireframe_roof_outer_delay="0.2" -s skin_preshrink="0.8" -s raft_acceleration="500" -s acceleration_infill="500" -s material_break_preparation_retracted_position="-16" -s wall_0_wipe_dist="0.0" -s support_interface_pattern="grid" -s minimum_support_area="2" -s cool_fan_full_at_height="0.6000000000000001" -s cool_fan_speed_0="0" -s speed_print_layer_0="20.0" -s speed_support="25.0" -s brim_outside_only="True" -s slicing_tolerance="middle" -s material_bed_temperature="60" -s machine_heat_zone_length="16" -s infill_sparse_density="20" -s infill_overlap="30.0" -s wireframe_straight_before_down="20" -s machine_shape="rectangular" -s support_conical_enabled="False" -s build_volume_temperature="28" -s layer_start_y="0.0" -s wipe_retraction_prime_speed="25" -s experimental="0" -s infill_support_enabled="False" -s draft_shield_dist="10" -s bridge_skin_material_flow="60" -s material_print_temp_wait="True" -s speed_prime_tower="25.0" -s wireframe_strategy="compensate" -s raft_surface_extruder_nr="0" -s smooth_spiralized_contours="True" -s wireframe_drag_along="0.6" -s jerk_layer_0="8" -s support_interface_enable="True" -s carve_multiple_volumes="False" -s retraction_extrusion_window="10" -s wipe_retraction_enable="True" -s machine_nozzle_heat_up_speed="2.0" -s z_seam_type="back" -s machine_scale_fan_speed_zero_to_one="False" -s wireframe_printspeed_up="5" -s material_guid="" -s wipe_hop_amount="0.2" -s support_tree_branch_distance="1" -s infill_wall_line_count="0" -s travel_avoid_distance="0.625" -s support_conical_min_width="5.0" -s wall_line_count="2" -s machine_steps_per_mm_x="50" -s jerk_enabled="False" -s wireframe_flat_delay="0.1" -s retraction_hop_enabled="False" -s wipe_repeat_count="5" -s machine_max_feedrate_e="50" -s machine_extruders_share_heater="False" -s switch_extruder_retraction_amount="16" -s z_seam_corner="z_seam_corner_weighted" -s jerk_travel_enabled="True" -s raft_interface_line_width="0.8" -s material_print_temperature_layer_0="210" -s wireframe_printspeed="5" -s infill_angles="[ ]" -s support_bottom_offset="0.0" -s raft_surface_acceleration="500" -s day="Thu" -s support_mesh_drop_down="True" -s raft_airgap="0.3" -s roofing_layer_count="0" -s cool_min_speed="10" -s material_shrinkage_percentage_z="100.0" -s skirt_line_count="3" -s material="0" -s speed_equalize_flow_width_factor="100.0" -s support_tree_branch_diameter_angle="5" -s bottom_skin_preshrink="0.8" -s infill_before_walls="False" -s top_skin_expand_distance="0.8" -s acceleration_wall_0="500" -s infill_offset_x="0" -s support_tower_diameter="3.0" -s support_xy_overrides_z="xy_overrides_z" -s bridge_skin_material_flow_2="100" -s prime_tower_min_volume="6" -s acceleration_support_infill="500" -s machine_nozzle_size="0.4" -s raft_base_jerk="8" -s machine_extruders_shared_nozzle_initial_retraction="0" -s speed_infill="50.0" -s wireframe_printspeed_flat="5" -s retraction_hop_after_extruder_switch="True" -s support_interface_height="0.8" -s jerk_wall_x="8" -s min_skin_width_for_expansion="4.898587196589413e-17" -s support_xy_distance_overhang="0.4" -s cool_lift_head="False" -s support_interface_density="33.333" -s clean_between_layers="False" -s machine_show_variants="False" -s retraction_speed="25" -s min_feature_size="0.1" -s lightning_infill_straightening_angle="40" -s z_seam_y="235" -s wall_transition_filter_distance="100" -s blackmagic="0" -s machine_firmware_retract="False" -s acceleration_support_roof="500" -s support_bottom_pattern="grid" -s meshfix_maximum_deviation="0.025" -s interlocking_beam_layer_count="2" -s machine_max_feedrate_z="10" -s skirt_brim_minimal_length="250" -s wall_line_width_0="0.4" -s top_layers="4" -s material_bed_temp_prepend="True" -s jerk_roofing="8" -s meshfix_maximum_extrusion_area_deviation="50000" -s speed_print="50.0" -s adaptive_layer_height_threshold="0.2" -s wireframe_printspeed_down="5" -s machine_settings="0" -s shell="0" -s xy_offset="0" -s support_extruder_nr_layer_0="0" -s support_bottom_enable="True" -s print_temperature="210" -s material_type="empty" -s date="30-03-2023" -s initial_extruder_nr="0" -s nozzle_offsetting_for_disallowed_areas="True" -e0 -s support_bottom_line_distance="2.4000240002400024" -s brim_replaces_support="False" -s minimum_interface_area="10" -s retraction_combing_max_distance="30" -s z_seam_relative="False" -s support_interface_wall_count="0" -s retraction_count_max="100" -s skin_outline_count="1" -s machine_extruder_end_pos_y="0" -s speed_roofing="25.0" -s material_no_load_move_factor="0.940860215" -s mesh_position_x="0" -s zig_zaggify_support="False" -s material_adhesion_tendency="0" -s small_feature_max_length="0.0" -s top_layers="0" -s gradual_infill_step_height="1.5" -s raft_interface_acceleration="500" -s wipe_retraction_amount="5" -s top_skin_preshrink="0.8" -s minimum_roof_area="10" -s extruder_prime_pos_abs="False" -s cross_support_density_image="" -s min_infill_area="0" -s raft_interface_fan_speed="0" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s support_bottom_height="0.8" -s machine_nozzle_offset_y="0" -s machine_min_cool_heat_time_window="50.0" -s machine_extruder_start_code="" -s interlocking_beam_width="0.8" -s wall_x_material_flow="100" -s support_bottom_stair_step_height="0" -s small_hole_max_size="0" -s min_feature_size="0.1" -s machine_nozzle_cool_down_speed="2.0" -s extruder_nr="0" -s raft_surface_speed="25.0" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s machine_extruder_end_pos_x="0" -s coasting_volume="0.064" -s min_odd_wall_line_width="0.34" -s cool_fan_speed="100.0" -s retraction_enable="True" -s magic_mesh_surface_mode="normal" -s retraction_extra_prime_amount="0" -s layer_start_x="0.0" -s minimum_bottom_area="10" -s support_z_distance="0.02" -s raft_surface_layers="2" -s bridge_enable_more_layers="True" -s support_wall_count="1" -s acceleration_support_bottom="500" -s speed_ironing="16.666666666666668" -s extruder_prime_pos_z="0" -s retraction_prime_speed="45" -s bridge_skin_speed="12.5" -s wall_thickness="0.8" -s gradual_support_infill_step_height="1" -s speed_support_infill="25.0" -s mesh_position_z="0" -s wall_line_width="0.4" -s wall_0_material_flow="100" -s skirt_brim_speed="20.0" -s coasting_speed="90" -s acceleration_travel_layer_0="500" -s coasting_min_volume="0.8" -s speed_support_roof="25.0" -s support_infill_angles="[ ]" -s inset_direction="inside_out" -s bridge_wall_material_flow="50" -s min_skin_width_for_expansion="0.0" -s bridge_fan_speed_3="0" -s top_bottom_pattern_0="lines" -s acceleration_roofing="500" -s cool_fan_full_layer="4" -s support_roof_wall_count="0" -s wall_transition_length="0.4" -s raft_interface_line_width="0.8" -s acceleration_travel="500" -s hole_xy_offset="0" -s infill="0" -s extruder_prime_pos_y="0" -s acceleration_prime_tower="500" -s infill_multiplier="1" -s cross_infill_density_image="" -s magic_fuzzy_skin_enabled="False" -s jerk_print="8" -s min_even_wall_line_width="0.34" -s switch_extruder_extra_prime_amount="0" -s jerk_support="8" -s machine_steps_per_mm_y="50" -s bridge_wall_speed="12.5" -s support_tree_collision_resolution="0.2" -s bottom_layers="999999" -s material_extrusion_cool_down_speed="0.7" -s support_interface_angles="[ ]" -s cool_min_layer_time="10" -s material_flow_layer_0="100" -s raft_surface_fan_speed="0" -s speed_travel_layer_0="100.0" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s brim_width="8.0" -s speed_support_interface="25.0" -s support_brim_line_count="10" -s support_roof_density="33.333" -s brim_gap="0" -s cool_min_layer_time_fan_speed_max="10" -s speed="0" -s zig_zaggify_infill="False" -s prime_blob_enable="False" -s support_roof_angles="[ ]" -s support_xy_overrides_z="xy_overrides_z" -s max_skin_angle_for_expansion="90" -s support_tree_max_diameter="15" -s bridge_skin_density_2="75" -s wipe_retraction_speed="45" -s skin_overlap="10.0" -s infill_enable_travel_optimization="False" -s cooling="0" -s machine_nozzle_tip_outer_diameter="1" -s cool_fan_speed_min="100.0" -s support_bottom_material_flow="100" -s default_material_print_temperature="200" -s dual="0" -s bottom_skin_expand_distance="0.8" -s skin_overlap_mm="0.04" -s small_feature_speed_factor="50" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.0" -s support_use_towers="True" -s cross_infill_pocket_size="0.4" -s material_surface_energy="100" -s speed_support_bottom="25.0" -s material_break_preparation_speed="2" -s acceleration_print="500" -s min_bead_width="0.34" -s raft_interface_line_spacing="1.0" -s meshfix_union_all="True" -s support_line_distance="0" -s bridge_skin_support_threshold="50" -s speed_travel="150.0" -s gradual_infill_steps="0" -s support_interface_line_width="0.4" -s retract_at_layer_change="False" -s travel="0" -s speed_equalize_flow_width_factor="100.0" -s top_bottom_thickness="0.8" -s lightning_infill_overhang_angle="40" -s cool_min_speed="10.0" -s resolution="0" -s line_width="0.4" -s support_connect_zigzags="True" -s retraction_retract_speed="45" -s machine_endstop_positive_direction_x="False" -s material_maximum_park_duration="300" -s acceleration_support="500" -s bridge_skin_speed_2="12.5" -s skin_edge_support_layers="0" -s wipe_pause="0" -s wipe_retraction_retract_speed="45" -s machine_nozzle_temp_enabled="True" -s material_break_speed="25" -s prime_tower_wipe_enabled="True" -s support_offset="0.8" -s speed_wall_x="25.0" -s meshfix_maximum_resolution="0.25" -s mold_roof_height="0.5" -s raft_surface_line_width="0.4" -s material_end_of_filament_purge_length="20" -s xy_offset_layer_0="0" -s speed_wall="25.0" -s skin_material_flow="100" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_support_interface="500" -s lightning_infill_straightening_angle="40" -s z_seam_y="235" -s support_tree_branch_diameter="2" -s raft_base_thickness="0.24" -s support_brim_enable="True" -s command_line_settings="0" -s retraction_min_travel="1.5" -s retraction_amount="5" -s support_join_distance="2.0" -s support_zag_skip_count="0" -s wipe_brush_pos_x="100" -s mold_enabled="False" -s support_roof_offset="0.0" -s roofing_material_flow="100" -s magic_fuzzy_skin_outside_only="False" -s travel_avoid_supports="True" -s support_interface_offset="0.0" -s brim_line_count="20" -s speed_wall_0="25.0" -s machine_endstop_positive_direction_y="False" -s wall_overhang_angle="90" -s support_tower_maximum_supported_diameter="3.0" -s skirt_line_count="3" -s conical_overhang_enabled="False" -s raft_interface_layers="1" -s support_roof_material_flow="100" -s magic_fuzzy_skin_point_dist="0.8" -s support_infill_sparse_thickness="0.2" -s switch_extruder_retraction_speed="20" -s raft_surface_jerk="8" -s bridge_wall_coast="100" -s roofing_line_width="0.4" -s multiple_mesh_overlap="0.15" -s infill_support_angle="40" -s wall_transition_angle="10" -s jerk_infill="8" -s wipe_retraction_extra_prime_amount="0" -s lightning_infill_prune_angle="40" -s material_standby_temperature="180" -s skin_edge_support_thickness="0" -s raft_jerk="8" -s support_pattern="zigzag" -s infill_offset_x="0" -s roofing_pattern="lines" -s ironing_flow="10.0" -s material_flush_purge_length="60" -s bottom_thickness="0.8" -s meshfix_extensive_stitching="False" -s infill_line_width="0.4" -s mold_angle="40" -s support_material_flow="100" -s material_crystallinity="False" -s support_bottom_stair_step_width="5.0" -s support_xy_distance="0.8" -s support_brim_width="4" -s raft_interface_jerk="8" -s material_break_retracted_position="-50" -s top_bottom_pattern="lines" -s small_feature_speed_factor_0="50" -s raft_base_line_width="0.8" -s acceleration_topbottom="500" -s material_anti_ooze_retracted_position="-4" -s jerk_topbottom="8" -s jerk_skirt_brim="8" -s infill_offset_y="0" -s raft_base_speed="18.75" -s roofing_monotonic="True" -s prime_tower_line_width="0.4" -s wipe_hop_speed="5" -s initial_bottom_layers="999999" -s machine_endstop_positive_direction_z="True" -s raft_smoothing="5" -s raft_base_line_spacing="1.6" -s support_roof_enable="True" -s wall_material_flow="100" -s skirt_gap="10.0" -s jerk_support_interface="8" -s machine_extruder_start_pos_abs="False" -s jerk_support_bottom="8" -s raft_surface_thickness="0.2" -s raft_base_fan_speed="0" -s skin_line_width="0.4" -s support_roof_line_distance="2.4000240002400024" -s wall_line_width_x="0.4" -s cool_fan_enabled="True" -s platform_adhesion="0" -s wall_transition_filter_deviation="0.1" -s retraction_hop="0.2" -s extruder_prime_pos_x="0" -s skin_material_flow_layer_0="100" -s wipe_hop_enable="False" -s machine_nozzle_id="unknown" -s material_end_of_filament_purge_speed="0.5" -s material_print_temperature="205.0" -s ironing_monotonic="False" -s acceleration_print_layer_0="500" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s speed_z_hop="5" -s skin_no_small_gaps_heuristic="False" -s support_interface_material_flow="100" -s acceleration_ironing="500" -s fill_outline_gaps="False" -s support_tower_roof_angle="65" -s skin_angles="[ ]" -s support="0" -s support_angle="45" -s jerk_wall_0="8" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s gradual_support_infill_steps="0" -s acceleration_layer_0="500" -s cool_min_temperature="205.0" -s raft_surface_line_spacing="0.4" -s raft_base_acceleration="500" -s support_bottom_angles="[ ]" -s support_initial_layer_line_distance="0" -s bridge_sparse_infill_max_density="0" -s bridge_skin_density_3="80" -s infill_overlap_mm="0" -s support_top_distance="0.02" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s speed_layer_0="20.0" -s top_thickness="0.8" -s acceleration_wall_x="500" -s machine_extruder_start_pos_x="0" -s travel_avoid_other_parts="True" -s material_flow="100" -s connect_infill_polygons="False" -s jerk_support_roof="8" -s top_bottom="0" -s speed_topbottom="25.0" -s z_seam_position="back" -s magic_fuzzy_skin_thickness="0.3" -s raft_surface_acceleration="500" -s raft_interface_thickness="0.30000000000000004" -s raft_interface_speed="18.75" -s material_diameter="1.75" -s speed_infill="50.0" -s prime_tower_flow="100" -s cool_fan_speed_max="100.0" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="100" -s bridge_skin_density="100" -s brim_inside_margin="2.5" -s machine_extruder_end_code="" -s lightning_infill_support_angle="40" -s support_supported_skin_fan_speed="100" -s infill_sparse_thickness="0.2" -s z_seam_x="117.5" -s ironing_inset="0.38" -s raft_fan_speed="0" -s meshfix_keep_open_polygons="False" -s switch_extruder_prime_speed="20" -s support_bottom_wall_count="0" -s machine_steps_per_mm_z="50" -s wall_overhang_speed_factor="100" -s optimize_wall_printing_order="True" -s material_break_temperature="50" -s material_break_preparation_temperature="205.0" -s meshfix="0" -s support_line_width="0.4" -s acceleration_wall="500" -s raft_speed="25.0" -s ironing_enabled="False" -s machine_extruder_end_pos_abs="False" -s max_extrusion_before_wipe="10" -s support_skip_zag_per_mm="20" -s infill_pattern="concentric" -s support_interface_skip_height="0.2" -s support_fan_enable="False" -s material_flush_purge_speed="0.5" -s alternate_extra_perimeter="False" -s machine_extruder_cooling_fan_number="0" -s jerk_travel="8" -s infill_line_distance="0.4" -s conical_overhang_hole_size="0" -s support_bottom_stair_step_min_slope="10.0" -s mold_width="5" -s bridge_skin_speed_3="12.5" -s material_final_print_temperature="205.0" -s jerk_prime_tower="8" -s bridge_fan_speed="100" -s jerk_travel_layer_0="8" -s acceleration_skirt_brim="500" -s material_alternate_walls="False" -s bridge_fan_speed_2="0" -s machine_feeder_wheel_diameter="10.0" -s jerk_print_layer_0="8" -s support_skip_some_zags="False" -s jerk_ironing="8" -s support_roof_line_width="0.4" -s support_bottom_density="33.333" -s expand_skins_expand_distance="0.8" -s support_tree_angle="40" -s material_initial_print_temperature="205.0" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s skirt_brim_minimal_length="250" -s wall_0_inset="0" -s retraction_hop_after_extruder_switch_height="0.2" -s support_conical_angle="30" -s jerk_support_infill="8" -s switch_extruder_retraction_speeds="20" -s meshfix_union_all_remove_holes="False" -s jerk_wall="8" -s center_object="False" -s ironing_only_highest_layer="False" -s ironing_pattern="zigzag" -s roofing_angles="[ ]" -s support_interface_height="0.8" -s support_roof_pattern="grid" -s ironing_line_spacing="0.1" -s bridge_skin_material_flow_3="110" -s skin_monotonic="False" -s conical_overhang_angle="50" -s skirt_brim_material_flow="100" -s skirt_brim_line_width="0.4" -s meshfix_maximum_travel_resolution="0.25" -s skin_preshrink="0.8" -s raft_acceleration="500" -s acceleration_infill="500" -s wall_0_wipe_dist="0.0" -s material_break_preparation_retracted_position="-16" -s support_interface_pattern="grid" -s machine_nozzle_size="0.4" -s raft_base_jerk="8" -s minimum_support_area="2" -s cool_fan_full_at_height="0.6000000000000001" -s cool_fan_speed_0="0" -s speed_print_layer_0="20.0" -s speed_support="25.0" -s slicing_tolerance="middle" -s brim_outside_only="True" -s machine_heat_zone_length="16" -s infill_sparse_density="100" -s infill_overlap="30.0" -s support_conical_enabled="False" -s layer_start_y="0.0" -s wipe_retraction_prime_speed="45" -s experimental="0" -s infill_support_enabled="False" -s bridge_skin_material_flow="60" -s jerk_roofing="8" -s speed_prime_tower="25.0" -s meshfix_maximum_extrusion_area_deviation="50000" -s jerk_layer_0="8" -s support_interface_enable="True" -s retraction_extrusion_window="10" -s wipe_retraction_enable="True" -s machine_extruder_start_pos_y="0" -s machine_nozzle_heat_up_speed="2.0" -s z_seam_type="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s initial_layer_line_width_factor="100.0" -s wipe_hop_amount="0.2" -s support_tree_branch_distance="1" -s infill_wall_line_count="0" -s support_roof_height="0.8" -s travel_avoid_distance="0.625" -s support_conical_min_width="5.0" -s wall_line_count="2" -s material_anti_ooze_retraction_speed="5" -s machine_steps_per_mm_x="50" -s retraction_hop_enabled="False" -s wipe_repeat_count="5" -s switch_extruder_retraction_amount="16" -s z_seam_corner="z_seam_corner_weighted" -s mesh_position_y="0" -s machine_nozzle_offset_x="0" -s infill_angles="[ ]" -s support_tree_branch_diameter_angle="5" -s support_bottom_offset="0.0" -s raft_airgap="0.3" -s support_bottom_pattern="grid" -s roofing_layer_count="0" -s raft_margin="15" -s wall_distribution_count="1" -s material="0" -s support_bottom_line_width="0.4" -s bottom_skin_preshrink="0.8" -s wall_x_material_flow_layer_0="100" -s infill_before_walls="False" -s top_skin_expand_distance="0.8" -s acceleration_wall_0="500" -s support_tower_diameter="3.0" -s material_print_temperature_layer_0="205.0" -s bridge_skin_material_flow_2="100" -s prime_tower_min_volume="6" -s acceleration_support_infill="500" -s machine_extruders_shared_nozzle_initial_retraction="0" -s retraction_hop_after_extruder_switch="True" -s jerk_wall_x="8" -s support_xy_distance_overhang="0.4" -s cool_lift_head="False" -s support_interface_density="33.333" -s clean_between_layers="False" -s retraction_speed="45" -s meshfix_maximum_deviation="0.025" -s wall_transition_filter_distance="100" -s blackmagic="0" -s wall_line_width_0="0.4" -s acceleration_support_roof="500" -s speed_print="50.0" -s machine_settings="0" -s shell="0" -s xy_offset="0" -s support_bottom_enable="True" -g -e0 -l "0" -s extruder_nr="0"
2023-03-30 22:13:22,776 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:22,776 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.775] [info] Progress: start accomplished in 0s
2023-03-30 22:13:22,777 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.775] [info] Starting slice...
2023-03-30 22:13:22,777 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.775] [info] Slicing model...
2023-03-30 22:13:22,778 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.776] [info] Slice of mesh took 0 seconds
2023-03-30 22:13:22,778 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.777] [info] Make polygons took 0 seconds
2023-03-30 22:13:22,779 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.777] [info] Progress: slice accomplished in 0s
2023-03-30 22:13:22,779 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.777] [info] Starting layerparts...
2023-03-30 22:13:22,780 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.778] [info] Progress: layerparts accomplished in 0s
2023-03-30 22:13:22,780 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.778] [info] Starting inset+skin...
2023-03-30 22:13:22,807 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.807] [info] Layer count: 74
2023-03-30 22:13:22,808 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.807] [info] Progress: inset+skin accomplished in 0.03099999999994907s
2023-03-30 22:13:22,808 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.807] [info] Starting support...
2023-03-30 22:13:22,840 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.839] [info] Progress: support accomplished in 0.03099999999994907s
2023-03-30 22:13:22,840 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.839] [info] Starting export...
2023-03-30 22:13:22,857 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.856] [info] Progress: export accomplished in 0.016000000000531145s
2023-03-30 22:13:22,857 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.857] [info] Sending 74 layers.
2023-03-30 22:13:22,857 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.857] [info] Total time elapsed 0.07800000000042928s.
2023-03-30 22:13:22,858 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:22,858 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.857] [info] Print time (s): 221
2023-03-30 22:13:22,858 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.857] [info] Print time (hr|min|s): 0h 3m 41s
2023-03-30 22:13:22,859 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:22.857] [info] Filament (mm^3): 161
2023-03-30 22:13:23,115 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-03-30 22:13:23.115] [info] Closing connection.
2023-03-30 22:13:23,154 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [344]: Creating post processing plugin view.
2023-03-30 22:13:23,234 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [354]: Post processing view created.
2023-03-30 22:13:23,286 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:23,287 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Cura_SteamEngine version 5.3.0-beta
2023-03-30 22:13:23,287 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Copyright (C) 2022 Ultimaker
2023-03-30 22:13:23,288 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:23,288 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is free software: you can redistribute it and/or modify
2023-03-30 22:13:23,289 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] it under the terms of the GNU Affero General Public License as published by
2023-03-30 22:13:23,289 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] the Free Software Foundation, either version 3 of the License, or
2023-03-30 22:13:23,290 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] (at your option) any later version.
2023-03-30 22:13:23,290 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:23,291 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is distributed in the hope that it will be useful,
2023-03-30 22:13:23,291 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2023-03-30 22:13:23,291 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2023-03-30 22:13:23,292 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] GNU Affero General Public License for more details.
2023-03-30 22:13:23,292 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend]
2023-03-30 22:13:23,293 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] You should have received a copy of the GNU Affero General Public License
2023-03-30 22:13:23,293 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2023-03-30 22:13:23,304 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [770]: Slicing took 0.9804220199584961 seconds
2023-03-30 22:13:23,305 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [771]: Number of models per buildplate: {0: 5}
2023-03-30 22:13:23,305 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [785]: See if there is more to slice...
2023-03-30 22:13:23,306 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [200]: Socket state changed to Closing
2023-03-30 22:13:23,306 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [224]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2023-03-30 22:13:23,307 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [202]: Socket state changed to Closed
2023-03-30 22:13:23,309 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [969]: Backend finished slicing. Resetting process and socket.
2023-03-30 22:13:23,413 - WARNING - [MainThread] UM.Qt.QtApplication.onQmlWarning [444]: file:///C:/Program Files/UltiMaker Cura 5.3.0-beta.1/share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2023-03-30 22:13:23,413 - WARNING - [MainThread] UM.Qt.QtApplication.onQmlWarning [444]: file:///C:/Program Files/UltiMaker Cura 5.3.0-beta.1/share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2023-03-30 22:13:23,454 - WARNING - [MainThread] UM.Qt.QtApplication.onQmlWarning [444]: file:///C:/Program Files/UltiMaker Cura 5.3.0-beta.1/PyQt6/Qt6/qml/UM/MenuItem.qml:19:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 66. Use 'sequences: [
nallath
commented
1 year ago The logs indicate that something was loaded and sliced. You even moved it across the build volume. So i'm not quite sure what issue you are having.
Could you perhaps share the stl file that has the issue?
github-actions[bot]
commented
1 year ago This issue has been automatically closed because there has been no response to our request for more information from the original author. With only the information that is currently in the issue, we don't have enough information to take action. Please reach out if you have or find the answers we need so that we can investigate further.
Application Version
5.3.0
Platform
windows 10
Printer
Ender v2 pro
Reproduction steps
1.i opened cura 2.i dropped a file into cura
Actual results
it says its there but its not showing up
Expected results
something should have showed up
Checklist of files to include
Additional information & file uploads
no