search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.21k stars 2.08k forks source link

Cura 4.1.0 adds something to model (in the brim area) #5838

Open OldChris opened 5 years ago

OldChris commented 5 years ago

Short description : Cura adds something to the model in the brim area.

Software : CURA 4.1.0

Operating System Windows 10 Pro 64-bit CPU AMD FX-6100 18 °C Zambezi 32nm Technology RAM 8,00GB Dual-Channel DDR3 @ 666MHz (9-9-9-24) Motherboard MSI 760GM-P23(FX) (MS-7641) (CPU1) 27 °C Graphics hp L2035 (1600x1200@60Hz) hp L2035 (1600x1200@60Hz) 3067MB ATI Radeon 3000 Graphics (MSI) Storage 465GB SAMSUNG HD502HJ ATA Device (SATA ) 36 °C Optical Drives No optical disk drives detected Audio High Definition Audio Device Graphics Monitor 1 Name hp L2035 on ATI Radeon 3000 Graphics State Enabled, Output devices support Multiple displays Extended, Secondary, Enabled Monitor Width 1600 Monitor Height 1200 Monitor BPP 32 bits per pixel Monitor Frequency 60 Hz Device \.\DISPLAY1\Monitor0 Monitor 2 Name hp L2035 on ATI Radeon 3000 Graphics Current Resolution 1067x800 pixels Work Resolution 1067x769 pixels State Enabled, Output devices support Multiple displays Extended, Primary, Enabled Monitor Width 1600 Monitor Height 1200 Monitor BPP 32 bits per pixel Monitor Frequency 60 Hz Device \.\DISPLAY2\Monitor0 ATI Radeon 3000 Graphics Manufacturer ATI Model Radeon 3000 Graphics GPU RS780 Device ID 1002-9616 Subvendor MSI (1462) Current Performance Level Level 0 Current GPU Clock 196 MHz Current Memory Clock 800 MHz Current Shader Clock 800 MHz Die Size 64 mm² Release Date 2009 DirectX Support 10.0 DirectX Shader Model 4.0 OpenGL Support 2.0 GPU Clock 350,0 MHz Driver version 8.970.100.9001 ROPs 4 Shaders 40 unified Memory Type HyperMemory Memory 3067 MB Pixel Fillrate 1,4 GPixels/s Texture Fillrate 1,4 GTexels/s Count of performance levels : 2 Level 1 - "Perf Level 0" Level 2 - "Perf Level 1"

Printer Ultimaker 2

Expected results The print is just a box with a hole in it's center. CURA adds this small attachement.

Additional Information See screenshots and OpenSCAD files, and STL file

best regards, Chris.

UM2_test.zip

test_OpenSCAD.zip

Test_3Dprinted Test_In_CURA4_1_0 Test_In_OpenSCAD Test_OldCuraVersion
Ghostkeeper commented 5 years ago

Hmm, yeah that's strange. There is no extra geometry there or anything. It's printed as support but there is nothing to support there.

Disabling Use Towers removes the effect so it clearly thinks that there is an edge to support there.

OldChris commented 5 years ago

Disabling Use Towers removes the effect ....

Thanks for spotting that ! My other PC (laptop) now also shows this appendix.

GregValiant commented 1 week ago

I'm cleaning house. Is this still a problem with current Cura versions (5.8.0 and up)? Can I close this?