search

VoronDesign / Voron-Documentation

Sources of the documentation website for all Voron 3D printers
https://docs.vorondesign.com/
GNU General Public License v3.0
232 stars 188 forks source link

Missing explanation for component removal on mini12864 displays #329

Open manisto opened 1 year ago

manisto commented 1 year ago

On the Mini12864 documenation, it tells you to remove certain components from the display board. In the case of BTT, it's R1 and C6. However, the display seems to work fine (at least for BTT), so an explanation of why this is needed would be nice. Also, if this is important, the assembly manual would benefit from a link to that documentation page in the relevant assembly steps.

shiftingtech commented 1 year ago

Point of clarification: it tells you that if you are using the btt display on a fysetc spider, you need to remove those components. Are you running that specific combination?

manisto commented 1 year ago

Hello, sorry for the late reply. I thought I read the documentation thoroughly, but it seems like I still missed a few key points. Both my display and my board is BTT, so I do not have to do anything to my display. So the only thing I guess would be nice would be an explanation on why you need to remove components from your display if you have a Fysetc Spider board.