[Vz330] Front Door Hinge Part 2 has 4.2mm holes to mount panel, but panel has 3.2mm holes

VzBoT3D / VzBoT-Vz330

The VzBot 3D-printer

1.02k stars 160 forks source link

[Vz330] Front Door Hinge Part 2 has 4.2mm holes to mount panel, but panel has 3.2mm holes #42

Closed Arakon closed 1 year ago

Arakon commented 2 years ago

BOM specifies 4mm bolts, too.

I helped it using thin nylon washers, which just so happened to have the size of an M4 screw head.

Please either adjust the hole diameter in the enclosure step files or STL, and adjust the BOM.

Also, the build manual specifies M4x40 bolts to connect the two hinge halves, but that's too short, M4x50 is required at least.

simonvez commented 1 year ago

Hi there, thanks for reporting this. sorry for the late reply. The front door holes were corrected a while ago. Its using M4 so the holes were changed to 4.3mm. Thanks