Examples | Product Link | Schematic | Status | Recommended level |
---|---|---|---|---|
SIM800L IP5306 20190610 | Product link | Schematic | ✅ | ⭐ |
SIM800L IP5306 20200811 | Product link | Schematic | ✅ | ⭐⭐ |
SIM800L AXP192 20200327 | ❌ | Schematic | ❌ | ⭐⭐⭐ |
SIM800C AXP192 20200609 | ❌ | Schematic | ❌ | ⭐⭐⭐ |
Press the RESET button on the board, if the serial port communication is normal, then you should see
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
waiting for download
For IP5306 power supply, the 5V power pin connected to the USB board is the output, and the voltage is boosted by IP5306 power supply chip. According to the manual, its maximum output current is 2.4a. Do not connect USB, can 5V input.
When using AXP192 power supply, the 5V power pin on the board is the input, and it is connected with USB 5V+. There is no other power output on the board except for the 3.3V output.
If you use the IP5306 version and use a lithium battery to supply power, you must press the reset button to turn on the board.
If you use the AXP192 power management chip, you need to press and hold the PWR button for 2 seconds to turn on the power supply. By default, the AXP192 will be powered on when the battery is inserted.
SIM800 built-in firmware update tool Because SIMCOM has not adapted and updated the new system for a long time, it is not necessarily available to upgrade the built-in firmware tool. Most users are stuck waiting for download. Please be informed