Open a834003831 opened 1 month ago
On which HW are you trying to use that kernel?
你打算在哪个硬件上使用这个内核?
R4S,4G
On RPI4 I had problems with 6.6 on USB power. The unit went in read-only after a reset. It could be a similar issue
On RPI4 I had problems with 6.6 on USB power. The unit went in read-only after a reset. It could be a similar issue
I have encountered problems in many versions: after inserting a USB card and restarting, the system displays as read-only and needs to flash again. The problems we encountered are likely to be the same
在RPI4上,我在USB电源上遇到了6.6的问题。重置后,设备进入只读状态。这可能是一个类似的问题
I am planning to use the 5.4 kernel because I need idle mode. I tried to build a VM virtual machine compilation in Windows, but encountered many problems and was unable to compile successfully
I solved using kernel 5.4 Please consider that kernel 6.6 is coming with a RC and therfore "unstable" release of omr
我用内核5.4解决了请考虑内核6.6将会有一个RC,因此omr的发行版是“不稳定的”
Which country are you using it in? Is your daily usage environment for office work or something else? I hope to get in touch with you. Which social media platform is more convenient for you? Since I'm using it in China, there are very few people to communicate and learn from, so I hope to exchange experiences with more people.
I have tried burning this version multiple times, but it still cannot start properly. Sqashfs and ext4 are both unable to start
SD card replacement attempted - unable to resolve
Replaced burning tools such as BalenaEtcher and Rufus - unable to solve
And I found that the squashfs version, after burning, opened the SD with DiskGenius, and one of the folders showed: unformatted
Snapshot address: https://snapshots.openmptcprouter.com/5.4/r4s/targets/rockchip/armv8/?C=N&O=D
Snapshot name:openmptcprouter-v0.61rc3-6.6-r0+27346-c7ba5574f5-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img openmptcprouter-v0.61rc3-6.6-r0+27346-c7ba5574f5-rockchip-armv8-friendlyarm_nanopi-r4s-squashfs-sysupgrade.img