Problem with 2 USB-Ethernet 4G

Expected Behavior

2x interface USB / ethernet with dongle 4G Huawei E3372h on eth1 and eth2

Actual Behavior

the first dongle 4G is OK The 2nd key inserted eth2 is well created but no dialogue with the key 4G

Steps to Reproduce the Problem

insert first dongle usb 4g, eth1 OK
insert 2eme dongle usb 4g, eth2 created
no dialog eth2 et dongle 4G

Specifications

OpenMPTCProuter version: 0.49
OpenMPTCProuter VPS version: 0.993
OpenMPTCProuter platform: RPI3B+

Log Core:

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.115 (circleci@default-a60549f1-c64a-4989-81a4-b540a65a2209) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r0+9945-bc85640cdc)) #0 SMP Mon May 6 10:43:01 2019 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] cma: Reserved 16 MiB at 0x000000003a400000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] DMA zone: 3792 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:31 [ 0.000000] random: get_random_bytes called from start_kernel+0x80/0x390 with crng_init=0 [ 0.000000] percpu: Embedded 19 pages/cpu s40344 r8192 d29288 u77824 [ 0.000000] pcpu-alloc: s40344 r8192 d29288 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896 [ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Memory: 928040K/970752K available (5118K kernel code, 342K rwdata, 1480K rodata, 320K init, 496K bss, 26328K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008580000 ( 5120 KB) [ 0.000000] .rodata : 0xffffff8008580000 - 0xffffff8008700000 ( 1536 KB) [ 0.000000] .init : 0xffffff8008700000 - 0xffffff8008750000 ( 320 KB) [ 0.000000] .data : 0xffffff8008750000 - 0xffffff80087a5808 ( 343 KB) [ 0.000000] .bss : 0xffffff80087a5808 - 0xffffff8008821850 ( 497 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf00ed0000 ( 14 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03b400000 ( 948 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000193] Console: colour dummy device 80x25 [ 0.000678] console [tty1] enabled [ 0.000710] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000741] pid_max: default: 32768 minimum: 301 [ 0.000893] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000930] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.002011] ASID allocator initialised with 65536 entries [ 0.002127] Hierarchical SRCU implementation. [ 0.002697] smp: Bringing up secondary CPUs ... [ 0.003109] Detected VIPT I-cache on CPU1 [ 0.003162] CPU1: Booted secondary processor [410fd034] [ 0.003720] Detected VIPT I-cache on CPU2 [ 0.003756] CPU2: Booted secondary processor [410fd034] [ 0.004246] Detected VIPT I-cache on CPU3 [ 0.004280] CPU3: Booted secondary processor [410fd034] [ 0.004399] smp: Brought up 1 node, 4 CPUs [ 0.004479] SMP: Total of 4 processors activated. [ 0.004498] CPU features: detected feature: 32-bit EL0 Support [ 0.004520] CPU: All CPU(s) started at EL2 [ 0.004554] alternatives: patching kernel code [ 0.005338] devtmpfs: initialized [ 0.014173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014221] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.014971] pinctrl core: initialized pinctrl subsystem [ 0.015278] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT [ 0.015825] NET: Registered protocol family 16 [ 0.019678] cpuidle: using governor ladder [ 0.019718] cpuidle: using governor menu [ 0.020013] vdso: 2 pages (1 code @ ffffff8008584000, 1 data @ ffffff8008754000) [ 0.021435] DMA: preallocated 256 KiB pool for atomic allocations [ 0.021520] Serial: AMBA PL011 UART driver [ 0.023027] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.023448] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.047572] bcm2835-dma 3f007000.dma: DMA legacy API manager at ffffff8008025000, dmachans=0x1 [ 0.048681] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_5v0[0]' [ 0.048908] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_3v3[0]' [ 0.049391] SCSI subsystem initialized [ 0.049590] usbcore: registered new interface driver usbfs [ 0.049656] usbcore: registered new interface driver hub [ 0.049720] usbcore: registered new device driver usb [ 0.050074] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36 [ 0.051081] clocksource: Switched to clocksource arch_sys_counter [ 0.058489] NET: Registered protocol family 2 [ 0.059233] default registered [ 0.059250] default registered [ 0.059263] MPTCP: Stable release v0.94.3 [ 0.059285] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.059420] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.059620] TCP: Hash tables configured (established 8192 bind 8192) [ 0.059822] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.059879] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.060155] NET: Registered protocol family 1 [ 0.061099] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT [ 0.061516] Crashlog allocated RAM at address 0x3f00000 [ 0.061644] workingset: timestamp_bits=62 max_order=18 bucket_order=0 [ 0.067082] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.068870] io scheduler noop registered [ 0.068891] io scheduler deadline registered (default) [ 0.069007] io scheduler cfq registered [ 0.069511] pinctrl-bcm2835 3f200000.gpio: get 00000000 (0 => gpio_in) [ 0.069520] pinctrl-bcm2835 3f200000.gpio: get 00000000 (1 => gpio_in) [ 0.069529] pinctrl-bcm2835 3f200000.gpio: get 00000000 (2 => gpio_in) [ 0.069538] pinctrl-bcm2835 3f200000.gpio: get 00000000 (3 => gpio_in) [ 0.069546] pinctrl-bcm2835 3f200000.gpio: get 00000000 (4 => gpio_in) [ 0.069555] pinctrl-bcm2835 3f200000.gpio: get 00000000 (5 => gpio_in) [ 0.069563] pinctrl-bcm2835 3f200000.gpio: get 00000000 (6 => gpio_in) [ 0.069572] pinctrl-bcm2835 3f200000.gpio: get 00000000 (7 => gpio_in) [ 0.069580] pinctrl-bcm2835 3f200000.gpio: get 00000000 (8 => gpio_in) [ 0.069589] pinctrl-bcm2835 3f200000.gpio: get 00000000 (9 => gpio_in) [ 0.069598] pinctrl-bcm2835 3f200000.gpio: get 00012000 (10 => gpio_in) [ 0.069606] pinctrl-bcm2835 3f200000.gpio: get 00012000 (11 => gpio_in) [ 0.069615] pinctrl-bcm2835 3f200000.gpio: get 00012000 (12 => gpio_in) [ 0.069624] pinctrl-bcm2835 3f200000.gpio: get 00012000 (13 => gpio_in) [ 0.069632] pinctrl-bcm2835 3f200000.gpio: get 00012000 (14 => alt5) [ 0.069641] pinctrl-bcm2835 3f200000.gpio: get 00012000 (15 => alt5) [ 0.069650] pinctrl-bcm2835 3f200000.gpio: get 00012000 (16 => gpio_in) [ 0.069658] pinctrl-bcm2835 3f200000.gpio: get 00012000 (17 => gpio_in) [ 0.069667] pinctrl-bcm2835 3f200000.gpio: get 00012000 (18 => gpio_in) [ 0.069675] pinctrl-bcm2835 3f200000.gpio: get 00012000 (19 => gpio_in) [ 0.069684] pinctrl-bcm2835 3f200000.gpio: get 08000000 (20 => gpio_in) [ 0.069692] pinctrl-bcm2835 3f200000.gpio: get 08000000 (21 => gpio_in) [ 0.069701] pinctrl-bcm2835 3f200000.gpio: get 08000000 (22 => gpio_in) [ 0.069709] pinctrl-bcm2835 3f200000.gpio: get 08000000 (23 => gpio_in) [ 0.069718] pinctrl-bcm2835 3f200000.gpio: get 08000000 (24 => gpio_in) [ 0.069726] pinctrl-bcm2835 3f200000.gpio: get 08000000 (25 => gpio_in) [ 0.069735] pinctrl-bcm2835 3f200000.gpio: get 08000000 (26 => gpio_in) [ 0.069744] pinctrl-bcm2835 3f200000.gpio: get 08000000 (27 => gpio_in) [ 0.069752] pinctrl-bcm2835 3f200000.gpio: get 08000000 (28 => gpio_in) [ 0.069761] pinctrl-bcm2835 3f200000.gpio: get 08000000 (29 => gpio_out) [ 0.069770] pinctrl-bcm2835 3f200000.gpio: get 00000009 (30 => gpio_out) [ 0.069778] pinctrl-bcm2835 3f200000.gpio: get 00000009 (31 => gpio_out) [ 0.069787] pinctrl-bcm2835 3f200000.gpio: get 00000009 (32 => gpio_in) [ 0.069795] pinctrl-bcm2835 3f200000.gpio: get 00000009 (33 => gpio_in) [ 0.069803] pinctrl-bcm2835 3f200000.gpio: get 00000009 (34 => gpio_in) [ 0.069812] pinctrl-bcm2835 3f200000.gpio: get 00000009 (35 => gpio_in) [ 0.069820] pinctrl-bcm2835 3f200000.gpio: get 00000009 (36 => gpio_in) [ 0.069828] pinctrl-bcm2835 3f200000.gpio: get 00000009 (37 => gpio_in) [ 0.069837] pinctrl-bcm2835 3f200000.gpio: get 00000009 (38 => gpio_in) [ 0.069845] pinctrl-bcm2835 3f200000.gpio: get 00000009 (39 => gpio_in) [ 0.069854] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (40 => alt0) [ 0.069862] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (41 => alt0) [ 0.069871] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (42 => alt0) [ 0.069879] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (43 => alt0) [ 0.069888] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (44 => gpio_in) [ 0.069896] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (45 => gpio_in) [ 0.069905] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (46 => gpio_in) [ 0.069913] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (47 => gpio_out) [ 0.069922] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (48 => alt3) [ 0.069930] pinctrl-bcm2835 3f200000.gpio: get 3f200924 (49 => alt3) [ 0.069939] pinctrl-bcm2835 3f200000.gpio: get 00000fff (50 => alt3) [ 0.069947] pinctrl-bcm2835 3f200000.gpio: get 00000fff (51 => alt3) [ 0.069956] pinctrl-bcm2835 3f200000.gpio: get 00000fff (52 => alt3) [ 0.069964] pinctrl-bcm2835 3f200000.gpio: get 00000fff (53 => alt3) [ 0.070232] gpio gpiochip0: (pinctrl-bcm2835): added GPIO chardev (254:0) [ 0.070315] gpiochip_setup_dev: registered GPIOs 0 to 53 on device: gpiochip0 (pinctrl-bcm2835) [ 0.070414] pinctrl-bcm2835 3f200000.gpio: try to register 54 pins ... [ 0.070422] pinctrl core: registered pin 0 (gpio0) on pinctrl-bcm2835 [ 0.070429] pinctrl core: registered pin 1 (gpio1) on pinctrl-bcm2835 [ 0.070434] pinctrl core: registered pin 2 (gpio2) on pinctrl-bcm2835 [ 0.070439] pinctrl core: registered pin 3 (gpio3) on pinctrl-bcm2835 [ 0.070444] pinctrl core: registered pin 4 (gpio4) on pinctrl-bcm2835 [ 0.070453] pinctrl core: registered pin 5 (gpio5) on pinctrl-bcm2835 [ 0.070458] pinctrl core: registered pin 6 (gpio6) on pinctrl-bcm2835 [ 0.070463] pinctrl core: registered pin 7 (gpio7) on pinctrl-bcm2835 [ 0.070468] pinctrl core: registered pin 8 (gpio8) on pinctrl-bcm2835 [ 0.070473] pinctrl core: registered pin 9 (gpio9) on pinctrl-bcm2835 [ 0.070478] pinctrl core: registered pin 10 (gpio10) on pinctrl-bcm2835 [ 0.070483] pinctrl core: registered pin 11 (gpio11) on pinctrl-bcm2835 [ 0.070488] pinctrl core: registered pin 12 (gpio12) on pinctrl-bcm2835 [ 0.070493] pinctrl core: registered pin 13 (gpio13) on pinctrl-bcm2835 [ 0.070498] pinctrl core: registered pin 14 (gpio14) on pinctrl-bcm2835 [ 0.070503] pinctrl core: registered pin 15 (gpio15) on pinctrl-bcm2835 [ 0.070507] pinctrl core: registered pin 16 (gpio16) on pinctrl-bcm2835 [ 0.070513] pinctrl core: registered pin 17 (gpio17) on pinctrl-bcm2835 [ 0.070517] pinctrl core: registered pin 18 (gpio18) on pinctrl-bcm2835 [ 0.070522] pinctrl core: registered pin 19 (gpio19) on pinctrl-bcm2835 [ 0.070527] pinctrl core: registered pin 20 (gpio20) on pinctrl-bcm2835 [ 0.070532] pinctrl core: registered pin 21 (gpio21) on pinctrl-bcm2835 [ 0.070537] pinctrl core: registered pin 22 (gpio22) on pinctrl-bcm2835 [ 0.070542] pinctrl core: registered pin 23 (gpio23) on pinctrl-bcm2835 [ 0.070547] pinctrl core: registered pin 24 (gpio24) on pinctrl-bcm2835 [ 0.070552] pinctrl core: registered pin 25 (gpio25) on pinctrl-bcm2835 [ 0.070556] pinctrl core: registered pin 26 (gpio26) on pinctrl-bcm2835 [ 0.070561] pinctrl core: registered pin 27 (gpio27) on pinctrl-bcm2835 [ 0.070566] pinctrl core: registered pin 28 (gpio28) on pinctrl-bcm2835 [ 0.070571] pinctrl core: registered pin 29 (gpio29) on pinctrl-bcm2835 [ 0.070576] pinctrl core: registered pin 30 (gpio30) on pinctrl-bcm2835 [ 0.070581] pinctrl core: registered pin 31 (gpio31) on pinctrl-bcm2835 [ 0.070586] pinctrl core: registered pin 32 (gpio32) on pinctrl-bcm2835 [ 0.070591] pinctrl core: registered pin 33 (gpio33) on pinctrl-bcm2835 [ 0.070596] pinctrl core: registered pin 34 (gpio34) on pinctrl-bcm2835 [ 0.070601] pinctrl core: registered pin 35 (gpio35) on pinctrl-bcm2835 [ 0.070606] pinctrl core: registered pin 36 (gpio36) on pinctrl-bcm2835 [ 0.070613] pinctrl core: registered pin 37 (gpio37) on pinctrl-bcm2835 [ 0.070619] pinctrl core: registered pin 38 (gpio38) on pinctrl-bcm2835 [ 0.070624] pinctrl core: registered pin 39 (gpio39) on pinctrl-bcm2835 [ 0.070628] pinctrl core: registered pin 40 (gpio40) on pinctrl-bcm2835 [ 0.070634] pinctrl core: registered pin 41 (gpio41) on pinctrl-bcm2835 [ 0.070638] pinctrl core: registered pin 42 (gpio42) on pinctrl-bcm2835 [ 0.070643] pinctrl core: registered pin 43 (gpio43) on pinctrl-bcm2835 [ 0.070648] pinctrl core: registered pin 44 (gpio44) on pinctrl-bcm2835 [ 0.070653] pinctrl core: registered pin 45 (gpio45) on pinctrl-bcm2835 [ 0.070658] pinctrl core: registered pin 46 (gpio46) on pinctrl-bcm2835 [ 0.070663] pinctrl core: registered pin 47 (gpio47) on pinctrl-bcm2835 [ 0.070668] pinctrl core: registered pin 48 (gpio48) on pinctrl-bcm2835 [ 0.070673] pinctrl core: registered pin 49 (gpio49) on pinctrl-bcm2835 [ 0.070678] pinctrl core: registered pin 50 (gpio50) on pinctrl-bcm2835 [ 0.070682] pinctrl core: registered pin 51 (gpio51) on pinctrl-bcm2835 [ 0.070687] pinctrl core: registered pin 52 (gpio52) on pinctrl-bcm2835 [ 0.070692] pinctrl core: registered pin 53 (gpio53) on pinctrl-bcm2835 [ 0.070704] pinctrl-bcm2835 3f200000.gpio: no hogs found [ 0.071639] gpio gpiochip1: (brcmexp-gpio): added GPIO chardev (254:1) [ 0.071721] gpiochip_setup_dev: registered GPIOs 128 to 135 on device: gpiochip1 (brcmexp-gpio) [ 0.072330] BCM2708FB: allocated DMA memory fa440000 [ 0.072378] BCM2708FB: allocated DMA channel 0 @ ffffff8008025000 [ 0.079403] Console: switching to colour frame buffer device 82x26 [ 0.083507] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.085421] serial8250 serial8250: no of_node; not parsing pinctrl DT [ 0.085534] pinctrl core: add 0 pinctrl maps [ 0.086078] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.089571] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.099665] brd: module loaded [ 0.105600] loop: module loaded [ 0.107624] mdio_bus fixed-0: GPIO lookup for consumer reset [ 0.107632] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 0.107640] mdio_bus fixed-0: lookup for GPIO reset failed [ 0.107660] libphy: Fixed MDIO Bus: probed [ 0.109410] usbcore: registered new interface driver lan78xx [ 0.111179] usbcore: registered new interface driver smsc95xx [ 0.112805] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.142300] dwc_otg 3f980000.usb: base=0x08b60000 [ 0.344073] Core Release: 2.80a [ 0.345625] Setting default values for core params [ 0.347191] Finished setting default values for core params [ 0.548941] Using Buffer DMA mode [ 0.550449] Periodic Transfer Interrupt Enhancement - disabled [ 0.552038] Multiprocessor Interrupt Enhancement - disabled [ 0.553641] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.555235] Dedicated Tx FIFOs mode [ 0.557264] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0x08b71000 dma = 0xfa454000 len=9024 [ 0.560553] FIQ FSM acceleration enabled for : [ 0.560553] Non-periodic Split Transactions [ 0.560553] Periodic Split Transactions [ 0.560553] High-Speed Isochronous Endpoints [ 0.560553] Interrupt/Control Split Transaction hack enabled [ 0.568142] dwc_otg: Microframe scheduler enabled [ 0.568194] WARN::hcd_init_fiq:486: MPHI regs_base at 0x0803d000 [ 0.569801] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.571389] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.573057] dwc_otg 3f980000.usb: irq 15, io mem 0x00000000 [ 0.574698] Init: Port Power? op_state=1 [ 0.576276] Init: Power Port (0) [ 0.578010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.579650] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.581294] usb usb1: Product: DWC OTG Controller [ 0.582895] usb usb1: Manufacturer: Linux 4.14.115 dwc_otg_hcd [ 0.584501] usb usb1: SerialNumber: 3f980000.usb [ 0.586585] hub 1-0:1.0: no of_node; not parsing pinctrl DT [ 0.586614] hub 1-0:1.0: USB hub found [ 0.588191] hub 1-0:1.0: 1 port detected [ 0.590169] dwc_otg: FIQ enabled [ 0.590173] dwc_otg: NAK holdoff enabled [ 0.590176] dwc_otg: FIQ split-transaction FSM enabled [ 0.590184] Module dwc_common_port init [ 0.590372] usbcore: registered new interface driver uas [ 0.591984] usbcore: registered new interface driver usb-storage [ 0.593564] mousedev: PS/2 mouse device common for all mice [ 0.595546] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.597301] bcm2835-cpufreq: min=600000 max=1400000 [ 0.601263] sdhci: Secure Digital Host Controller Interface driver [ 0.601957] sdhci: Copyright(c) Pierre Ossman [ 0.602691] pinctrl core: add 12 pinctrl maps [ 0.602707] pinctrl-bcm2835 3f200000.gpio: found group selector 34 for gpio34 [ 0.602722] pinctrl-bcm2835 3f200000.gpio: found group selector 35 for gpio35 [ 0.602730] pinctrl-bcm2835 3f200000.gpio: found group selector 36 for gpio36 [ 0.602739] pinctrl-bcm2835 3f200000.gpio: found group selector 37 for gpio37 [ 0.602747] pinctrl-bcm2835 3f200000.gpio: found group selector 38 for gpio38 [ 0.602756] pinctrl-bcm2835 3f200000.gpio: found group selector 39 for gpio39 [ 0.602765] pinctrl-bcm2835 3f200000.gpio: request pin 34 (gpio34) for 3f300000.mmc [ 0.602771] pinctrl-bcm2835 3f200000.gpio: read 00000009 (34 => gpio_in) [ 0.602775] pinctrl-bcm2835 3f200000.gpio: write 00007009 (34 <= alt3) [ 0.602783] pinctrl-bcm2835 3f200000.gpio: request pin 35 (gpio35) for 3f300000.mmc [ 0.602787] pinctrl-bcm2835 3f200000.gpio: read 00007009 (35 => gpio_in) [ 0.602790] pinctrl-bcm2835 3f200000.gpio: write 0003f009 (35 <= alt3) [ 0.602796] pinctrl-bcm2835 3f200000.gpio: request pin 36 (gpio36) for 3f300000.mmc [ 0.602800] pinctrl-bcm2835 3f200000.gpio: read 0003f009 (36 => gpio_in) [ 0.602804] pinctrl-bcm2835 3f200000.gpio: write 001ff009 (36 <= alt3) [ 0.602810] pinctrl-bcm2835 3f200000.gpio: request pin 37 (gpio37) for 3f300000.mmc [ 0.602813] pinctrl-bcm2835 3f200000.gpio: read 001ff009 (37 => gpio_in) [ 0.602817] pinctrl-bcm2835 3f200000.gpio: write 00fff009 (37 <= alt3) [ 0.602823] pinctrl-bcm2835 3f200000.gpio: request pin 38 (gpio38) for 3f300000.mmc [ 0.602827] pinctrl-bcm2835 3f200000.gpio: read 00fff009 (38 => gpio_in) [ 0.602830] pinctrl-bcm2835 3f200000.gpio: write 07fff009 (38 <= alt3) [ 0.602836] pinctrl-bcm2835 3f200000.gpio: request pin 39 (gpio39) for 3f300000.mmc [ 0.602840] pinctrl-bcm2835 3f200000.gpio: read 07fff009 (39 => gpio_in) [ 0.602844] pinctrl-bcm2835 3f200000.gpio: write 3ffff009 (39 <= alt3) [ 0.602907] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 0.603625] pinctrl-bcm2835 3f200000.gpio: read 3ffff009 (34 => alt3) [ 0.603629] pinctrl-bcm2835 3f200000.gpio: write 3fff8009 (34 <= gpio_in) [ 0.603634] pinctrl-bcm2835 3f200000.gpio: read 3fff8009 (35 => alt3) [ 0.603638] pinctrl-bcm2835 3f200000.gpio: write 3ffc0009 (35 <= gpio_in) [ 0.603642] pinctrl-bcm2835 3f200000.gpio: read 3ffc0009 (36 => alt3) [ 0.603645] pinctrl-bcm2835 3f200000.gpio: write 3fe00009 (36 <= gpio_in) [ 0.603650] pinctrl-bcm2835 3f200000.gpio: read 3fe00009 (37 => alt3) [ 0.603653] pinctrl-bcm2835 3f200000.gpio: write 3f000009 (37 <= gpio_in) [ 0.603657] pinctrl-bcm2835 3f200000.gpio: read 3f000009 (38 => alt3) [ 0.603661] pinctrl-bcm2835 3f200000.gpio: write 38000009 (38 <= gpio_in) [ 0.603665] pinctrl-bcm2835 3f200000.gpio: read 38000009 (39 => alt3) [ 0.603669] pinctrl-bcm2835 3f200000.gpio: write 00000009 (39 <= gpio_in) [ 0.603721] pinctrl core: add 6 pinctrl maps [ 0.603731] pinctrl-bcm2835 3f200000.gpio: found group selector 48 for gpio48 [ 0.603738] pinctrl-bcm2835 3f200000.gpio: found group selector 49 for gpio49 [ 0.603744] pinctrl-bcm2835 3f200000.gpio: found group selector 50 for gpio50 [ 0.603751] pinctrl-bcm2835 3f200000.gpio: found group selector 51 for gpio51 [ 0.603757] pinctrl-bcm2835 3f200000.gpio: found group selector 52 for gpio52 [ 0.603763] pinctrl-bcm2835 3f200000.gpio: found group selector 53 for gpio53 [ 0.603768] pinctrl-bcm2835 3f200000.gpio: request pin 48 (gpio48) for 3f202000.mmc [ 0.603772] pinctrl-bcm2835 3f200000.gpio: read 3f200924 (48 => alt3) [ 0.603776] pinctrl-bcm2835 3f200000.gpio: trans 38200924 (48 <= gpio_in) [ 0.603779] pinctrl-bcm2835 3f200000.gpio: write 3c200924 (48 <= alt0) [ 0.603783] pinctrl-bcm2835 3f200000.gpio: request pin 49 (gpio49) for 3f202000.mmc [ 0.603787] pinctrl-bcm2835 3f200000.gpio: read 3c200924 (49 => alt3) [ 0.603791] pinctrl-bcm2835 3f200000.gpio: trans 04200924 (49 <= gpio_in) [ 0.603794] pinctrl-bcm2835 3f200000.gpio: write 24200924 (49 <= alt0) [ 0.603798] pinctrl-bcm2835 3f200000.gpio: request pin 50 (gpio50) for 3f202000.mmc [ 0.603802] pinctrl-bcm2835 3f200000.gpio: read 00000fff (50 => alt3) [ 0.603805] pinctrl-bcm2835 3f200000.gpio: trans 00000ff8 (50 <= gpio_in) [ 0.603809] pinctrl-bcm2835 3f200000.gpio: write 00000ffc (50 <= alt0) [ 0.603813] pinctrl-bcm2835 3f200000.gpio: request pin 51 (gpio51) for 3f202000.mmc [ 0.603817] pinctrl-bcm2835 3f200000.gpio: read 00000ffc (51 => alt3) [ 0.603820] pinctrl-bcm2835 3f200000.gpio: trans 00000fc4 (51 <= gpio_in) [ 0.603824] pinctrl-bcm2835 3f200000.gpio: write 00000fe4 (51 <= alt0) [ 0.603828] pinctrl-bcm2835 3f200000.gpio: request pin 52 (gpio52) for 3f202000.mmc [ 0.603831] pinctrl-bcm2835 3f200000.gpio: read 00000fe4 (52 => alt3) [ 0.603835] pinctrl-bcm2835 3f200000.gpio: trans 00000e24 (52 <= gpio_in) [ 0.603838] pinctrl-bcm2835 3f200000.gpio: write 00000f24 (52 <= alt0) [ 0.603842] pinctrl-bcm2835 3f200000.gpio: request pin 53 (gpio53) for 3f202000.mmc [ 0.603846] pinctrl-bcm2835 3f200000.gpio: read 00000f24 (53 => alt3) [ 0.603850] pinctrl-bcm2835 3f200000.gpio: trans 00000124 (53 <= gpio_in) [ 0.603853] pinctrl-bcm2835 3f200000.gpio: write 00000924 (53 <= alt0) [ 0.603896] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.604616] pinctrl-bcm2835 3f200000.gpio: read 24200924 (48 => alt0) [ 0.604619] pinctrl-bcm2835 3f200000.gpio: write 20200924 (48 <= gpio_in) [ 0.604623] pinctrl-bcm2835 3f200000.gpio: read 20200924 (49 => alt0) [ 0.604627] pinctrl-bcm2835 3f200000.gpio: write 00200924 (49 <= gpio_in) [ 0.604631] pinctrl-bcm2835 3f200000.gpio: read 00000924 (50 => alt0) [ 0.604635] pinctrl-bcm2835 3f200000.gpio: write 00000920 (50 <= gpio_in) [ 0.604639] pinctrl-bcm2835 3f200000.gpio: read 00000920 (51 => alt0) [ 0.604642] pinctrl-bcm2835 3f200000.gpio: write 00000900 (51 <= gpio_in) [ 0.604646] pinctrl-bcm2835 3f200000.gpio: read 00000900 (52 => alt0) [ 0.604650] pinctrl-bcm2835 3f200000.gpio: write 00000800 (52 <= gpio_in) [ 0.604654] pinctrl-bcm2835 3f200000.gpio: read 00000800 (53 => alt0) [ 0.604658] pinctrl-bcm2835 3f200000.gpio: write 00000000 (53 <= gpio_in) [ 0.604691] Error: Driver 'sdhost-bcm2835' is already registered, aborting... [ 0.605414] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.606190] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/act[0]' - status (0) [ 0.606200] pinctrl-bcm2835 3f200000.gpio: request pin 29 (gpio29) for pinctrl-bcm2835:29 [ 0.606205] pinctrl-bcm2835 3f200000.gpio: get 08000000 (29 => gpio_out) [ 0.606208] no flags found for gpios [ 0.606219] pinctrl-bcm2835 3f200000.gpio: read 08000000 (29 => gpio_out) [ 0.606284] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/pwr[0]' - status (0) [ 0.606319] no flags found for gpios [ 0.607679] vchiq: vchiq_init_state: slot_zero = ffffff8008b85000, is_master = 0 [ 0.610917] NET: Registered protocol family 10 [ 0.612158] Segment Routing with IPv6 [ 0.612954] fullmesh registered [ 0.613671] ndiffports registered [ 0.614379] binder registered [ 0.615064] roundrobin registered [ 0.615742] redundant registered [ 0.616425] NET: Registered protocol family 17 [ 0.617150] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.618751] 8021q: 802.1Q VLAN Support v1.8 [ 0.622560] pinctrl core: add 8 pinctrl maps [ 0.622573] pinctrl core: add 2 pinctrl maps [ 0.622591] pinctrl-bcm2835 3f200000.gpio: found group selector 30 for gpio30 [ 0.622606] pinctrl-bcm2835 3f200000.gpio: found group selector 31 for gpio31 [ 0.622614] pinctrl-bcm2835 3f200000.gpio: found group selector 32 for gpio32 [ 0.622622] pinctrl-bcm2835 3f200000.gpio: found group selector 33 for gpio33 [ 0.622630] pinctrl-bcm2835 3f200000.gpio: found group selector 43 for gpio43 [ 0.622641] pinctrl-bcm2835 3f200000.gpio: request pin 30 (gpio30) for 3f201000.serial [ 0.622647] pinctrl-bcm2835 3f200000.gpio: read 00000009 (30 => gpio_out) [ 0.622651] pinctrl-bcm2835 3f200000.gpio: trans 00000008 (30 <= gpio_in) [ 0.622655] pinctrl-bcm2835 3f200000.gpio: write 0000000f (30 <= alt3) [ 0.622663] pinctrl-bcm2835 3f200000.gpio: request pin 31 (gpio31) for 3f201000.serial [ 0.622667] pinctrl-bcm2835 3f200000.gpio: read 0000000f (31 => gpio_out) [ 0.622670] pinctrl-bcm2835 3f200000.gpio: trans 00000007 (31 <= gpio_in) [ 0.622674] pinctrl-bcm2835 3f200000.gpio: write 0000003f (31 <= alt3) [ 0.622680] pinctrl-bcm2835 3f200000.gpio: request pin 32 (gpio32) for 3f201000.serial [ 0.622684] pinctrl-bcm2835 3f200000.gpio: read 0000003f (32 => gpio_in) [ 0.622687] pinctrl-bcm2835 3f200000.gpio: write 000001ff (32 <= alt3) [ 0.622693] pinctrl-bcm2835 3f200000.gpio: request pin 33 (gpio33) for 3f201000.serial [ 0.622697] pinctrl-bcm2835 3f200000.gpio: read 000001ff (33 => gpio_in) [ 0.622701] pinctrl-bcm2835 3f200000.gpio: write 00000fff (33 <= alt3) [ 0.622706] pinctrl-bcm2835 3f200000.gpio: request pin 43 (gpio43) for 3f201000.serial [ 0.622710] pinctrl-bcm2835 3f200000.gpio: read 00200924 (43 => alt0) [ 0.622765] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.623595] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, base_baud = 0) is a PL011 rev2 [ 0.625673] pinctrl core: add 0 pinctrl maps [ 0.625866] console [ttyS0] disabled [ 0.626625] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 151, base_baud = 31250000) is a 16550 [ 0.821121] Indeed it is in host mode hprt0 = 00021501 [ 0.822109] console [ttyS0] enabled [ 0.907997] random: fast init done [ 0.911943] pinctrl core: add 12 pinctrl maps [ 1.031077] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.033966] pinctrl-bcm2835 3f200000.gpio: found group selector 34 for gpio34 [ 1.041542] Indeed it is in host mode hprt0 = 00001101 [ 1.047647] pinctrl-bcm2835 3f200000.gpio: found group selector 35 for gpio35 [ 1.297875] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 1.301384] pinctrl-bcm2835 3f200000.gpio: found group selector 36 for gpio36 [ 1.311338] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.334089] hub 1-1:1.0: no of_node; not parsing pinctrl DT [ 1.340113] pinctrl-bcm2835 3f200000.gpio: found group selector 37 for gpio37 [ 1.588658] pinctrl-bcm2835 3f200000.gpio: found group selector 38 for gpio38 [ 1.588667] pinctrl-bcm2835 3f200000.gpio: found group selector 39 for gpio39 [ 1.588679] pinctrl-bcm2835 3f200000.gpio: request pin 34 (gpio34) for 3f300000.mmc [ 1.588685] pinctrl-bcm2835 3f200000.gpio: read 00000fff (34 => gpio_in) [ 1.588689] pinctrl-bcm2835 3f200000.gpio: write 00007fff (34 <= alt3) [ 1.588694] hub 1-1:1.0: USB hub found [ 1.588696] pinctrl-bcm2835 3f200000.gpio: request pin 35 (gpio35) for 3f300000.mmc [ 1.588701] pinctrl-bcm2835 3f200000.gpio: read 00007fff (35 => gpio_in) [ 1.593250] pinctrl-bcm2835 3f200000.gpio: write 0003ffff (35 <= alt3) [ 1.593256] pinctrl-bcm2835 3f200000.gpio: request pin 36 (gpio36) for 3f300000.mmc [ 1.593260] pinctrl-bcm2835 3f200000.gpio: read 0003ffff (36 => gpio_in) [ 1.593264] pinctrl-bcm2835 3f200000.gpio: write 001fffff (36 <= alt3) [ 1.593282] pinctrl-bcm2835 3f200000.gpio: request pin 37 (gpio37) for 3f300000.mmc [ 1.593287] pinctrl-bcm2835 3f200000.gpio: read 001fffff (37 => gpio_in) [ 1.593290] pinctrl-bcm2835 3f200000.gpio: write 00ffffff (37 <= alt3) [ 1.593310] pinctrl-bcm2835 3f200000.gpio: request pin 38 (gpio38) for 3f300000.mmc [ 1.593312] hub 1-1:1.0: 4 ports detected [ 1.598108] pinctrl-bcm2835 3f200000.gpio: read 00ffffff (38 => gpio_in) [ 1.598112] pinctrl-bcm2835 3f200000.gpio: write 07ffffff (38 <= alt3) [ 1.598118] pinctrl-bcm2835 3f200000.gpio: request pin 39 (gpio39) for 3f300000.mmc [ 1.598122] pinctrl-bcm2835 3f200000.gpio: read 07ffffff (39 => gpio_in) [ 1.598126] pinctrl-bcm2835 3f200000.gpio: write 3fffffff (39 <= alt3) [ 1.598271] mmc-bcm2835 3f300000.mmc: GPIO lookup for consumer wp [ 1.598274] mmc-bcm2835 3f300000.mmc: using device tree for GPIO lookup [ 1.598281] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@7e300000[0]' [ 1.598286] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@7e300000[0]' [ 1.598289] mmc-bcm2835 3f300000.mmc: using lookup tables for GPIO lookup [ 1.598293] mmc-bcm2835 3f300000.mmc: lookup for GPIO wp failed [ 1.598320] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.604944] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 1.671167] pinctrl core: add 6 pinctrl maps [ 1.671184] pinctrl-bcm2835 3f200000.gpio: found group selector 48 for gpio48 [ 1.671191] pinctrl-bcm2835 3f200000.gpio: found group selector 49 for gpio49 [ 1.671197] pinctrl-bcm2835 3f200000.gpio: found group selector 50 for gpio50 [ 1.671203] pinctrl-bcm2835 3f200000.gpio: found group selector 51 for gpio51 [ 1.671210] pinctrl-bcm2835 3f200000.gpio: found group selector 52 for gpio52 [ 1.671216] pinctrl-bcm2835 3f200000.gpio: found group selector 53 for gpio53 [ 1.671230] pinctrl-bcm2835 3f200000.gpio: request pin 48 (gpio48) for 3f202000.mmc [ 1.671236] pinctrl-bcm2835 3f200000.gpio: read 00200924 (48 => gpio_in) [ 1.671239] pinctrl-bcm2835 3f200000.gpio: write 04200924 (48 <= alt0) [ 1.671244] pinctrl-bcm2835 3f200000.gpio: request pin 49 (gpio49) for 3f202000.mmc [ 1.671247] pinctrl-bcm2835 3f200000.gpio: read 04200924 (49 => gpio_in) [ 1.671251] pinctrl-bcm2835 3f200000.gpio: write 24200924 (49 <= alt0) [ 1.671255] pinctrl-bcm2835 3f200000.gpio: request pin 50 (gpio50) for 3f202000.mmc [ 1.671259] pinctrl-bcm2835 3f200000.gpio: read 00000000 (50 => gpio_in) [ 1.671262] pinctrl-bcm2835 3f200000.gpio: write 00000004 (50 <= alt0) [ 1.671266] pinctrl-bcm2835 3f200000.gpio: request pin 51 (gpio51) for 3f202000.mmc [ 1.671270] pinctrl-bcm2835 3f200000.gpio: read 00000004 (51 => gpio_in) [ 1.671274] pinctrl-bcm2835 3f200000.gpio: write 00000024 (51 <= alt0) [ 1.671277] pinctrl-bcm2835 3f200000.gpio: request pin 52 (gpio52) for 3f202000.mmc [ 1.671281] pinctrl-bcm2835 3f200000.gpio: read 00000024 (52 => gpio_in) [ 1.671285] pinctrl-bcm2835 3f200000.gpio: write 00000124 (52 <= alt0) [ 1.671289] pinctrl-bcm2835 3f200000.gpio: request pin 53 (gpio53) for 3f202000.mmc [ 1.671292] pinctrl-bcm2835 3f200000.gpio: read 00000124 (53 => gpio_in) [ 1.671296] pinctrl-bcm2835 3f200000.gpio: write 00000924 (53 <= alt0) [ 1.671541] sdhost: log_buf @ ffffff800885d000 (fa453000) [ 1.677735] sdhost-bcm2835 3f202000.mmc: GPIO lookup for consumer cd [ 1.677738] sdhost-bcm2835 3f202000.mmc: using device tree for GPIO lookup [ 1.677744] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/mmc@7e202000[0]' [ 1.677748] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/mmc@7e202000[0]' [ 1.677751] sdhost-bcm2835 3f202000.mmc: using lookup tables for GPIO lookup [ 1.677755] sdhost-bcm2835 3f202000.mmc: lookup for GPIO cd failed [ 1.677759] sdhost-bcm2835 3f202000.mmc: GPIO lookup for consumer wp [ 1.677762] sdhost-bcm2835 3f202000.mmc: using device tree for GPIO lookup [ 1.677766] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@7e202000[0]' [ 1.677770] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@7e202000[0]' [ 1.677773] sdhost-bcm2835 3f202000.mmc: using lookup tables for GPIO lookup [ 1.677776] sdhost-bcm2835 3f202000.mmc: lookup for GPIO wp failed [ 1.715191] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.722959] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.730709] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.739632] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.751073] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.757803] of_cfs_init [ 1.761010] of_cfs_init: OK [ 1.764905] Waiting for root device /dev/mmcblk0p2... [ 1.844179] mmc1: new high speed SDIO card at address 0001 [ 1.850439] mmcblk mmc1:0001: no of_node; not parsing pinctrl DT [ 1.902492] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.911075] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.920457] mmc0: new high speed SDHC card at address aaaa [ 1.926741] mmcblk mmc0:aaaa: no of_node; not parsing pinctrl DT [ 1.926822] bounce: isa pool size: 16 pages [ 1.931791] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.942285] mmcblk0: p1 p2 [ 1.982839] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 1.991752] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.003040] devtmpfs: mounted [ 2.006985] Freeing unused kernel memory: 320K [ 2.041527] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 [ 2.049241] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.057738] hub 1-1.1:1.0: no of_node; not parsing pinctrl DT [ 2.057758] hub 1-1.1:1.0: USB hub found [ 2.062567] hub 1-1.1:1.0: 3 ports detected [ 2.117226] init: Console is alive [ 2.121660] init: - watchdog - [ 2.420161] dwc_otg_handle_wakeup_detected_intr lxstate = 2 [ 2.588031] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 2.604359] pps_core: LinuxPPS API ver. 1 registered [ 2.610198] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2.626559] PTP clock support registered [ 2.637814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.646749] ehci-platform: EHCI generic platform driver [ 2.660559] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 2.669257] init: - preinit - [ 2.821091] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg [ 2.951357] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800 [ 2.959304] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.969045] lan78xx 1-1.1.1:1.0: no of_node; not parsing pinctrl DT [ 2.972839] random: procd: uninitialized urandom read (4 bytes read) [ 3.076590] random: crng init done [ 3.100848] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Enabling LEDS [ 3.243444] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 3.255930] mdio_bus usb-001:004: GPIO lookup for consumer reset [ 3.255934] mdio_bus usb-001:004: using device tree for GPIO lookup [ 3.255942] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/usb@7e980000/usb1@1/usb1_1@1/usbether@1/mdio[0]' [ 3.255951] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/usb@7e980000/usb1@1/usb1_1@1/usbether@1/mdio[0]' [ 3.255954] mdio_bus usb-001:004: using lookup tables for GPIO lookup [ 3.255958] mdio_bus usb-001:004: lookup for GPIO reset failed [ 3.255961] libphy: lan78xx-mdiobus: probed [ 3.274909] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 4.778377] mount_root: mounting /dev/root [ 4.784387] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 4.799628] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.831589] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 4.844361] urandom-seed: Seeding with /etc/urandom.seed [ 4.893019] procd: - early - [ 4.896899] procd: - watchdog - [ 5.533586] procd: - watchdog - [ 5.537784] procd: - ubus - [ 5.595670] procd: - init - [ 5.807338] kmodloader: loading kernel modules from /etc/modules.d/* [ 5.837171] Modular ISDN core version 1.1.29 [ 5.842481] NET: Registered protocol family 34 [ 5.848604] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 5.855178] 0 virtual devices registered [ 5.861474] DSP module 2.0 [ 5.864991] mISDN_dsp: DSP clocks every 80 samples. This equals 1 jiffies. [ 5.897097] tun: Universal TUN/TAP device driver, 1.6 [ 5.916886] sctp: Hash tables configured (bind 256/256) [ 5.928494] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.948587] ISDN subsystem Rev: 1.1.2.3/ [ 5.948594] 1.1.2.2/ [ 5.953349] 1.1.2.3/ [ 5.956227] 1.1.2.2/ [ 5.959058] 1.1.2.2 [ 5.961858] loaded [ 5.968080] dss1_divert module successfully installed [ 5.974412] PPP BSD Compression module registered [ 5.987417] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.002953] nf_conntrack version 0.5.0 (7680 buckets, 30720 max) [ 6.031674] Netfilter messages via NETLINK v0.30. [ 6.038371] ip_set: protocol 6 [ 6.062925] i2c /dev entries driver [ 6.077773] hidraw: raw HID events driver (C) Jiri Kosina [ 6.089578] pinctrl core: add 2 pinctrl maps [ 6.089605] pinctrl-bcm2835 3f200000.gpio: found group selector 40 for gpio40 [ 6.089612] pinctrl-bcm2835 3f200000.gpio: found group selector 41 for gpio41 [ 6.089620] pinctrl-bcm2835 3f200000.gpio: request pin 40 (gpio40) for soc:audio [ 6.089626] pinctrl-bcm2835 3f200000.gpio: read 24200924 (40 => alt0) [ 6.089631] pinctrl-bcm2835 3f200000.gpio: request pin 41 (gpio41) for soc:audio [ 6.089635] pinctrl-bcm2835 3f200000.gpio: read 24200924 (41 => alt0) [ 6.090675] bcm2835_alsa bcm2835_alsa: card created with 8 channels [ 6.103021] Mirror/redirect action on [ 6.112605] u32 classifier [ 6.116033] input device check on [ 6.120339] Actions configured [ 6.132577] GACT probability on [ 6.138040] Simple TC action Loaded [ 6.207547] arp_tables: arp_tables: (C) 2002 David S. Miller [ 6.216139] usbcore: registered new interface driver asix [ 6.223094] usbcore: registered new interface driver ax88179_178a [ 6.231902] usbcore: registered new interface driver cdc_acm [ 6.238296] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 6.248432] usbcore: registered new interface driver cdc_eem [ 6.255860] usbcore: registered new interface driver cdc_ether [ 6.263623] usbcore: registered new interface driver cdc_ncm [ 6.270591] usbcore: registered new interface driver cdc_subset [ 6.278171] usbcore: registered new interface driver cdc_wdm [ 6.285838] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7 [ 6.294749] Backport generated by backports.git v4.19.32-1-0-g1c4f7569 [ 6.304904] usbcore: registered new interface driver dm9601 [ 6.315367] Ebtables v2.0 registered [ 6.323136] gigaset: Driver for Gigaset 307x [ 6.328127] gigaset: ISDN4Linux interface [ 6.334553] hso: drivers/net/usb/hso.c: Option Wireless [ 6.340751] usbcore: registered new interface driver hso [ 6.347669] usbcore: registered new interface driver huawei_cdc_ncm [ 6.356524] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.364471] usbcore: registered new interface driver ipheth [ 6.373741] usbcore: registered new interface driver kalmia [ 6.380927] usbcore: registered new interface driver kaweth [ 6.388901] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.417200] ctnetlink v0.93: registering with nfnetlink. [ 6.459316] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 6.468518] usbcore: registered new interface driver pegasus [ 6.477633] PPP generic driver version 2.4.2 [ 6.483922] NET: Registered protocol family 24 [ 6.490259] usbcore: registered new interface driver qmi_wwan [ 6.498246] usbcore: registered new interface driver r8152 [ 6.506849] usbcore: registered new interface driver r8712u [ 6.514868] usbcore: registered new interface driver rndis_host [ 6.522457] usbcore: registered new interface driver rtl8150 [ 6.530935] usbcore: registered new interface driver sierra_net [ 6.538642] usbcore: registered new interface driver sr9700 [ 6.546683] usbcore: registered new interface driver usb_gigaset [ 6.553441] usb_gigaset: USB Driver for Gigaset 307x using M105 [ 6.562436] usbcore: registered new interface driver usbhid [ 6.568740] usbhid: USB HID core driver [ 6.576440] usbcore: registered new interface driver usbserial [ 6.583194] usbcore: registered new interface driver usbserial_generic [ 6.590590] usbserial: USB Serial support registered for generic [ 6.598202] usbcore: registered new interface driver visor [ 6.604516] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 6.613569] usbserial: USB Serial support registered for Sony Clie 5.0 [ 6.620944] usbserial: USB Serial support registered for Sony Clie 3.5 [ 6.733708] xt_ndpi v1.2 ndpi 2.8.0 IPv6=YES debug_message=no [ 6.733708] BT: hash_size 0k, hash_expiation 0 sec, log_size 128kb [ 6.733708] sizeof hash_ip4p_node=44 id_struct=296 PATRICIA_MAXBITS=128 [ 6.733708] flow_struct=2064 packet_struct=1400 [ 6.733708] flow_tcp_struct=42 flow_udp_struct=27 int_one_line_struct=16 [ 6.733708] ndpi_ip_addr_t=16 ndpi_protocol=8 nf_ct_ext_ndpi=176 [ 6.733708] spinlock_t=4 [ 6.733708] NF_EXT_ID 7 [ 6.781030] xt_ndpi: MAX_PROTOCOLS 320 LAST_PROTOCOL 243 [ 6.787240] xt_ndpi: flow acctounting OFF [ 6.800275] xt_time: kernel timezone is -0000 [ 6.806176] usbcore: registered new interface driver ark3116 [ 6.812812] usbserial: USB Serial support registered for ark3116 [ 6.821496] usbcore: registered new interface driver bas_gigaset [ 6.828373] bas_gigaset: USB Driver for Gigaset 307x [ 6.835037] usbcore: registered new interface driver belkin_sa [ 6.841891] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 6.854078] usbcore: registered new interface driver cdc_mbim [ 6.888348] usbcore: registered new interface driver ch341 [ 6.894877] usbserial: USB Serial support registered for ch341-uart [ 6.903316] usbcore: registered new interface driver cp210x [ 6.909888] usbserial: USB Serial support registered for cp210x [ 6.917832] usbcore: registered new interface driver cypress_m8 [ 6.924726] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 6.932886] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 6.941234] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 6.953136] usbcore: registered new interface driver ftdi_sio [ 6.959760] usbserial: USB Serial support registered for FTDI USB Serial Device [ 6.969152] usbcore: registered new interface driver garmin_gps [ 6.976114] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 6.987687] usbcore: registered new interface driver keyspan [ 6.994312] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 7.004048] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 7.012431] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 7.020850] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 7.071592] usbcore: registered new interface driver mct_u232 [ 7.078313] usbserial: USB Serial support registered for MCT U232 [ 7.087164] usbcore: registered new interface driver mos7720 [ 7.093900] usbserial: USB Serial support registered for Moschip 2 port adapter [ 7.103832] usbcore: registered new interface driver mt7601u [ 7.115331] usbcore: registered new interface driver oti6858 [ 7.122002] usbserial: USB Serial support registered for oti6858 [ 7.130025] usbcore: registered new interface driver pl2303 [ 7.136684] usbserial: USB Serial support registered for pl2303 [ 7.159271] usbcore: registered new interface driver rtl8xxxu [ 7.178483] usbcore: registered new interface driver sierra [ 7.185030] usbserial: USB Serial support registered for Sierra USB modem [ 7.193972] usbcore: registered new interface driver ti_usb_3410_5052 [ 7.201471] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 7.210940] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 7.221383] usbcore: registered new interface driver usb_serial_simple [ 7.228983] usbserial: USB Serial support registered for carelink [ 7.236114] usbserial: USB Serial support registered for zio [ 7.242722] usbserial: USB Serial support registered for funsoft [ 7.249727] usbserial: USB Serial support registered for flashloader [ 7.257148] usbserial: USB Serial support registered for google [ 7.264048] usbserial: USB Serial support registered for libtransistor [ 7.271584] usbserial: USB Serial support registered for vivopay [ 7.278450] usbserial: USB Serial support registered for moto_modem [ 7.285655] usbserial: USB Serial support registered for motorola_tetra [ 7.293156] usbserial: USB Serial support registered for novatel_gps [ 7.300349] usbserial: USB Serial support registered for hp4x [ 7.306836] usbserial: USB Serial support registered for suunto [ 7.313541] usbserial: USB Serial support registered for siemens_mpi [ 7.329670] brcmfmac mmc1:0001:1: no of_node; not parsing pinctrl DT [ 7.329778] brcmfmac mmc1:0001:2: no of_node; not parsing pinctrl DT [ 7.334213] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.370090] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2 [ 7.383800] brcmfmac mmc1:0001:1: Falling back to user helper [ 9.071098] usb 1-1.2: new high-speed USB device number 5 using dwc_otg [ 9.201911] usb 1-1.2: New USB device found, idVendor=12d1, idProduct=1f01 [ 9.209556] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.217714] usb 1-1.2: Product: HUAWEI_MOBILE [ 9.222802] usb 1-1.2: Manufacturer: HUAWEI_MOBILE [ 9.228257] usb 1-1.2: SerialNumber: 0123456789ABCDEF [ 9.234312] usb 1-1.2: no of_node; not parsing pinctrl DT [ 9.234879] uas 1-1.2:1.0: no of_node; not parsing pinctrl DT [ 9.234928] usb-storage 1-1.2:1.0: no of_node; not parsing pinctrl DT [ 9.234951] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 9.242772] scsi host0: usb-storage 1-1.2:1.0 [ 9.500411] firmware brcm!brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt: firmware_loading_store: map pages failed [ 9.613517] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.638750] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 9.685225] brcmfmac mmc1:0001:3: no of_node; not parsing pinctrl DT [ 9.685465] usbcore: registered new interface driver brcmfmac [ 9.693695] usbcore: registered new interface driver ipw [ 9.700213] usbserial: USB Serial support registered for IPWireless converter [ 9.710122] usbcore: registered new interface driver option [ 9.716915] usbserial: USB Serial support registered for GSM modem (1-port) [ 9.726520] usbcore: registered new interface driver qcserial [ 9.733467] usbserial: USB Serial support registered for Qualcomm USB modem [ 9.757138] usbcore: registered new interface driver rt2800usb [ 9.777466] usbcore: registered new interface driver rtl8192cu [ 9.784599] kmodloader: done loading kernel modules from /etc/modules.d/* [ 9.804118] usb 1-1.2: USB disconnect, device number 5 [ 10.161099] usb 1-1.2: new high-speed USB device number 6 using dwc_otg [ 10.311716] usb 1-1.2: New USB device found, idVendor=12d1, idProduct=14dc [ 10.319602] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.327903] usb 1-1.2: Product: HUAWEI_MOBILE [ 10.333166] usb 1-1.2: Manufacturer: HUAWEI_MOBILE [ 10.339077] usb 1-1.2: no of_node; not parsing pinctrl DT [ 10.357780] cdc_ether 1-1.2:1.0: no of_node; not parsing pinctrl DT [ 10.366353] cdc_ether 1-1.2:1.0 eth1: register 'cdc_ether' at usb-3f980000.usb-1.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64 [ 10.379906] uas 1-1.2:1.2: no of_node; not parsing pinctrl DT [ 10.386824] usb-storage 1-1.2:1.2: no of_node; not parsing pinctrl DT [ 10.394237] usb-storage 1-1.2:1.2: USB Mass Storage device detected [ 10.401923] scsi host0: usb-storage 1-1.2:1.2 [ 11.231091] usb 1-1.1.3: new high-speed USB device number 7 using dwc_otg [ 11.381880] usb 1-1.1.3: New USB device found, idVendor=12d1, idProduct=1f01 [ 11.389864] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.398970] usb 1-1.1.3: Product: HUAWEI_MOBILE [ 11.404363] usb 1-1.1.3: Manufacturer: HUAWEI_MOBILE [ 11.410165] usb 1-1.1.3: SerialNumber: 0123456789ABCDEF [ 11.416449] usb 1-1.1.3: no of_node; not parsing pinctrl DT [ 11.423589] uas 1-1.1.3:1.0: no of_node; not parsing pinctrl DT [ 11.430481] usb-storage 1-1.1.3:1.0: no of_node; not parsing pinctrl DT [ 11.438206] usb-storage 1-1.1.3:1.0: USB Mass Storage device detected [ 11.445943] scsi 0:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2 [ 11.445958] scsi host1: usb-storage 1-1.1.3:1.0 [ 11.455986] sd 0:0:0:0: no of_node; not parsing pinctrl DT [ 11.469507] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 11.699379] usb 1-1.1.3: USB disconnect, device number 7 [ 12.101087] usb 1-1.1.3: new high-speed USB device number 8 using dwc_otg [ 12.241752] usb 1-1.1.3: New USB device found, idVendor=12d1, idProduct=14dc [ 12.249685] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.258729] usb 1-1.1.3: Product: HUAWEI_MOBILE [ 12.264054] usb 1-1.1.3: Manufacturer: HUAWEI_MOBILE [ 12.270054] usb 1-1.1.3: no of_node; not parsing pinctrl DT [ 12.278905] cdc_ether 1-1.1.3:1.0: no of_node; not parsing pinctrl DT [ 12.287825] cdc_ether 1-1.1.3:1.0 eth2: register 'cdc_ether' at usb-3f980000.usb-1.1.3, CDC Ethernet Device, 0c:5b:8f:27:9a:64 [ 12.301671] uas 1-1.1.3:1.2: no of_node; not parsing pinctrl DT [ 12.308656] usb-storage 1-1.1.3:1.2: no of_node; not parsing pinctrl DT [ 12.316444] usb-storage 1-1.1.3:1.2: USB Mass Storage device detected [ 12.325973] scsi host1: usb-storage 1-1.1.3:1.2 [ 13.351689] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2 [ 13.361711] sd 1:0:0:0: no of_node; not parsing pinctrl DT [ 13.369805] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 14.078604] 8021q: adding VLAN 0 to HW filter on device eth0 [ 14.085389] lan78xx 1-1.1.1:1.0 eth0: kevent 4 may have been dropped [ 14.102147] cdc_ether 1-1.1.3:1.0 eth2: kevent 12 may have been dropped [ 14.637410] EXT4-fs error (device mmcblk0p2): __ext4_new_inode:1120: comm sed: failed to insert inode 126: doubly allocated? [ 14.655073] EXT4-fs (mmcblk0p2): Remounting filesystem read-only [ 90.832484] cdc_ether 1-1.2:1.0 eth1: kevent 12 may have been dropped [ 90.840008] cdc_ether 1-1.2:1.0 eth1: kevent 11 may have been dropped [ 90.882295] ERROR::assign_and_init_hc:1391: assign_and_init_hc: Failed to allocate memory to handle non-dword aligned buffer case [ 90.882295] [ 91.512154] raspberrypi-firmware soc:firmware: Get Throttled mailbox call failed [ 252.954459] NETDEV WATCHDOG: eth1 (cdc_ether): transmit queue 0 timed out [ 252.962303] ------------[ cut here ]------------ [ 252.967862] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x16c/0x258 [ 252.977955] Modules linked in: rtl8192cu rtl8192c_common rtl_usb rt2800usb rt2800lib qcserial option ipw brcmfmac usb_wwan usb_serial_simple ti_usb_3410_5052 sierra rtlwifi rtl8xxxu rt2x00usb rt2x00lib pppoe ppp_async pl2303 oti6858 nf_nat_pptp nf_conntrack_pptp mt7601u mos7720 mmc_spi mct_u232 mac80211 keyspan iptable_nat ipt_REJECT ipt_MASQUERADE garmin_gps ftdi_sio ebtable_nat ebtable_filter ebtable_broute cypress_m8 cp210x ch341 cfg80211 cdc_mbim belkin_sa bas_gigaset ark3116 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_socket xt_recent xt_quota xt_pkttype xt_owner xt_ndpi xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_iface xt_hl xt_helper xt_hashlimit xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_condition xt_comment xt_addrtype xt_TRACE xt_TPROXY xt_TCPMSS [ 253.059735] xt_REDIRECT xt_LOG xt_IPMARK xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY xt_ACCOUNT visor usbserial usbhid usb_gigaset ts_fsm ts_bm sr9700 sierra_net ser_gigaset rtl8150 rndis_host r8712u r8152 qmi_wwan pppox ppp_generic pegasus of_mmc_spi nf_socket_ipv6 nf_socket_ipv4 nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda mcs7830 macvlan kaweth kalmia iptable_raw iptable_mangle [ 253.142087] iptable_filter ipt_ECN ipheth ip6table_raw ip_tables huawei_cdc_ncm hso hid_generic gigaset ezusb ethoc ebtables ebt_vlan ebt_stp ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_among ebt_802_3 dm9601 crc7 crc_itu_t crc_ccitt compat_xtables compat cdc_wdm cdc_subset cdc_ncm cdc_ether cdc_eem cdc_acm brcmutil ax88179_178a asix arptable_filter arpt_mangle arp_tables sch_cake sch_teql sch_sfq sch_red sch_prio sch_pie sch_multiq sch_mqprio sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte em_meta em_cmp cls_flower act_vlan act_simple act_police act_pedit act_ipt act_gact act_csum sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred snd_bcm2835 hid evdev i2c_gpio i2c_algo_bit i2c_dev i2c_core [ 253.224174] spi_ks8995 xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 isdn_bsdcomp dss1_divert isdn slhc ifb sit sctp libcrc32c tunnel4 ip_tunnel veth tun snd_rawmidi snd_seq_device snd_pcm_oss snd_pcm_dmaengine snd_pcm snd_timer snd_mixer_oss snd_hwdep snd_compress snd soundcore mISDN_dsp l1oip mISDN_core nls_utf8 [ 253.306434] sha256_generic seqiv jitterentropy_rng drbg md5 hmac ghash_generic gf128mul gcm ctr nls_iso8859_1 nls_cp437 xhci_plat_hcd xhci_hcd ehci_platform ehci_hcd gpio_button_hotplug ptp broadcom bcm_phy_lib pps_core [ 253.329529] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.115 #0 [ 253.336765] Hardware name: Raspberry Pi 3 Model B Plus Rev 1.3 (DT) [ 253.344169] task: ffffffc038ca8000 task.stack: ffffff8008828000 [ 253.351211] PC is at dev_watchdog+0x16c/0x258 [ 253.356627] LR is at dev_watchdog+0x16c/0x258 [ 253.362012] pc : [] lr : [] pstate: 60000145 [ 253.371433] sp : ffffff800801be20 [ 253.375719] x29: ffffff800801be20 x28: ffffff8008737008 [ 253.382018] x27: ffffff80087385a8 x26: ffffff8008755180 [ 253.388272] x25: 0000000000000100 x24: 0000000000000010 [ 253.394509] x23: 00000000ffffffff x22: 0000000000000003 [ 253.400710] x21: ffffff8008756000 x20: ffffffc03807b000 [ 253.406883] x19: 0000000000000000 x18: 9f59220ddfb253b9 [ 253.413039] x17: ffffff80085b2b44 x16: ffffff80085b2b44 [ 253.419173] x15: ffffff80085b2b44 x14: ffffff80085b2b44 [ 253.425264] x13: ffffff80085b2b44 x12: ffffff80085b2b44 [ 253.431311] x11: ffffffc038f8a230 x10: 0000000000000001 [ 253.437333] x9 : 0000000000000000 x8 : 0000000000000000 [ 253.443322] x7 : 0000000000000008 x6 : 00000000000002fe [ 253.449271] x5 : 0000000000000008 x4 : 0000000000000003 [ 253.455180] x3 : 0000000000000000 x2 : 0000000000000004 [ 253.461067] x1 : 0000000000000004 x0 : 000000000000003d [ 253.466928] Call trace: [ 253.469849] Exception stack(0xffffff800801bce0 to 0xffffff800801be20) [ 253.476891] bce0: 000000000000003d 0000000000000004 0000000000000004 0000000000000000 [ 253.485813] bd00: 0000000000000003 0000000000000008 00000000000002fe 0000000000000008 [ 253.494825] bd20: 0000000000000000 0000000000000000 0000000000000001 ffffffc038f8a230 [ 253.503963] bd40: ffffff80085b2b44 ffffff80085b2b44 ffffff80085b2b44 ffffff80085b2b44 [ 253.513216] bd60: ffffff80085b2b44 ffffff80085b2b44 9f59220ddfb253b9 0000000000000000 [ 253.522573] bd80: ffffffc03807b000 ffffff8008756000 0000000000000003 00000000ffffffff [ 253.532079] bda0: 0000000000000010 0000000000000100 ffffff8008755180 ffffff80087385a8 [ 253.541696] bdc0: ffffff8008737008 ffffff800801be20 ffffff80084701bc ffffff800801be20 [ 253.551485] bde0: ffffff80084701bc 0000000060000145 ffffff8000b48878 0000000000000000 [ 253.561424] be00: 0000007fffffffff 0000000000000200 ffffff800801be20 ffffff80084701bc [ 253.571474] [] dev_watchdog+0x16c/0x258 [ 253.578013] [] call_timer_fn.isra.27+0x24/0x78 [ 253.585146] [] run_timer_softirq+0x184/0x3a0 [ 253.592071] [] do_softirq+0x100/0x1fc [ 253.598539] [] irq_exit+0x80/0xd8 [ 253.604439] [] handle_domain_irq+0x88/0xb0 [ 253.611293] [] bcm2836_arm_irqchip_handle_irq+0xac/0xb8 [ 253.619105] Exception stack(0xffffff800882be30 to 0xffffff800882bf70) [ 253.626557] be20: 0000000000000000 0000000000000000 [ 253.636267] be40: 0000000000000001 0000000000000000 0000004031c87000 00ffffffffffffff [ 253.645960] be60: 0000000121759ccd 0000000000000000 0000000000000002 ffffff800882bef0 [ 253.655648] be80: 0000000000000700 0000000000000000 000000002e8680c7 00000000b7ff08d5 [ 253.665340] bea0: 000000005d96f680 fd84bc9182e94352 ffffff800816d1c8 0000007fbab674ac [ 253.675012] bec0: 9f59220ddfb253b9 ffffff8008758828 ffffff8008737008 ffffff8008758000 [ 253.684702] bee0: 0000000000000000 0000000000000000 ffffffc038ca8000 b22218080452ae90 [ 253.694425] bf00: d443f404cbc559e0 da95fc00dd9960c9 f20603003d01bbf0 ffffff800882bf70 [ 253.704261] bf20: ffffff800808475c ffffff800882bf70 ffffff8008084760 0000000000000145 [ 253.714204] bf40: b22218080452ae90 d443f404cbc559e0 ffffffffffffffff ffffff80080e16fc [ 253.724205] bf60: ffffff800882bf70 ffffff8008084760 [ 253.730185] [] el1_irq+0xb0/0x140 [ 253.736163] [] arch_cpu_idle+0x10/0x18 [ 253.742556] [] do_idle+0xec/0x1b8 [ 253.748476] [] cpu_startup_entry+0x20/0x28 [ 253.755164] [] secondary_start_kernel+0x17c/0x188 [ 253.762455] ---[ end trace c015cac59ac6bc86 ]--- [ 253.768193] ERROR::assign_and_init_hc:1391: assign_and_init_hc: Failed to allocate memory to handle non-dword aligned buffer case [ 253.768193] [ 253.784228] ERROR::assign_and_init_hc:1391: assign_and_init_hc: Failed to allocate memory to handle non-dword aligned buffer case [ 253.784228] [ 253.800186] ERROR::assign_and_init_hc:1391: assign_and_init_hc: Failed to allocate memory to handle non-dword aligned buffer case [ 253.800186] [ 253.816039] ERROR::assign_and_init_hc:1391: assign_and_init_hc: Failed to allocate memory to handle non-dword aligned buffer case [ 253.816039] [ 253.845472] ERROR::assign_and_init_hc:1391: assign_and_init_hc: Failed to allocate memory to handle non-dword aligned buffer case [ 253.845472]

Ysurac / openmptcprouter