Not show usb modem tape. 4G, 3G etc. Shutdown not available

Ysurac / openmptcprouter

OpenMPTCProuter is an open source solution to aggregate multiple internet connections using Multipath TCP (MPTCP) on OpenWrt

https://www.openmptcprouter.com/

GNU General Public License v3.0

1.73k stars 252 forks source link

Not show usb modem tape. 4G, 3G etc. Shutdown not available #907

Open sench4707 opened 4 years ago

sench4707 commented 4 years ago

Expected Behavior

Update to latest version v0.54.6. Again not show usb modem network tape. when using usb modem need to know what network tape is use modem for connection. In screenshot you can see that only signal level is shown.

Shutdown also not available via web.

Specifications

OpenMPTCProuter version: v0.54.6
OpenMPTCProuter platform: RPI4

RPI4

Ysurac commented 4 years ago

All informations are not always available without authentication for each protocol/API. What is the protocol used for your modem and what is the manufacturer ?

sench4707 commented 4 years ago

Modem manufacturer Huawei. Model E3372s. Mode HiLink. DHCP.

Olli69 commented 4 years ago

One vote for a shutdown function in the UI. I have RPi 4 in a streaming backpack and if you just pull off the power cable from a power bank, the memory card gets easily corrupted.

Ysurac commented 4 years ago

I will try to add both network info for Huawei and shutdown button in next release.

rubaz100 commented 4 years ago

Can you add support for the Huawei B528 (German: Vodafone Gigacube) too?

Thank you! <3

Ysurac commented 4 years ago

This will be for most available Huawei dongle

gnosoz commented 4 years ago

I am using 2 x TPLINK 4G routers as follows connected via LAN port.

Archer MR200
Archer MR600 For these 2 connections the router is unable to discover they are 3/4G router therefore threats them as DSL connections while a vodafone USB dongle is correctly identified as LTE.

Ysurac commented 4 years ago

TPLink routers should have an API too, but I don't own any TPLink router so I can't test and add the support for that.

gnosoz commented 4 years ago

I can send one to you together with an APU4C board which is what I am using

Ysurac commented 4 years ago

Thanks, my address is here: https://www.openmptcprouter.com/about But for now I think it's difficult: I have no idea if I will still receive parcel next week... We are confined in France due to Covid-19.

gnosoz commented 4 years ago

same here and hope you and your family are in good health. The TP-Link will arrive directly from amazon FR to the address advised whilst the (fully working openmptcprouter) apu board will be shipped from our company once situation returns to normal.

Ysurac commented 4 years ago

I live in countryside so not too much problems for now. I hope it's ok for you too ? ok thanks.