Closed Ysurac closed 3 years ago
@krissfr I tested, this seems to work for must part, so yes I will make the VPS script available for Ubuntu 20.04
@tentious Cameras are on the lan or on another network/cloud ?
@tentious Cameras are on the lan or on another network/cloud ?
Arlo cameras are cloud connected. So they upload to cloud and whatever device you use to view the cameras also connect to cloud. There is no direct connection to the camera on local LAN. I'm eventually planning to move to on-premise/local LAN cameras, as cloud connected cameras have more weird problems than the time and effort they save to make things easy.
@tentious do you have IPv6 enabled ? Else it's difficult for me to test, there is no demo available on arlo website.
IPv6 is disabled.
Understood that's it's a difficult one to test. It could actually be a problem with the IP cameras uploading video, not necessarily the playing/download of the video stream. I will test further from my phone connected via LTE vs local LAN to see if it's the upload or download.
I will test further from my phone connected via LTE vs local LAN to see if it's the upload or download.
So it's definitely upload from the camera to Netgear/Arlo cloud that isn't working. After enabling Shadowsocks again and viewing from my phone connected over LTE WAN, not local LAN, I'm still not able to view the camera. After disabling shadowsocks Arlo cameras work both from LAN and WAN.
Would OMR Bypass directly route/bypass Shadowsocks if configured? This might be a good workaround.
On my raspberry pi4 0.55 beta 7 is much more stable and better than last stable...
Hello,
I am on beta7. I tried to swap to another VPS but every time I select disable on the primary and save then the tick box is not save so both seem active.
Some logs if it can help (not sure why curl complains)
Mon Jun 8 18:06:20 2020 user.notice ModemManager: hotplug: add network interface tun0: event processed Mon Jun 8 18:06:20 2020 user.notice ModemManager: hotplug: event reported: action=add, name=tun0, subsystem=net Mon Jun 8 18:06:20 2020 user.notice ModemManager: hotplug: error: parent device sysfspath not found Mon Jun 8 18:06:21 2020 daemon.err glorytun[28959]: 51.178.141.35.65001: connected Mon Jun 8 18:06:21 2020 daemon.info glorytun[28959]: STARTED tun0 Mon Jun 8 18:06:22 2020 daemon.err /usr/bin/ss-local[2879]: getpeername: Socket not connected Mon Jun 8 18:06:23 2020 user.notice omr-bypass: Starting OMR-ByPass... Mon Jun 8 18:06:23 2020 user.notice OMR-VPS: Get config from VPS... Mon Jun 8 18:06:23 2020 user.notice OMR-VPS: Glorytun restart... Mon Jun 8 18:06:23 2020 daemon.notice netifd: Network device 'tun0' link is down Mon Jun 8 18:06:23 2020 daemon.notice netifd: Interface 'omrvpn' has link connectivity loss Mon Jun 8 18:06:23 2020 daemon.notice netifd: Interface 'omrvpn' is now down Mon Jun 8 18:06:23 2020 daemon.info glorytun[28959]: STOPPED tun0 Mon Jun 8 18:06:23 2020 daemon.err glorytun: Key empty Mon Jun 8 18:06:23 2020 daemon.notice netifd: Interface 'omrvpn' is disabled Mon Jun 8 18:06:23 2020 user.notice ModemManager: hotplug: remove network interface tun0: event processed Mon Jun 8 18:06:23 2020 user.notice ModemManager: hotplug: event reported: action=remove, name=tun0, subsystem=net Mon Jun 8 18:06:23 2020 user.notice OMR-VPS: Restart glorytun... Mon Jun 8 18:06:23 2020 daemon.err glorytun: Key empty Mon Jun 8 18:06:24 2020 user.notice omr-bypass: Restart dnsmasq... Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[25810]: exiting on receipt of SIGTERM Mon Jun 8 18:06:24 2020 user.notice omr-bypass: OMR-ByPass is running Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: started, version 2.81 cachesize 150 Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: DNS service limited to local subnets Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC no-ID loop-detect inotify dumpfile Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain test Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain onion Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain localhost Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain local Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain invalid Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain bind Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain use-application-dns.net Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using nameserver 127.0.0.1#5353 Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: using only locally-known addresses for domain lan Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: read /etc/hosts - 4 addresses Mon Jun 8 18:06:24 2020 daemon.info dnsmasq[30612]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses Mon Jun 8 18:06:25 2020 daemon.err omr-tracker-server[11057]: curl: option --max-time: expected a proper numerical parameter Mon Jun 8 18:06:25 2020 daemon.err omr-tracker-server[11057]: curl: try 'curl --help' for more information Mon Jun 8 18:06:26 2020 user.notice Shadowsocks: Rules UP Mon Jun 8 18:06:26 2020 user.notice Shadowsocks: Reload omr-bypass rules Mon Jun 8 18:06:26 2020 user.notice omr-bypass: Starting OMR-ByPass... Mon Jun 8 18:06:26 2020 daemon.err /usr/bin/ss-redir[2880]: remote recv: Connection refused Mon Jun 8 18:06:26 2020 user.notice OMR-VPS: Can't get token, try later Mon Jun 8 18:06:26 2020 user.notice mptcp: Reloading mptcp config due to ifup of omrvpn (tun0) Mon Jun 8 18:06:26 2020 user.notice omr-bypass: Reload dnsmasq... Mon Jun 8 18:06:26 2020 daemon.err omr-tracker-server[11057]: curl: option --max-time: expected a proper numerical parameter Mon Jun 8 18:06:26 2020 daemon.err omr-tracker-server[11057]: curl: try 'curl --help' for more information Mon Jun 8 18:06:26 2020 daemon.info dnsmasq[30612]: read /etc/hosts - 4 addresses Mon Jun 8 18:06:26 2020 daemon.info dnsmasq[30612]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses Mon Jun 8 18:06:26 2020 user.notice omr-bypass: OMR-ByPass is running Mon Jun 8 18:06:27 2020 daemon.err /usr/bin/ss-local[2879]: getpeername: Socket not connected Mon Jun 8 18:06:27 2020 daemon.info omr-tracker-ss: Shadowsocks is down (can't contact via http 1.1.1.1, 1.0.0.1, 212.27.48.10, 104.16.1.1, 103.224.182.242, 198.27.92.1, 88.191.250.176, 151.101.129.164, 198.11.132.250) Mon Jun 8 18:06:27 2020 user.notice Shadowsocks: Rules DOWN Mon Jun 8 18:06:27 2020 daemon.err omr-tracker-server[11057]: curl: option --max-time: expected a proper numerical parameter Mon Jun 8 18:06:27 2020 daemon.err omr-tracker-server[11057]: curl: try 'curl --help' for more information Mon Jun 8 18:06:28 2020 daemon.err omr-tracker-server[11057]: curl: option --max-time: expected a proper numerical parameter Mon Jun 8 18:06:28 2020 daemon.err omr-tracker-server[11057]: curl: try 'curl --help' for more information Mon Jun 8 18:06:28 2020 user.notice post-tracking-post-tracking: Get status and settings for wan3... Done
@xabix This will be fixed in next beta
Hello Ysurac,
Why when I set only DL SQM on my ADSL in OMR Assistant, I get 0 in SQM QoS. Could there be a bug?
when I come back to Assistance, it shows 0 so like it couldn't be saved.
Merci
This will be fixed in next beta.
Not sure why but beta 8 is not working.
I did clear cache on my Chrome too.
I can connect in ssh and all my wan interfaces are up but I get:
I have rolled back to beta 7
It's what I said in first message, beta 8 & 9 are not working. I hope beta 10 will work.
It's what I said in first message, beta 8 & 9 are not working. I hope beta 10 will work.
Ok I didn't see that when I tried! Sorry didn't double check when posting :) Will try beta 10 then
In the new OMR Bypass interface, await fs.lines('/proc/net/xt_ndpi/proto')
returns a truncated output, only the first 80 lines or so are returned.
cat /proc/net/xt_ndpi/proto | wc -l
gives 321 lines
fs.read_direct
doesn't have this size limitation
The sort is actually case sensitive Array.from(new Set(name)).sort()
.
You can do a case insensitive sort with .sort(function (a, b) { return a.toLowerCase().localeCompare(b.toLowerCase()); })
Thanks, I will fix that for next beta.
beta11 x86_64 gives me error in repos:
root@OpenMPTCProuter:~# opkg update Downloading http://packages.openmptcprouter.com/0.5511/x86_64/luci/Packages.gz *** Failed to download the package list from http://packages.openmptcprouter.com/0.5511/x86_64/luci/Packages.gz
Downloading http://packages.openmptcprouter.com/0.5511/x86_64/packages/Packages.gz *** Failed to download the package list from http://packages.openmptcprouter.com/0.5511/x86_64/packages/Packages.gz
Downloading http://packages.openmptcprouter.com/0.5511/x86_64/base/Packages.gz *** Failed to download the package list from http://packages.openmptcprouter.com/0.5511/x86_64/base/Packages.gz
Downloading http://packages.openmptcprouter.com/0.5511/x86_64/routing/Packages.gz *** Failed to download the package list from http://packages.openmptcprouter.com/0.5511/x86_64/routing/Packages.gz
Downloading http://packages.openmptcprouter.com/0.5511/x86_64/telephony/Packages.gz *** Failed to download the package list from http://packages.openmptcprouter.com/0.5511/x86_64/telephony/Packages.gz
Downloading http://openmptcprouter.com:80/release/5.4/targets/x86/64/packages/Packages.gz Updated list of available packages in /var/opkg-lists/openmptcprouter_core Downloading http://openmptcprouter.com:80/release/5.4/targets/x86/64/packages/Packages.sig Signature check passed. Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/base/Packages.gz Updated list of available packages in /var/opkg-lists/openmptcprouter_base Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/base/Packages.sig Signature check passed. Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/luci/Packages.gz Updated list of available packages in /var/opkg-lists/openmptcprouter_luci Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/luci/Packages.sig Signature check passed. Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/openmptcprouter/Packages.gz Updated list of available packages in /var/opkg-lists/openmptcprouter_openmptcprouter Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/openmptcprouter/Packages.sig Signature check passed. Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/packages/Packages.gz Updated list of available packages in /var/opkg-lists/openmptcprouter_packages Downloading http://openmptcprouter.com:80/release/5.4/packages/x86_64/packages/Packages.sig Signature check passed. Collected errors:
on Banana Pi R2 opkg update (same beta11) gives me similar result
I added a temporary link for the beta, this should work now.
now it's working; thank you
Updates not working in beta13 @Ysurac can you please fix it. Thank you
it's working now
False positive about Multipath warning on Wan is gone for me. Thanks
Can someone give me a hint how to upgrade openmptcp for banana pi r2. Currently i'm running beta14 I would like to upgrade to beta15.
wait, it's not yet released ;)
Now beta 15 is compiled, so to update: https://github.com/Ysurac/openmptcprouter/wiki/Router-install#update
Moved this comment from my other post to here as I think it is more appropriate ...
Four days ago I've decided to reinstall my fastest VPS with latest stable OMR version, making sure fail2ban is uninstalled, but I was constantly getting VPN tunnel DOWN whenever some increased network activity occurred (ie. gaming) which was kind of funny, because when I switched to another VPS everything was working fine without VPN tunnel going down on the same OMR version ... Then I've decided to try OMR latest beta (14) and VPN tunnel DOWN hasn't occurred yet, so whatever you changed seems to be working better ... Will update to beta 15 today and report back ...
Modemmanager interfaces are not working anymore on beta15. After a new interface is created, it works for a couple of minutes then this errors shows up
Powerstate goes to disabled and the interface is unusable
Status | lock: sim-pin2 | unlock retries: sim-pin (3), sim-pin2 (3), sim-puk (10), sim-puk2 (10) | state: disabled | power state: on | signal quality: 0% (cached)
There is also a problem on setting frequency and cpu governor from the web gui. No matter what you type in, config seems to be not saved as it stays at 1,5 ghz min and max and on performance governor. I had to put the configuration in rc.local
For modemmanager issue, can you check what you have in State->System log when this happen ? For the frequency and scaling governor, it's forced on RPI to solve CPU speed issue but I will make it an other way or remove settings on interface for RPI.
For modemmanager issue, can you check what you have in State->System log when this happen ?
I managed to understand that once it reloads the network, the interface become unavailable. I have configured a modemmanager wan named WAN_Very, then a macvlan on the main eth, and then the first one showed the error. I am attaching the full log for your reference, do not pay attention to the timestamps, ntp kicked in during the configuration and it screwed them all.
For the frequency and scaling governor, it's forced on RPI to solve CPU speed issue but I will make it an other way or remove settings on interface for RPI.
I understand, but even at the lowest frequency the rpi4 is totally capable of managing the full stack with less then 10% CPU usage. Just as suggestion, maybe force it to 1GHz or 750Mhz could be enough. Personally, I have not seen any tangible benefits with the cpu at full throttle :)
ok thanks, this will be fixed in next beta.
OMR-Bypass Protocol/Services list is bugged (beta15)
Thanks, this will also be fixed in next beta.
The output of read_direct is directly the whole file (string). So you forgot to add something like .split("\n")
Hello,
Since the last beta version, the ports are no longer transmitted to me. When I try to access a service, for example my nas which is on IP:8082, nothing happens anymore. Do you know where the problem comes from? Thank you
Hello,
Going through the OpenVPN mode, it works, but the problem occurs when using Glorytun.
I'm not able to reproduce this issue. Can you check on the VPS, in /etc/shorewall/rules
that the redirect rule is available and in /etc/shorewall/params.vpn
the value of OMR_ADDR
when the VPN is not OpenVPN ? and can you also check in /var/log/daemon.log
if there is no error when you change VPN ?
I just switched back to Glorytun, and rebooted the VPS and the router. It's all back on, I don't know what happened. If it happens again, I'll check the logs and send them to you. Sorry for the false alarm
v0.55beta17 with SQM and piece_of_cake.qos enabled on each WAN, should there be any issues ? i also had DNS going thru pihole via gt-udp-tun0 10.255.254.1.
shadowsocks was tunneling for a little bit, but eventually reverts to a single WAN ip as master, and nothing is really in logs or tracker saying the state changed.
vps tested was OVH Canada region. also was using omr-bypass for some Apple update IP's since they block OVH ( probably due to abuse at some point from other bad customer)
i reverted to stable v0.54.7 r0+12509-04a21c26a0 with SQM enabled on each WAN with piece of cake, and it seems to have some improvement over default . also changed VPS to Luna Node, and it stable now.
used latest debian10-x86_64.sh for all VPS installs
@user747 what problem do you have ? I don't really understand.
hello
I can't upgrade the vps from beta 16 to 17 fatal: destination path 'shadowsocks-libev' already exists and is not an empty directory.
thx
Strange, a failed previous install ? You can run the script again, this should work.
No failed install
Working:)
testing v0.55beta18
is this much log output normal, when disabling vpn (in this example, glorytun tcp) ? this is on v0.55beta18 r0+13893-65e9de3c33 brcm2711
changed default vpn to to 'None' then save and apply. i'm not really sure what 'Can't find Shadowsocks, restart it...' message means.
The Can't find Shadowsocks, restart it...
means shadowsocks crashed or is not running.
It's working or not ?
The
Can't find Shadowsocks, restart it...
means shadowsocks crashed or is not running. It's working or not ?
working.
Mon Jul 27 08:50:51 2020 daemon.info omr-tracker-ss: Shadowsocks is up (can contact via http 103.224.182.242)
@Ysurac another one but might just be a reminder. have not noticed any impact. could be more on OpenWRT side.
Mon Jul 27 09:04:47 2020 daemon.err uhttpd[3467]: luci.util.pcdata() has been replaced by luci.xml.pcdata() - Please update your code.
It's solved in the new beta 19.
i have this issue when upgrading my vps to beta 18 =>19
Install kernel linux-image-5.4.52-mptcp_1.11+206826e if kernel install fail run: dpkg --remove --force-remove-reinstreq linux-image-5.4.52-mptcp (Reading database ... 94799 files and directories currently installed.) Preparing to unpack .../linux-image-5.4.52-mptcp_1.11+206826e_amd64.deb ... Ok, aborting, since modules for this image already exist. dpkg: error processing archive /tmp/linux-image-5.4.52-mptcp_1.11+206826e_amd64.deb (--install): new linux-image-5.4.52-mptcp package pre-installation script subprocess returned error exit status 1 Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 5.4.52-mptcp /boot/vmlinuz-5.4.52-mptcp run-parts: executing /etc/kernel/postrm.d/zz-update-grub 5.4.52-mptcp /boot/vmlinuz-5.4.52-mptcp Errors were encountered while processing: /tmp/linux-image-5.4.52-mptcp_1.11+206826e_amd64.deb `
solved
dpkg --remove --force-remove-reinstreq linux-image-5.4.52-mptcp
This issue is dedicated to OpenMPTCProuter v0.55.
For now nothing is tagged, it's only available as snapshot and not yet fully tested.
New features:
Nothing is tested yet.
Previous Beta
**Beta1** Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Multi VPS doesn't work * Rights error in Network->Firewall (solved in latest OpenWrt luci update) * Multi users doesn't work * OMR-ByPass doesn't work **Beta2** Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users * OMR-ByPass problem with destination port bypass * Nginx-HA interface not working **Beta3** (2020/05/06) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users **Beta4** (2020/05/15) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users * BPI-R2 is slow (I'm testing patches to fix that) * WRT3200ACM/WRT32X doesn't compile (fixed) **Beta5** (2020/05/21) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 is slow (I need to make more tests) * No network on RPI3 image (fixed for next beta) * IPv6 issue (will be fixed in next beta) * DSCP issue (fixed for next beta) **Beta6** (2020/05/27) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 is slow (I need to make more tests) * Only one IPv6 ULA/Prefix can be used * Issue with VPNs (speed for glorytun TCP, other doesn't run) (Fixed for next release) **Beta7** (2020/05/31) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 is slow (not yet tested with this kernel) * Issue if only one interface is available in balancing mode (fixed for next release) **Beta8** (2020/06/10) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing (some patches are applied in 5.4.45 kernel that is now used) * After wizard config keys are often downloaded, this need some times or to apply wizard again * flooding log with route error A new beta is compiling (2020/06/10), beta9 will fix routes and keys issues. **Beta9** (2020/06/10) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing (some patches are applied in 5.4.45 kernel that is now used) * Nothing work, OMR packages not compiled Beta10 is compiling (2020/06/10), I forgot to update OpenWrt in previous beta... (and nothing work in previous beta) **Beta10** (2020/06/11) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing (some patches are applied in 5.4.45 kernel that is now used) * Issue in multipath setting in Network->Interfaces * Opening port when VPN is not glorytun TCP doesn't work **Beta11** (2020/06/12) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing (some patches are applied in 5.4.45 kernel that is now used) * False report of "Multipath seems to be blocked on the connection" on many connections **Beta12** (2020/06/27) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing * MPTCP over VPN not working (fixed for next beta) * Check for Shadowsocks rules not working (fixed for next beta) * OMR-ByPass not working (working on this...) CircleCI is compiling Beta 13 **Beta13** (2020/06/29) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing * Chinese not available * OMR-Bypass doesn't work if not default public IP is used * log is full of a dirty IPv6 error **Beta14** (2020/06/30) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing * DSVPN doesn't work in load balancing * Previous routes not deleted when changing mode **Beta15** (2020/07/04) Images: https://www.openmptcprouter.com/release/develop/5.4/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing * vnstat display error (fixed for next beta) * omr-bypass protocol display error (fixed for next beta) * modem-manager/qmi device problem (fixed for next beta) * shadowsocks-libev interfaces rules add/edit (fixed for next beta) * pi-hole, other DNS removed (fixed for next beta) **Beta16** (2020/07/12) Images: https://download.openmptcprouter.com/release/v0.55beta16/ (moved to a new server) Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing * Not working on WRT32X/WRT3200ACM (fixed for next beta) **Beta17** (2020/07/16) Images: https://download.openmptcprouter.com/release/v0.55beta17/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing * MLVPN is not working * Problems with multi IP on VPS **Beta18** (2020/07/23) Images: https://download.openmptcprouter.com/release/v0.55beta18/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed for now) * BPI-R2 need testing **Beta19** (2020/07/30) Images: https://download.openmptcprouter.com/release/v0.55beta19/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed) **Release Candidate 1** (2020/08/04) Images: https://download.openmptcprouter.com/release/v0.55rc1/ Latest VPS script required: ```wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh``` Known issues: * Argon theme doesn't work well with multi users (this will not be fixed) * BPI-R2 image is not build * VPN traffic is tx+tx instead of tx+rx * RPI still give "Ring expansion failed" (workaround in next RC)Release Candidate 2 (2020/08/07) Images: https://download.openmptcprouter.com/release/v0.55rc2/ Latest VPS script required:
wget -O - http://www.openmptcprouter.com/server-test/debian10-x86_64.sh | sh
Known issues: