This is an AEM Commerce connector for Magento and GraphQL, that provides some integration of Magento products and categories in the AEM Commerce console, and some authoring features like product and category pickers.
Attention: Projects must use AEM Commerce Add-On for AEM 6.5 instead of the connector unless they use Magento 2.3.5 or earlier or CIF Core Components up to version 1.9.0. We strongly recommend to update existing projects to the AEM Commerce Add-on. See AEM 6.5 Content and Commerce documentation for usage instructions, getting started and development guides.
This project should only be used for AEM 6.4/6.5 projects with Magento up to version 2.4.2 only and works with AEM quickstart. It is compatible with CIF Core Components up to version 1.9.0. For a compatibility overview see versions.
It is also not intended to be used for AEM as a Cloud Service or with the AEM Cloud SDK. For using CIF on AEM as a Cloud Service see AEM Content and Commerce as a Cloud Service documentation.
This connector only provides authoring features, this is not meant to be used to develop frontend components. To develop AEM frontend components, refer to the AEM CIF Core Components project.
For most projects, a migration from this CIF Connector to the new AEM Commerce Add-On for AEM 6.5 is straight forward as the AEM Commerce Add-On is a full replacement of the CIF Connector. Uninstall the CIF Connector package and replace with the AEM Commerce Add-On package will be the only migration step for most of the projects. Make sure the OSGI configuration for the CIF GraphQL client and the CIF Cloud Services configuration stay in place.
If your project uses an older version of the CIF Connector and CIF Core Components, it is recommended to upgrade first to CIF Core Components 1.8.0 or later.
The main parts of the project are:
For local development and on-prem self-hosted customer deployments you can install all the modules of the connector and also its required dependencies with the all content package.
For AEM AMS customers the CIF Connector is installed like other AEM Feature Packs as it can not be deployed via Cloud Manager, please contact the CSE.
If you want to use the latest released version, just download it with the Maven Central link located at the top of this README and install it in your running AEM instance. You can also install the latest all
content package with mvn clean install -PautoInstallAll
.
If you want to build all the modules yourself and get all the latest (yet) unreleased changes, check the building and installing from source section below.
While the Connector can be installed via source as mentioned above, you may want to just include it as a dependency in your own Maven project. If doing so, and using the Filevault Package Maven Plugin, make sure to add a configuration to allow for indices as this project makes use of them:
allowIndexDefinitions=true
Starting with version 0.6.0
, all connector artifacts will be released with the same version number (reactor release).
For previous versions, we only provide the version requirements of the all
package. If you need to check the versions of other modules, simply checkout the corresponding cif-connector-all-x.y.z
tag and check the versions of other modules in the corresponding POM files or in the POM of the all
project.
CIF Connector | AEM 6.4 | AEM 6.5 | Magento | Java |
---|---|---|---|---|
1.8.1 | 6.4.4.0 | 6.5.0 | 2.4.0 | 1.8 |
1.3.0 | 6.4.4.0 | 6.5.0 | 2.3.4 & 2.3.5 | 1.8 |
0.8.1 | 6.4.4.0 | 6.5.0 | 2.3.2 & 2.3.3 | 1.8 |
For a list of requirements for previous versions, see Historical System Requirements.
The CIF Magento GraphQL AEM commerce connector has to be configured to access your Magento instance and bind the catalog data. Follow the steps below to configure the bundle:
Configure the generic GraphQL instance
CIF GraphQL Client Configuration Factory
default
service identifier or set something custom. Make sure to use the same value in step 2) below.GraphQL Service URL
enter the URL of your Magento GraphQL endpoint (usually https://hostname/graphql
)Default HTTP method
you can define whether the underlying HTTP client will send GET or POST requests. Starting with version 2.3.2, Magento supports and can cache some GraphQL queries when using GET.Configuration of the connector
CIF Catalog Magento GraphQL Configuration Factory
Magento GraphQL Service Identifier
enter the ID of the GraphQL client you already configured (see "pre-requisites")Create a cloud service configuration for Magento
Commerce provider
choose magento-graphql
Root category id
enter the ID of the Magento root category you want to define as the rootMagento store view
enter the code of the Magento store view that you want to useCatalog identifier
select the ID of the connector instance you created in the previous stepGraphql client
select the GraphQL client you created at step 1Binding of product catalog to AEM resource tree
Context-Aware Configuration
select the configuration you created in step 3AEM content editor product drag & drop
The project also provides product and category pickers to be used in any component dialog to select products or categories.
To use the product picker a developer has to add /libs/commerce/gui/components/common/cifproductfield
to a component dialog. For example use the following for the cq:dialog
:
<product jcr:primaryType="nt:unstructured" fieldLabel="Product" name="./product" sling:resourceType="commerce/gui/components/common/cifproductfield"/>
The product field allows to navigation to the product a user want to select via the different views. A user also can use the integrated search to find a product. By default the product field will return the ID of the product, but this can be configured using the selectionId
attribute.
The product picker field supports the following optional properties:
rootPath
- configure the root path of the virtual catalog data tree to be used (default = /var/commerce/products
)multiple
(true, false) - allows to select one or multiple products (default = false)emptyText
- to configure the empty text value of the picker fieldselectionId
(id, sku, slug, path, combinedSku) - allows to choose the product attribute to be returned by the picker (default = id). Using sku
returns the sku of the selected product, while using combinedSku
returns a string like base#variant
with the skus of the base product and the selected variant, or a single sku if a base product is selected.filter
(folderOrProduct, folderOrProductOrVariant) - filters the content to be rendered by the picker while navigating the product tree. folderOrProduct
- renders folders and products. folderOrProductOrVariant
- renders folders, product and product variants. If a product or product variant is rendered it becomes also selectable in the picker. (default = folderOrProduct
)The cifproductfield
component requires the cif.shell.picker
clientlib. To add a clientlib to a dialog, you can use the extraClientlibs
property. See also Customizing Dialog Fields
.
The connector includes a Sling post-processor that makes it possible to DnD a Product on a component, and configure the behavior of the DnD functionality. For example, you can refer to the cq:dropTarget
configuration of the productcarousel
and productteaser
components in the AEM CIF Core Components. The following parameters can be configured:
selectionId
(id, sku, slug, path) - similar to the product picker, see above. Note that the AEM Assets panel does not currently permit to select product variants, so the combinedSku
selection of the product picker is not supported by DnD.multiple
(true, false) - when true, DnDropping a product adds the value to the (array) JCR property so it's possible to select multiple products by DnD. When false, the property value is replaced so a single product can be DnDropped.The category picker (provided by /libs/commerce/gui/components/common/cifcategoryfield
) can be used in a component dialog as well. The following snippet can be used in a cq:dialog
configuration:
<category jcr:primaryType="nt:unstructured" fieldLabel="Category" name="./category" sling:resourceType="commerce/gui/components/common/cifcategoryfield"/>
The category picker field supports the following optional properties:
rootPath
- configure the root path of the virtual catalog data tree to be used (default = /var/commerce/products
)multiple
(true, false) - allows to select one or multiple categories (default = false)emptyText
- to configure the empty text value of the picker fieldselectionId
(id, path, idAndUrlPath) - allows to choose the category attribute to be returned by the picker (default = id). The idAndUrlPath
is a special option that will store the category id
and Magento's url_path
separated by a |
character like for example 1|men/tops
.The cifcategoryfield
component requires the cif.shell.picker
clientlib. To add a clientlib to a dialog, you can use the extraClientlibs
property. See also Customizing Dialog Fields
.
The project provides a sample scaffolding that only displays the basic information about a product. To link this scaffolding to your catalog root you have to do the following steps:
/apps/commerce/scaffolding/product
cq:targetPath
property to point to the root of your catalogTo see the properties page go to the products console (in Commerce --> Products) and select a cloud product. The Properties
action should be available and it should open the properties page when clicked.
If you build and install each module manually, the magento-graphql and graphql-client bundles have to be installed in your AEM instance. You MUST also configure an instance of the GraphQL client, see the instructions on the corresponding repository to setup the client.
To build all the modules run in the project root directory the following command with Maven 3:
mvn clean install
If you have a running AEM instance, you can also build and deploy all sub-projects into AEM with
mvn clean install -PautoInstall
This installs everything by default to localhost:4502
without any context path. You can also configure the install location with the following maven properties:
aem.host
: the name of the AEM instanceaem.port
: the port number of the AEM instanceaem.contextPath
: the context path of your AEM instance (if not /
)You can find the code formatting rules in /parent
. The code formatting is automatically checked for each build. To automatically format your code, please run:
mvn clean install -Pformat-code
For formatting JavaScript and CSS we use prettier. The formatting is automatically checked when running npm test
in the content/cif-connector/tests
folder. To automatically format your code, please run the following command in content/cif-connector/tests
:
npm run prettier:fix
Integration tests are located in it/http
and rely on additional test content from the test content package in it/content
. Instead of communicating directly with a commerce backend, the integration tests use the mock server in it/mock-server
.
To run the integration tests, first install the connector and the test content package. Then execute the following command and point to your running AEM author instance:
mvn clean verify -Ptest-all -Dsling.it.instance.url.1=http://localhost:4502 -Dsling.it.instance.runmode.1=author -Dsling.it.instances=1
The client-side JavaScript code of the connector is covered using Mocha unit tests executed with Karma. Please make sure that for every contribution new client-side code is covered by tests and that all tests pass.
cd content/cif-connector/tests
npm install
npm test
Karma will test with Chrome and Firefox. Make sure you have both browsers installed.
Releases are triggered by manually running mvn release:prepare release:clean
on the master
branch in the top-level folder of this repository. Once you choose the release and the next snapshot versions, this commits the change along with a release git tag like for example cif-connector-reactor-x.y.z
. Note that the commits are not automatically pushed to the git repository, so you have some time to check your changes and then manually push them. The push then triggers a dedicated CircleCI
build that performs the deployment of all the artifacts to Maven Central.
Note that the skip-it
property ensures that the integration tests sub-modules are not released.
Important: starting with version 0.6.0
, we changed the release strategy to a "reactor" release when all the artifacts are released with the same version. This makes it easier to perform releases and simplifies versioning.
Contributions are welcomed! Read the Contributing Guide for more information.
This project is licensed under the Apache V2 License. See LICENSE for more information.