search

almeyras / IP-over-LoRa

Bash and Python scripts to get IP over LoRa working on Raspberry Pi using a variety of EBYTE chips and programs (tncattach, kissattach, slattach, pppd...).
11 stars 2 forks source link

E22 Configuration script(s) #1

Open Dukat-Gul opened 3 years ago

Dukat-Gul commented 3 years ago

Heya, saw the very cool ascii art demonstration of the ip over lora on the waveshare lora hats.

Just been tinkering with mine, and Ive stumbled. Just wondering if you ever managed to script up the E22 configuration lines?

Refer to the user manual of your precise module for detailed information.

SNIP

Fully commented configuration scripts. In order to the modules to communicate in the same network, these scripts have to be configured with similar parameters:

E22 TBD

Thanks in advance.

almeyras commented 3 years ago

Hello! I used this app to configure the E22: RF_Setting(E22-E90(SL))+V2.0.zip https://www.ebyte.com/en/pdf-down.aspx?id=1742

But it is also possible to do manually via UART. You have to set M0 and M1 in a certain way, and then send the configuration frame according to the parameters in the manual. I can’t remember, but I think it never worked for me.

El 30 abr 2021, a las 9:10, Dukat-Gul @.***> escribió:

Refer to the user manual of your precise module for detailed information. SNIP

Fully commented configuration scripts. In order to the modules to communicate in the same network, these scripts have to be configured with similar parameters: