Ducted Heating with Add on Cooling

andrewleech / ha_magiqtouch

Home Assistant (HACS) integration to control Seeley MagiQtouch heating and cooling units.

MIT License

24 stars 6 forks source link

Ducted Heating with Add on Cooling #18

Open slothdady opened 10 months ago

slothdady commented 10 months ago

Hi Everyone, I have a MagiqTouch with ducted heating which works great, thanks heaps for making the add on. But I also have add-on cooling that that is also controlled by the MagiqTouch which doesn't seem to report into home assistant. (https://www.seeleyinternational.com/products/combined/ducted-gas-heating-and-add-on-cooling/)

Would anyone know if support has been added into this add-on? If not, are there logs I can attach that would assist in getting the add-on cooling added?

thanks

andrewleech commented 9 months ago

I don't know of anyone using add-on cooling with this module, I personally only have evap cooling - no heating. Logs of raw settings data can be captured by turning on debug in https://github.com/andrewleech/ha_magiqtouch/issues/16#issuecomment-1558259349 Then the home assistant system logs will have lines of json data in them for the settings whenever anything is changed.

I can't commit to having any time to spend on this myself though, don't have much time outside work lately.

ibwoo commented 9 months ago

I have ducted heating with the add on cooling, would be interested to hear if anybody gets this working.

DeltaTangoLima commented 7 months ago

I have both heating and cooling working with this HA plugin (screenshot below). My setup is Braemar ducted heating unit, with a Braemar evap unit daisy-chained through the ducted heater. The MagiQtouch panel is connected to the heater, and can control both units.

This plugin (until last week) was happily controlling both as a single climate entity in HA. I could set my MagiQtouch climate entity to heat, cool, recirc fan (uses ducted heater fan), or fresh fan (uses evap fan).

As I said, this was all fine until about a week ago. Now the plugin isn't able to change settings for either appliance through HA. BUT, it does reflect changes to settings made at the panel or in the MagiQtouch app. Issue #19 has been opened for that problem.