Closed mghie closed 1 year ago
Memory usage change @ 72462ca2661ef5667fb2482a0b2c48b278c5333f
Board | flash | % | RAM for global variables | % |
---|---|---|---|---|
arduino:avr:leonardo | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:avr:mega | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:avr:nano | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:megaavr:nona4809 | :small_red_triangle: 0 - +56 | 0.0 - +0.11 | 0 - 0 | 0.0 - 0.0 |
arduino:megaavr:uno2018 | :small_red_triangle: 0 - +56 | 0.0 - +0.12 | 0 - 0 | 0.0 - 0.0 |
arduino:sam:arduino_due_x_dbg | 0 - 0 | 0.0 - 0.0 | N/A | N/A |
arduino:samd:arduino_zero_edbg | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkr1000 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrfox1200 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrgsm1400 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrnb1500 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrvidor4000 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwan1300 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwan1310 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwifi1010 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrzero | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:nano_33_iot | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
The example program WebClient does not work on the Arduino Nano Every when DHCP is not available or commented out - the versions of Ethernet::begin() using a static IP address fail. I tested the example on Uno, Mega2560 and Micro, it works on all of them using either DHCP or static IP.
This modifies the begin() method so that it uses IPAddress::raw_address() instead of platform conditional code in the same way the DHCP version of begin() does. With this change static addresses work on the Nano Every too.