Open astir13 opened 5 years ago
https://github.com/astir13/SoftRF_standalone/commit/3deafedd0b14db367dfdf887e473f98229e6975c < screenshot of WebUI status page > (required)
Mode 0 Protocol 0 Band 1 Aircraft type 1 Alarm trigger 1 Tx Power 0 Volume 1 LED pointer 0 Bluetooth 0 NMEA GNSS false NMEA Private true NMEA Legacy true NMEA Sensors true NMEA Out 1 GDL90 0 DUMP1090 0 Stealth false No track false < screenshot of WebUI settings page > (required)
in the Web Config interface, it is not possible to program a custom ICAO ID overwriting the automatically generated ID of the SoftRF.
Start SoftRF, enter settings and observe that it is not possible to modify the ID
It shall be possible to enter a custom (ICAO) ID that is used after restart for the Device name (WIFI and BT) and on all air interface messages.
Hardware
Firmware version
https://github.com/astir13/SoftRF_standalone/commit/3deafedd0b14db367dfdf887e473f98229e6975c < screenshot of WebUI status page > (required)
Firmware settings
Mode 0 Protocol 0 Band 1 Aircraft type 1 Alarm trigger 1 Tx Power 0 Volume 1 LED pointer 0 Bluetooth 0 NMEA GNSS false NMEA Private true NMEA Legacy true NMEA Sensors true NMEA Out 1 GDL90 0 DUMP1090 0 Stealth false No track false < screenshot of WebUI settings page > (required)
Describe the bug (or ask a question)
in the Web Config interface, it is not possible to program a custom ICAO ID overwriting the automatically generated ID of the SoftRF.
To Reproduce
Start SoftRF, enter settings and observe that it is not possible to modify the ID
Expected behavior
It shall be possible to enter a custom (ICAO) ID that is used after restart for the Device name (WIFI and BT) and on all air interface messages.