Open altraWeb opened 5 months ago
i Have the same Question!!!
you need to flash the board with Katapult and set it in usb to can bridge mode. you can follow instructions here: https://github.com/Esoterical/voron_canbus/tree/0bbde71d092cf38e8d3855190a9cf860a7f238ab
you need to flash the board with Katapult and set it in usb to can bridge mode. you can follow instructions here: https://github.com/Esoterical/voron_canbus/tree/0bbde71d092cf38e8d3855190a9cf860a7f238ab
I flashed catapult per the katapult instructions. I can't get the board out of DFU mode. The DFU mode LED is on, but when I check dfu-utils -l there aren't any controllers in DFU. Only other thing I can do is double-click the reboot button and go into catapult flash mode. Hard reboot or anything doesn't fix the issue.
The documentation for this board is awful. I've had to get general information from other user guides to try to piece together information. For a "Premium" board, this is really sub-par documentation.
There are two canbus ports on this board but i can't find any howto's / Description to use that for example with an EBB SB2209.
Thanks for any help