bigtreetech / BIGTREETECH-TFT24-V1.1

BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes. The board is launched by the 3D printing team of Shenzhen BIGTREE Technology co., LTD. This board can replace LCD12864 for use.

52 stars 16 forks source link

SKR2.0 with TFT24 #36

Open azreal1983 opened 2 years ago

azreal1983 commented 2 years ago

Just moved from SKR1.3 to SKR2.0 with a TFT24 v1.1

Mainly work in emulation mode. Worked perfectly with SKR1.3. With SKR2.0 Emulation mode does not detect SD card (touch does) Also on booting I get a garbled screen. When booting with touch mode enabled the switching back all is ok. Tried changing serail port numbers, will baude rate effect the emulation mode?

radek8 commented 2 years ago

None of the serial port settings affect the emulated mode function.

In marlin mode, you will see the SD card slot that you install in marlin. It's a choice:

define SDCARD_CONNECTION ONBOARD

define SDCARD_CONNECTION LCD

The first enables the SD card on the SKR board, the second option enables the SD card on the display