try to use can via the board

bigtreetech / Octopus-Max-EZ

79 stars 21 forks source link

try to use can via the board #24

Open NDMR opened 5 months ago

NDMR commented 5 months ago

Hi,

I followed these instructions: Youtube.

The board does not appear after flashing via Katapult (CanBoot) with the same bootloader settings as in the Video. It remains in DFU mode and there is no by-id device.

Is there a solution?

juulius commented 2 weeks ago

i have got it working in can bridge mode, following this guide. https://canbus.esoterical.online/mainboard_flashing/common_hardware/BigTreeTech%20Octopus%20Max%20EZ/README.html

in there is a comment Katapult should now be successfully flashed. Take your mainboard out of DFU mode (it might require removing jumpers and rebooting, or just rebooting). Check that Katapult is installed and by running

i just preset reset on the board to get it working