search

bigtreetech / SKR-2

195 stars 178 forks source link

BTT SKR2.0 Random reboot while printing. #80

Closed hidra000 closed 3 years ago

hidra000 commented 3 years ago

I got a random reboot while printing. It accures every print within 30 minutes. Most of the times about 10 min while printing. On standby i accure no reboots. Octoprint is connected and gives the following logging. I updated to the latest Marlin to see if this would solve my problem but it dit not. I hope someone can help me out.

To test things out i pulled my sd card out. Disconnected the screen SKR 3.5 v3 touchscreen. Printed from an sd card But still got the same problem.

Moters are not hot / drivers are not hot eater.

Here is the logging from 2.0.9.1 and 2.0.9.2

Changing monitoring state from "Printing" to "Offline after error" Connection closed, closing down monitor Changing monitoring state from "Offline" to "Detecting serial connection" Performing autodetection with 1 port/baudrate candidates: /dev/ttyACM0@115200 Trying port /dev/ttyACM0, baudrate 115200 Connecting to port /dev/ttyACM0, baudrate 115200 Handshake attempt #1 with timeout 3.0s Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=3.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Send: N0 M110 N0125 Recv: ok Changing monitoring state from "Detecting serial connection" to "Operational" Send: N0 M110 N0125 Recv: ok Send: N1 M11539 Recv: FIRMWARE_NAME:Marlin 2.0.9.1 (Oct 26 2021 16:47:08) SOURCE_CODE_URL:github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:CR10 Max EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff Recv: Cap:SERIAL_XON_XOFF:0 Recv: Cap:BINARY_FILE_TRANSFER:0 Recv: Cap:EEPROM:1 Recv: Cap:VOLUMETRIC:1 Recv: Cap:AUTOREPORT_POS:1 Recv: Cap:AUTOREPORT_TEMP:1 Recv: Cap:PROGRESS:0 Recv: Cap:PRINT_JOB:1 Recv: Cap:AUTOLEVEL:1 Recv: Cap:RUNOUT:1 Recv: Cap:Z_PROBE:1 Recv: Cap:LEVELING_DATA:1 Recv: Cap:BUILD_PERCENT:0 Recv: Cap:SOFTWARE_POWER:0 Recv: Cap:TOGGLE_LIGHTS:0 Recv: Cap:CASE_LIGHT_BRIGHTNESS:0 Recv: Cap:EMERGENCY_PARSER:1 Recv: Cap:HOST_ACTION_COMMANDS:1 Recv: Cap:PROMPT_SUPPORT:1 Recv: Cap:SDCARD:1 Recv: Cap:REPEAT:0 Recv: Cap:SD_WRITE:1 Recv: Cap:AUTOREPORT_SD_STATUS:1 Recv: Cap:LONG_FILENAME:1 Recv: Cap:THERMAL_PROTECTION:1 Recv: Cap:MOTION_MODES:0 Recv: Cap:ARCS:1 Recv: Cap:BABYSTEPPING:1 Recv: Cap:CHAMBER_TEMPERATURE:0 Recv: Cap:COOLER_TEMPERATURE:0 Recv: Cap:MEATPACK:0 Recv: area:{full:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:470.0000,y:450.0000,z:470.0000}},work:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:470.0000,y:450.0000,z:470.0000}}} Recv: ok Send: M21 Recv: echo:No SD card Recv: //action:notification SD Init Fail Recv: ok Send: M154 S5 Recv: ok Send: M155 S2 Recv: ok Send: M876 P1 Recv: ok Send: M27 S1 Recv: ok Recv: Not SD printing Recv: T:130.76 /0.00 B:45.54 /0.00 @:0 B@:0 Recv: Not SD printing Recv: Not SD printing Changing monitoring state from "Printing" to "Offline after error" Connection closed, closing down monitor Changing monitoring state from "Offline" to "Detecting serial connection" Performing autodetection with 0 port/baudrate candidates: Changing monitoring state from "Detecting serial connection" to "Error" Changing monitoring state from "Error" to "Offline after error" Changing monitoring state from "Offline" to "Detecting serial connection" Performing autodetection with 1 port/baudrate candidates: /dev/ttyACM0@115200 Trying port /dev/ttyACM0, baudrate 115200 Connecting to port /dev/ttyACM0, baudrate 115200 Handshake attempt #1 with timeout 3.0s Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=3.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Send: N0 M110 N0125 Recv: ok Changing monitoring state from "Detecting serial connection" to "Operational" Send: N0 M110 N0125 Recv: ok Send: N1 M11539 Recv: FIRMWARE_NAME:Marlin 2.0.9.1 (Oct 26 2021 16:47:08) SOURCE_CODE_URL:github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:CR10 Max EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff Recv: Cap:SERIAL_XON_XOFF:0 Recv: Cap:BINARY_FILE_TRANSFER:0 Recv: Cap:EEPROM:1 Recv: Cap:VOLUMETRIC:1 Recv: Cap:AUTOREPORT_POS:1 Recv: Cap:AUTOREPORT_TEMP:1 Recv: Cap:PROGRESS:0 Recv: Cap:PRINT_JOB:1 Recv: Cap:AUTOLEVEL:1 Recv: Cap:RUNOUT:1 Recv: Cap:Z_PROBE:1 Recv: Cap:LEVELING_DATA:1 Recv: Cap:BUILD_PERCENT:0 Recv: Cap:SOFTWARE_POWER:0 Recv: Cap:TOGGLE_LIGHTS:0 Recv: Cap:CASE_LIGHT_BRIGHTNESS:0 Recv: Cap:EMERGENCY_PARSER:1 Recv: Cap:HOST_ACTION_COMMANDS:1 Recv: Cap:PROMPT_SUPPORT:1 Recv: Cap:SDCARD:1 Recv: Cap:REPEAT:0 Recv: Cap:SD_WRITE:1 Recv: Cap:AUTOREPORT_SD_STATUS:1 Recv: Cap:LONG_FILENAME:1 Recv: Cap:THERMAL_PROTECTION:1 Recv: Cap:MOTION_MODES:0 Recv: Cap:ARCS:1 Recv: Cap:BABYSTEPPING:1 Recv: Cap:CHAMBER_TEMPERATURE:0 Recv: Cap:COOLER_TEMPERATURE:0 Recv: Cap:MEATPACK:0 Recv: area:{full:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:470.0000,y:450.0000,z:470.0000}},work:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:470.0000,y:450.0000,z:470.0000}}} Recv: ok Send: M21 Recv: echo:No SD card Recv: //action:notification SD Init Fail Recv: ok Send: M154 S5 Recv: ok Send: M155 S2 Recv: ok Send: M876 P1 Recv: ok Send: M27 S1 Recv: ok Recv: Not SD printing Changing monitoring state from "Printing" to "Offline after error" Connection closed, closing down monitor Changing monitoring state from "Offline" to "Detecting serial connection" Performing autodetection with 1 port/baudrate candidates: /dev/ttyACM0@115200 Trying port /dev/ttyACM0, baudrate 115200 Connecting to port /dev/ttyACM0, baudrate 115200 Handshake attempt #1 with timeout 3.0s Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=3.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Send: N0 M110 N0125 Recv: ok Changing monitoring state from "Detecting serial connection" to "Operational" Send: N0 M110 N0125 Recv: ok Send: N1 M115*39 Recv: FIRMWARE_NAME:Marlin 2.0.9.1 (Oct 26 2021 16:47:08) SOURCE_CODE_URL:github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:CR10 Max EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff Recv: Cap:SERIAL_XON_XOFF:0 Recv: Cap:BINARY_FILE_TRANSFER:0 Recv: Cap:EEPROM:1 Recv: Cap:VOLUMETRIC:1 Recv: Cap:AUTOREPORT_POS:1 Recv: Cap:AUTOREPORT_TEMP:1 Recv: Cap:PROGRESS:0 Recv: Cap:PRINT_JOB:1 Recv: Cap:AUTOLEVEL:1 Recv: Cap:RUNOUT:1 Recv: Cap:Z_PROBE:1 Recv: Cap:LEVELING_DATA:1 Recv: Cap:BUILD_PERCENT:0 Recv: Cap:SOFTWARE_POWER:0 Recv: Cap:TOGGLE_LIGHTS:0 Recv: Cap:CASE_LIGHT_BRIGHTNESS:0 Recv: Cap:EMERGENCY_PARSER:1 Recv: Cap:HOST_ACTION_COMMANDS:1 Recv: Cap:PROMPT_SUPPORT:1 Recv: Cap:SDCARD:1 Recv: Cap:REPEAT:0 Recv: Cap:SD_WRITE:1 Recv: Cap:AUTOREPORT_SD_STATUS:1 Recv: Cap:LONG_FILENAME:1 Recv: Cap:THERMAL_PROTECTION:1 Recv: Cap:MOTION_MODES:0 Recv: Cap:ARCS:1 Recv: Cap:BABYSTEPPING:1 Recv: Cap:CHAMBER_TEMPERATURE:0 Recv: Cap:COOLER_TEMPERATURE:0 Recv: Cap:MEATPACK:0 Recv: area:{full:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:470.0000,y:450.0000,z:470.0000}},work:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:470.0000,y:450.0000,z:470.0000}}} Recv: ok Send: M21 Recv: echo:No SD card Recv: //action:notification SD Init Fail Recv: ok Send: M154 S5 Recv: ok Send: M155 S2 Recv: ok Send: M876 P1 Recv: ok Send: M27 S1 Recv: ok Recv: Not SD printing Recv: T:15.36 /0.00 B:15.39 /0.00 @:0 B@:0 Recv: Not SD printing Changing monitoring state from "Printing" to "Offline after error" Connection closed, closing down monitor

hidra000 commented 3 years ago

Problem Solved.

I find a short in the RS232 cable to the LCD. It was making contact to the frame.

chadulia commented 3 years ago

Hi, if you are using Ender 3, can you share the firmware for SKR 2 thank you?