search

bkabinashak47 / ardesia

Automatically exported from code.google.com/p/ardesia
0 stars 0 forks source link

Ardesia not work at Ubuntu 13.04 #60

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Open ardesia
2. Try draw screen
3. I can't see any line at screen but I can see my draw at ardesia tmp file.

What is the expected output? What do you see instead?

I can't see ardesia screen draw result at my desktop

What version of the product are you using? On what operating system?

Ardesia Verion  : 1.1-1
Operation System : Ubuntu 13.04 with Unity

Please provide any additional information below.

Original issue reported on code.google.com by ertaner...@gmail.com on 28 May 2013 at 11:43

GoogleCodeExporter commented 9 years ago 
I tried trunk ( 1.2-1 ) version on ubuntu-gnome ubuntu-unity but result same, 
we can't draw screenand just see white color continuously

Original comment by ertaner...@gmail.com on 15 Jul 2013 at 7:42

Attachments:

GoogleCodeExporter commented 9 years ago 
Same problem with Mint 15 Xfce. Running from terminal gives:

chris@mapuana ~/Temp/downloads $ ardesia
Enabled Device in screen 2. 0x256b080: "Virtual core pointer" (Type: 0)

(process:3550): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size 
== 0' failed
Segmentation fault

Original comment by christop...@rosalindfranklin.edu on 18 Jul 2013 at 3:23

GoogleCodeExporter commented 9 years ago 
An earlier version (1.01) seems to work fine. I uninstalled the latest version 
completely, then just downloaded and installed 1.01 --> success!

Original comment by christop...@rosalindfranklin.edu on 18 Jul 2013 at 3:58

GoogleCodeExporter commented 9 years ago 
My problem continue 1.01

Original comment by ertaner...@gmail.com on 18 Jul 2013 at 6:18

GoogleCodeExporter commented 9 years ago 
When I uninstalled the newer version, I used Synaptic's "mark for complete 
removal" function. I figured that this would clean out whatever supporting 
library was misbehaving. Only then did I install the earlier version. If that 
doesn't do the job for you, then I'm stumped; sorry.

You don't say what, specifically, you want to do with Ardesia. For general 
screen annotation, you might try Gromit, which is in the *buntu repos. It's 
quirky, but when it works properly it does a good job.

Xournal works very well for annotating pdfs and for drawing on a white or 
colored background; it even has layers. And LibreOffice Impress allows drawing 
on a slide by right-clicking on a slide and choosing "use mouse as pen". For 
simple drawing, one can use a blank (i.e. plain white) slide.

Original comment by christop...@rosalindfranklin.edu on 19 Jul 2013 at 4:28

GoogleCodeExporter commented 9 years ago 
Please try the trunk code

Original comment by pilolli....@gmail.com on 30 Jul 2013 at 11:28

GoogleCodeExporter commented 9 years ago 
A warm hello to Italy! I tried the trunk version (revision 3004) of Ardesia-1.2 
on Ubuntu 13.04 and encountered the same (non-)effect as the original poster 
(as well as with 1.1 before). Upon closing the program, the drawing flashed 
briefly on the screen before the program finally closed. Running Ardesia from 
the command line listed some X-devices but no error.

Many thanks for this great program! I had it running on my computer before and 
I sincerely hope that it gets up and running soon!

Original comment by 8ps...@gmail.com on 8 Sep 2013 at 2:08

GoogleCodeExporter commented 9 years ago 
I can confirm this behaviour in Kubuntu 13.04. Upon closing, the "overlay" 
briefly flashes, but nothing is visible during drawing

Original comment by pascal....@gmail.com on 17 Sep 2013 at 3:21

GoogleCodeExporter commented 9 years ago 
I start use Fedora 19 and have same problem. So Unity and Gnome have same 
problem.

Original comment by ertaner...@gmail.com on 16 Oct 2013 at 10:46

GoogleCodeExporter commented 9 years ago 
ardesia 1.2 (C) 2009-2010 Pietro Pilolli
[e-diablo@homless ~]$ ardesia -g west
No such schema 'org.florence.behaviour'
Fail to hide virtual keyboard: Florence and gsettings packages are required
Enabled Device in screen 1. 0x2487080: "Virtual core pointer" (Type: 0)
Enabled Device in screen 1. 0x2487680: "SynPS/2 Synaptics TouchPad" (Type: 6)
Enabled Device in screen 1. 0x2487580: "Logitech USB Receiver" (Type: 0)
Enabled Device in screen 1. 0x2487500: "Logitech USB Receiver" (Type: 0)
Enabled Device in screen 1. 0x2487180: "Virtual core XTEST pointer" (Type: 0)

I get that fail line if I want work with gnome "No such schema 
'org.florence.behaviour'"

Original comment by ertaner...@gmail.com on 18 Oct 2013 at 6:42

GoogleCodeExporter commented 9 years ago 
With reference to gromit (made above under #5):

It does not work either in Kubuntu 13.04... seems to be the same problem than 
with ardesia. Activation using the Pause key works, but the drawing remains 
invisible.

Original comment by pascal....@gmail.com on 6 Nov 2013 at 9:08

GoogleCodeExporter commented 9 years ago 
soy nuevo en ubuntu o en linuk Ardesia parece ser el programa que estoy 
buscando pero no me trabaja correctamente, no se ve nada

Original comment by isidrojl...@gmail.com on 9 Nov 2013 at 11:56

GoogleCodeExporter commented 9 years ago 
Same problem. Invisible drawing... This is showing in terminal:

Enabled Device in screen 2. 0x81bbcf0: "Virtual core pointer" (Type: 0)

I think this is a framebuffer (composite) issue...  

I hope help us with this information.

Original comment by h...@fisica.ufmt.br on 6 Dec 2013 at 1:11

GoogleCodeExporter commented 9 years ago 
en kubuntu 13.10 no veo lo que dibujo, pero cuando intento cerrar la barra de 
menú aparece repentinamente y desaparece lo que dibujé anteriormente

Original comment by wno...@gmail.com on 18 Feb 2014 at 9:17

GoogleCodeExporter commented 9 years ago 
SAME PROBLEM here, with a new Thinkpad. I tried Unity, gnome, cinnamon. No 
effect

Original comment by marcello...@gmail.com on 4 Apr 2014 at 7:50

GoogleCodeExporter commented 9 years ago 
Ardesia it's working for me with Ubuntu 14.04, only different thing was i 
started with command line "$ardesia -g south"

Original comment by fra...@gmail.com on 23 Apr 2014 at 3:02

GoogleCodeExporter commented 9 years ago 
But I start use Fedora 20 with gnome and if you use Ubuntu then you not need 
Ardesia because Ubuntu already have another working sketpatch/screen draw 
software... I am talking about Compiz...

Original comment by ertaner...@gmail.com on 23 Apr 2014 at 6:43

GoogleCodeExporter commented 9 years ago 
not working, the draws are invisible and pop up when quit.

Ubuntu 14.04.1 in xfce session (install xfce4 and compiz, login xfce session 
and enable compiz)

and if it is started by: ardesia -g south

** (ardesia:2341): WARNING **: Couldn't connect to accessibility bus: Failed to 
connect to socket /tmp/dbus-Fn8hQx5EQ5: Connection refused
Enabled Device in screen 2. 0x1245590: "Virtual core pointer" (Type: 0)
Segmentation fault

Original comment by cdt.w...@gmail.com on 24 Sep 2014 at 9:50

GoogleCodeExporter commented 9 years ago 
The same for me: nothing is displayed running the program. Only when closing it 
the image of what I drew flashes on the screen.

When reviewing what was saved during session, all my drawings are there.

Running the program from console says:
"
** (ardesia:PID)  WARNING **: Couldn't connect to accessibility bus: Failed to 
connect to socket /tmp/dbus-Kbkfn9ttWB: Connection refused
"

After entering the "project name" it says:

"
Enabled Device in screen 2. 0xe3ed90: "Virtual core pointer" (Type: 0)
"

May be this "screen 2" the problem, it is writing things somewhere else?
I get no "Segmentation fault" error.

I'm on Trisquel 7.0 with Gnome Classic.

Original comment by jaume...@gmail.com on 16 Dec 2014 at 7:50