search

bogaudio / BogaudioModules

Modules for VCV Rack.
Other
268 stars 33 forks source link

SLEW does not work properly in slow mode with sample rate above 48 kHz #221

Closed DaveBenham closed 1 year ago

DaveBenham commented 1 year ago

As long as VCV sample rate is 48 kHz or below, then SLEW in slow mode seems to work just fine.

Bat at 96 kHz and SLEW in slow mode, rise / fall at 10 (100 s/V), and current voltage at 0 or 10 V, then a 10 volt change results in no change. For example, when applying a toggled 10V gate to the input.

With a VCV sample rate of 196 kHz and SLEW in slow mode, the output never moves, regardless what the input value is or the Rise / Fall setting.

Tested on both Windows and Mac. My VCV version is 2.1.2

mdemanett commented 1 year ago

Interesting. I'll take a look.

mdemanett commented 1 year ago

Should be fixed; at high sample rates some the numbers get very small, and it would stop updating.

DaveBenham commented 1 year ago

Great news. Thanks :)

On Sun, Feb 19, 2023 at 6:52 PM Matt Demanett @.***> wrote:

Should be fixed; at high sample rates some the numbers get very small, and it would stop updating.

— Reply to this email directly, view it on GitHub https://github.com/bogaudio/BogaudioModules/issues/221#issuecomment-1436135573, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEHPDWPCXNPGR5DNL43QZ73WYKW3HANCNFSM6AAAAAAUQ4ZILM . You are receiving this because you authored the thread.Message ID: @.***>