Aryankids
commented
2 years ago Issue fixed by a new version of NimBLE supported by them!
Closed Aryankids closed 2 years ago
Aryankids
commented
2 years ago Issue fixed by a new version of NimBLE supported by them!
Have compiled and uploaded the code successfully to the ESP32 board but it cannot stay connected to the AM43 over Bluetooth. it gets disconnected (failed connection) almost instantly.
It only attempts to connect to the unit twice then no more attempts. It just sits there. Connection to MQTT server etc is flawless
13:25:47.585 -> BLE scan complete. 13:25:47.622 -> Attempting to connect to: 02:98:c2:99:bd:ba ...[0298c299bdba] Connected 13:25:47.622 -> - Failed to connect. 13:25:48.453 -> Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled. 13:25:48.486 -> 13:25:48.486 -> Core 0 register dump: 13:25:48.486 -> PC : 0x40095b95 PS : 0x00060b33 A0 : 0x800db5cc A1 : 0x3ffdc230
13:25:48.486 -> A2 : 0x00000010 A3 : 0x3ffbf1c8 A4 : 0x00000000 A5 : 0x00000002
13:25:48.486 -> A6 : 0x00000002 A7 : 0x00000000 A8 : 0x80095b83 A9 : 0x00000110
13:25:48.486 -> A10 : 0x00000001 A11 : 0x3ffc60f8 A12 : 0x3ffc60f8 A13 : 0x00060b23
13:25:48.524 -> A14 : 0x00060b20 A15 : 0x00000001 SAR : 0x00000010 EXCCAUSE: 0x0000001c
13:25:48.524 -> EXCVADDR: 0x00000164 LBEG : 0x4009086c LEND : 0x40090877 LCOUNT : 0x00000000
13:25:48.524 -> 13:25:48.524 -> 13:25:48.524 -> Backtrace:0x40095b92:0x3ffdc2300x400db5c9:0x3ffdc250 0x400e14d1:0x3ffdc2d0 0x400e151b:0x3ffdc2f0 0x400e29c3:0x3ffdc310 0x400df90d:0x3ffdc370 0x400df741:0x3ffdc3a0 0x400e676b:0x3ffdc3d0 0x400e5298:0x3ffdc400 0x400e52a3:0x3ffdc420 0x400ec0ae:0x3ffdc440 0x400db967:0x3ffdc460 13:25:48.558 -> 13:25:48.558 -> 13:25:48.558 -> 13:25:48.558 -> 13:25:48.558 -> ELF file SHA256: 0000000000000000 13:25:48.558 -> 13:25:48.558 -> Rebooting... 13:25:48.558 -> ets Jun 8 2016 00:22:57 13:25:48.558 -> 13:25:48.558 -> rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) 13:25:48.558 -> configsip: 0, SPIWP:0xee 13:25:48.558 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 13:25:48.558 -> mode:DIO, clock div:1 13:25:48.558 -> load:0x3fff0030,len:1184 13:25:48.558 -> load:0x40078000,len:12804 13:25:48.592 -> ho 0 tail 12 room 4 13:25:48.592 -> load:0x40080400,len:3032 13:25:48.592 -> entry 0x400805e4 13:25:48.938 -> Starting Arduino BLE Client application... 13:25:48.938 -> Using NimBLE stack. 13:25:49.942 -> Wifi connecting to: MyNetwork ... 13:25:49.942 -> [WiFi-event] event: 0 13:25:50.047 -> [WiFi-event] event: 2 13:25:50.047 -> AllowList contains the following device(s): 13:25:50.047 -> Mac: 02:98:c2:99:bd:ba 13:25:50.254 -> Configuring WDT... 13:25:51.044 -> BLE Advertised Device found: Name: OfficeBlind, Address: 02:98:c2:99:bd:ba, manufacturer data: 0000, serviceUUID: 0xfe50 13:25:53.050 -> [WiFi-event] event: 4 13:25:53.494 -> [WiFi-event] event: 7 13:25:53.494 -> WiFi connected 13:25:53.494 -> IP address: 192.168.1.112 13:25:53.494 -> Attempting MQTT connection... 13:25:53.494 -> connected 13:25:54.487 -> MQTT [am43/enable]2: ON 13:25:54.487 -> Addr: enable Cmd: am43/enable 13:25:54.487 -> Enabling BLE Clients 13:26:00.276 -> BLE scan complete. 13:26:00.276 -> Attempting to connect to: 02:98:c2:99:bd:ba ...[0298c299bdba] Connected 13:26:00.276 -> - Failed to connect. 13:26:02.276 -> Up for 13s 13:26:12.287 -> BLE scan complete
Same Information in the debug mood:
17:30:59.395 -> I NimBLEScan: "New advertiser: 02:98:c2:99:bd:ba" 17:30:59.395 -> I NimBLEScan: "Updated advertiser: 02:98:c2:99:bd:ba" 17:30:59.395 -> BLE Advertised Device found: Name: OfficeBlind, Address: 02:98:c2:99:bd:ba, manufacturer data: 0000, serviceUUID: 0xfe50 17:30:59.740 -> [ 4151][D][WiFiGeneric.cpp:831] _eventCallback(): Arduino Event: 4 - STA_CONNECTED 17:30:59.777 -> [WiFi-event] event: 4 17:31:00.151 -> [ 4561][D][WiFiGeneric.cpp:831] _eventCallback(): Arduino Event: 7 - STA_GOT_IP 17:31:00.187 -> [ 4561][D][WiFiGeneric.cpp:880] _eventCallback(): STA IP: 192.168.1.112, MASK: 255.255.255.0, GW: 192.168.1.1 17:31:00.187 -> [WiFi-event] event: 7 17:31:00.187 -> WiFi connected 17:31:00.187 -> IP address: 192.168.1.112 17:31:00.187 -> Attempting MQTT connection... 17:31:00.187 -> I NimBLEScan: "New advertiser: ca:1e:d0:92:6d:06" 17:31:00.255 -> connected 17:31:06.962 -> D NimBLEScan: "discovery complete; reason=0" 17:31:06.962 -> BLE scan complete. 17:31:06.995 -> Attempting to connect to: 02:98:c2:99:bd:ba ...D NimBLEClient: ">> connect(02:98:c2:99:bd:ba)" 17:31:06.995 -> I NimBLEClient: "Connection established" 17:31:06.995 -> [0298c299bdba] Connected 17:31:06.995 -> D NimBLEClient: "<< connect()" 17:31:06.995 -> - Failed to connect. 17:31:07.491 -> D NimBLEClient: "Got Client event " 17:31:07.491 -> I NimBLEClient: "Connected event" 17:31:07.560 -> D NimBLEClient: "Got Client event " 17:31:07.593 -> I NimBLEClient: "mtu update event; conn_handle=0 mtu=247" 17:31:08.532 -> D NimBLEClient: "Got Client event " 17:31:08.532 -> D NimBLEClient: "Peer requesting to update connection parameters" 17:31:08.532 -> D NimBLEClient: "MinInterval: 20, MaxInterval: 20, Latency: 0, Timeout: 500" 17:31:08.532 -> Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled. 17:31:08.566 -> 17:31:08.566 -> Core 0 register dump: 17:31:08.566 -> PC : 0x400dde8f PS : 0x00060130 A0 : 0x800e4b54 A1 : 0x3ffdc8b0
17:31:08.566 -> A2 : 0x00000000 A3 : 0x3ffdd9f0 A4 : 0x3ffdc9ac A5 : 0x3f403137
17:31:08.566 -> A6 : 0x3f40281c A7 : 0x000001f4 A8 : 0x800dde85 A9 : 0x3ffdc860
17:31:08.566 -> A10 : 0x3ffdcd58 A11 : 0x3ffdd9f0 A12 : 0x3ffdca14 A13 : 0x3ffdc860
17:31:08.602 -> A14 : 0x00000014 A15 : 0x00000014 SAR : 0x00000004 EXCCAUSE: 0x0000001c
17:31:08.602 -> EXCVADDR: 0x00000010 LBEG : 0x40090e19 LEND : 0x40090e29 LCOUNT : 0xfffffffc
17:31:08.602 -> 17:31:08.602 -> 17:31:08.602 -> Backtrace:0x400dde8c:0x3ffdc8b00x400e4b51:0x3ffdc960 0x400e4b9b:0x3ffdc980 0x400e5011:0x3ffdc9a0 0x400eb437:0x3ffdca00 0x400eb3a6:0x3ffdca40 0x400ea0cf:0x3ffdca70 0x400e8bfc:0x3ffdcaa0 0x400e8c07:0x3ffdcac0 0x400efa12:0x3ffdcae0 0x400de222:0x3ffdcb00 17:31:08.635 -> 17:31:08.635 -> 17:31:08.635 -> 17:31:08.635 -> 17:31:08.635 -> ELF file SHA256: 0000000000000000 17:31:08.635 -> 17:31:08.635 -> Rebooting... 17:31:08.635 -> ets Jun 8 2016 00:22:57 17:31:08.635 -> 17:31:08.635 -> rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) 17:31:08.635 -> configsip: 0, SPIWP:0xee 17:31:08.635 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 17:31:08.635 -> mode:DIO, clock div:1 17:31:08.635 -> load:0x3fff0030,len:1184 17:31:08.635 -> load:0x40078000,len:12804 17:31:08.635 -> ho 0 tail 12 room 4 17:31:08.635 -> load:0x40080400,len:3032 17:31:08.670 -> entry 0x400805e4 17:31:09.014 -> [ ⸮⸮mum⸮⸮⸮⸮2-hal-cpu.c:211] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz 17:31:09.014 -> Starting Arduino BLE Client application... 17:31:09.014 -> Using NimBLE stack. 17:31:10.018 -> Wifi connecting to: MyNetwork ... 17:31:10.052 -> [ 1040][D][WiFiGeneric.cpp:831] _eventCallback(): Arduino Event: 0 - WIFI_READY 17:31:10.052 -> [WiFi-event] event: 0 17:31:10.119 -> [ 1130][D][WiFiGeneric.cpp:831] _eventCallback(): Arduino Event: 2 - STA_START 17:31:10.152 -> [WiFi-event] event: 2 17:31:10.152 -> AllowList contains the following device(s): 17:31:10.152 -> Mac: 02:98:c2:99:bd:ba 17:31:10.152 -> [ 1153][I][ArduinoOTA.cpp:141] begin(): OTA server at: esp32-58bf253703a8.local:3232 17:31:10.330 -> I NimBLEDevice: "BLE Host Task Started" 17:31:10.330 -> I NimBLEDevice: "NimBle host synced." 17:31:10.364 -> D NimBLEScan: ">> start(duration=10)" 17:31:10.364 -> D NimBLEScan: "<< start()" 17:31:10.364 -> Configuring WDT...
What I have noticed, although it is failed to connect over BLE and it cannot report back to the HA the status of the controller, it does not allow any other Bluetooth devices to connect to the AM43 unless I unplug the ESP32 device to force it to release the connection.
HTH