search

bypassrg / att

Using Asuswrt-Merlin to bypass AT&T's residential gateway
MIT License
155 stars 36 forks source link

Authentication fails after 1st reboot #11

Open vpatil131 opened 4 years ago

vpatil131 commented 4 years ago

Hello,

Thanks for the guide. I was able to establish EAP authentication by connecting my Asus AC68U router to ONT directly.

#/opt/usr/sbin/wpa_supplicant -dd -Dwired -ieth0 -c/jffs/EAP/wpa_supplicant.conf
Successfully initialized wpa_supplicant
eth0: Associated with 01:80:c2:00:00:03
WMM AC: Missing IEs
eth0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
eth0: CTRL-EVENT-EAP-STARTED EAP authentication started
eth0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
eth0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
eth0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='C=US, ST=Michigan, L=Southfield, O=ATT Services Inc, OU=OCATS, CN=aut02pltnca.pltnca.sbcglobal.net' hash=a1de433f731a03447a3187ffd3cbe12XXXXXXX
eth0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='C=US, O=ATT Services Inc, CN=ATT Services Inc Enhanced Services CA' hash=a1de433f731a03447a3187ffd3cbe12XXXXXXX
eth0: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully

However, this only works once when I set it up. I can never get it to connect again after the 1st reboot. I verified the date and tried disabling the auto startup script and just manually running following command but no luck.

# /opt/usr/sbin/wpa_supplicant -dd -Dwired -ieth0 -c/jffs/EAP/wpa_supplicant.conf
Successfully initialized wpa_supplicant
eth0: Associated with 01:80:c2:00:00:03
WMM AC: Missing IEs
eth0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
eth0: CTRL-EVENT-EAP-FAILURE EAP authentication failed

For instance, I don't see the eth0: CTRL-EVENT-EAP-STARTED EAP authentication started.

Do you know what could be going wrong?

Thanks

mshuaic commented 4 years ago

Check the system time. If the system is not the current time, you probably need to install fake hwclock, and make a corn job.