kali provlem

[al-redowan]

udo apt-get update sudo apt-get install python3-dev libffi-dev libssl-dev libxml2-dev libxslt1-dev zlib1g-dev sudo apt-get install python3.11-dev pip install --upgrade pillow twisted pycrypto pycryptodome Get:1 http://kali.download/kali kali-rolling InRelease [41.5 kB] Get:2 http://kali.download/kali kali-rolling/main amd64 Packages [19.7 MB] Get:3 http://kali.download/kali kali-rolling/main amd64 Contents (deb) [47.3 MB]
Get:4 http://kali.download/kali kali-rolling/contrib amd64 Packages [109 kB]
Get:5 http://kali.download/kali kali-rolling/contrib amd64 Contents (deb) [267 kB]
Get:6 http://kali.download/kali kali-rolling/non-free amd64 Packages [193 kB]
Get:7 http://kali.download/kali kali-rolling/non-free amd64 Contents (deb) [863 kB]
Get:8 http://kali.download/kali kali-rolling/non-free-firmware amd64 Packages [33.1 kB]
Get:9 http://kali.download/kali kali-rolling/non-free-firmware amd64 Contents (deb) [16.9 kB]
Fetched 68.6 MB in 2min 9s (533 kB/s)
Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: libnsl-dev libtirpc-dev Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: libffi8 libpython3-all-dev libpython3-dev libpython3-stdlib libxml2 libxml2-utils libxslt1.1 python3 python3-all python3-all-dev python3-distutils python3-lib2to3 python3-minimal python3-tk xsltproc zlib1g Suggested packages: libssl-doc pkg-config python3-doc python3-venv tix python3-tk-dbg The following NEW packages will be installed: libssl-dev libxslt1-dev The following packages will be upgraded: libffi-dev libffi8 libpython3-all-dev libpython3-dev libpython3-stdlib libxml2 libxml2-dev libxml2-utils libxslt1.1 python3 python3-all python3-all-dev python3-dev python3-distutils python3-lib2to3 python3-minimal python3-tk xsltproc zlib1g zlib1g-dev 20 upgraded, 2 newly installed, 0 to remove and 1759 not upgraded. Need to get 3,046 kB/6,485 kB of archives. After this operation, 17.6 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://kali.download/kali kali-rolling/main amd64 libssl-dev amd64 3.2.2-1 [2,701 kB] Get:2 http://mirror.kku.ac.th/kali kali-rolling/main amd64 libxslt1-dev amd64 1.1.35-1.1 [345 kB] Fetched 3,046 kB in 7s (414 kB/s)
(Reading database ... 404408 files and directories currently installed.) Preparing to unpack .../0-python3-all-dev_3.11.8-1_amd64.deb ... Unpacking python3-all-dev (3.11.8-1) over (3.11.6-1) ... Preparing to unpack .../1-python3-all_3.11.8-1_amd64.deb ... Unpacking python3-all (3.11.8-1) over (3.11.6-1) ... Preparing to unpack .../2-libpython3-all-dev_3.11.8-1_amd64.deb ... Unpacking libpython3-all-dev:amd64 (3.11.8-1) over (3.11.6-1) ... Preparing to unpack .../3-libpython3-dev_3.11.8-1_amd64.deb ... Unpacking libpython3-dev:amd64 (3.11.8-1) over (3.11.6-1) ... Preparing to unpack .../4-python3-dev_3.11.8-1_amd64.deb ... Unpacking python3-dev (3.11.8-1) over (3.11.6-1) ... Preparing to unpack .../5-python3-minimal_3.11.8-1_amd64.deb ... Unpacking python3-minimal (3.11.8-1) over (3.11.6-1) ... Setting up python3-minimal (3.11.8-1) ... (Reading database ... 404408 files and directories currently installed.) Preparing to unpack .../0-python3_3.11.8-1_amd64.deb ... running python pre-rtupdate hooks for python3.11... Unpacking python3 (3.11.8-1) over (3.11.6-1) ... Preparing to unpack .../1-python3-distutils_3.12.3-3.1_all.deb ... Unpacking python3-distutils (3.12.3-3.1) over (3.11.5-1) ... Preparing to unpack .../2-python3-lib2to3_3.12.3-3.1_all.deb ... Unpacking python3-lib2to3 (3.12.3-3.1) over (3.11.5-1) ... Preparing to unpack .../3-libpython3-stdlib_3.11.8-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.11.8-1) over (3.11.6-1) ... Preparing to unpack .../4-libffi-dev_3.4.6-1_amd64.deb ... Unpacking libffi-dev:amd64 (3.4.6-1) over (3.4.4-2) ... Preparing to unpack .../5-libffi8_3.4.6-1_amd64.deb ... Unpacking libffi8:amd64 (3.4.6-1) over (3.4.4-2) ... Setting up libffi8:amd64 (3.4.6-1) ... (Reading database ... 404409 files and directories currently installed.) Preparing to unpack .../zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1) over (1:1.3.dfsg-3+b1) ... Preparing to unpack .../zlib1g_1%3a1.3.dfsg+really1.3.1-1_amd64.deb ... Unpacking zlib1g:amd64 (1:1.3.dfsg+really1.3.1-1) over (1:1.3.dfsg-3+b1) ... Setting up zlib1g:amd64 (1:1.3.dfsg+really1.3.1-1) ... Selecting previously unselected package libssl-dev:amd64. (Reading database ... 404407 files and directories currently installed.) Preparing to unpack .../0-libssl-dev_3.2.2-1_amd64.deb ... Unpacking libssl-dev:amd64 (3.2.2-1) ... Preparing to unpack .../1-libxml2-dev_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2-dev:amd64 (2.9.14+dfsg-1.3+b3) over (2.9.14+dfsg-1.3+b2) ... Preparing to unpack .../2-libxml2_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b3) over (2.9.14+dfsg-1.3+b2) ... Preparing to unpack .../3-libxml2-utils_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2-utils (2.9.14+dfsg-1.3+b3) over (2.9.14+dfsg-1.3+b2) ... Preparing to unpack .../4-libxslt1.1_1.1.35-1.1_amd64.deb ... Unpacking libxslt1.1:amd64 (1.1.35-1.1) over (1.1.35-1) ... Selecting previously unselected package libxslt1-dev:amd64. Preparing to unpack .../5-libxslt1-dev_1.1.35-1.1_amd64.deb ... Unpacking libxslt1-dev:amd64 (1.1.35-1.1) ... Preparing to unpack .../6-python3-tk_3.12.3-3.1_amd64.deb ... Unpacking python3-tk:amd64 (3.12.3-3.1) over (3.11.5-1) ... Preparing to unpack .../7-xsltproc_1.1.35-1.1_amd64.deb ... Unpacking xsltproc (1.1.35-1.1) over (1.1.35-1) ... Setting up libpython3-dev:amd64 (3.11.8-1) ... Setting up libffi-dev:amd64 (3.4.6-1) ... Setting up libpython3-all-dev:amd64 (3.11.8-1) ... Setting up libssl-dev:amd64 (3.2.2-1) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up libpython3-stdlib:amd64 (3.11.8-1) ... Setting up python3 (3.11.8-1) ... running python rtupdate hooks for python3.11... running python post-rtupdate hooks for python3.11... Setting up libxml2-dev:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up libxslt1.1:amd64 (1.1.35-1.1) ... Setting up libxml2-utils (2.9.14+dfsg-1.3+b3) ... Setting up python3-lib2to3 (3.12.3-3.1) ... Setting up python3-distutils (3.12.3-3.1) ... python3.12: can't get files for byte-compilation Setting up libxslt1-dev:amd64 (1.1.35-1.1) ... Setting up xsltproc (1.1.35-1.1) ... Setting up python3-all (3.11.8-1) ... Setting up python3-tk:amd64 (3.12.3-3.1) ... Setting up python3-dev (3.11.8-1) ... Setting up python3-all-dev (3.11.8-1) ... Processing triggers for doc-base (0.11.2) ... Processing 39 changed doc-base files, 1 added doc-base file... Processing triggers for libc-bin (2.38-13) ... Processing triggers for man-db (2.12.0-3) ... Processing triggers for kali-menu (2023.4.7) ... Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: libnsl-dev libtirpc-dev Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: libdb5.3t64 libexpat1 libexpat1-dev libpython3.11-dev libpython3.11-minimal libpython3.11-stdlib libpython3.11t64 libreadline8t64 python3.11 python3.11-minimal readline-common Suggested packages: python3.11-venv python3.11-doc binfmt-support readline-doc The following packages will be REMOVED: libdb5.3 libpython3.11 libreadline8 The following NEW packages will be installed: libdb5.3t64 libpython3.11t64 libreadline8t64 The following packages will be upgraded: libexpat1 libexpat1-dev libpython3.11-dev libpython3.11-minimal libpython3.11-stdlib python3.11 python3.11-dev python3.11-minimal readline-common 9 upgraded, 3 newly installed, 3 to remove and 1750 not upgraded. Need to get 12.9 MB/13.3 MB of archives. After this operation, 730 kB disk space will be freed. Do you want to continue? [Y/n] y Get:1 http://kali.download/kali kali-rolling/main amd64 libpython3.11t64 amd64 3.11.9-1 [1,960 kB] Get:2 http://kali.cs.nycu.edu.tw/kali kali-rolling/main amd64 libpython3.11-dev amd64 3.11.9-1 [4,513 kB] Get:6 http://kali.download/kali kali-rolling/main amd64 libpython3.11-minimal amd64 3.11.9-1 [817 kB]
Get:9 http://http.kali.org/kali kali-rolling/main amd64 libdb5.3t64 amd64 5.3.28+dfsg2-7 [697 kB]
Get:3 http://kali.cs.nycu.edu.tw/kali kali-rolling/main amd64 python3.11-dev amd64 3.11.9-1 [501 kB]
Get:4 http://kali.cs.nycu.edu.tw/kali kali-rolling/main amd64 python3.11 amd64 3.11.9-1 [602 kB]
Get:5 http://kali.cs.nycu.edu.tw/kali kali-rolling/main amd64 python3.11-minimal amd64 3.11.9-1 [1,879 kB]
Get:7 http://kali.cs.nycu.edu.tw/kali kali-rolling/main amd64 libreadline8t64 amd64 8.2-4 [167 kB]
Get:8 http://kali.cs.nycu.edu.tw/kali kali-rolling/main amd64 libpython3.11-stdlib amd64 3.11.9-1 [1,792 kB]
Fetched 12.9 MB in 1min 5s (200 kB/s)
(Reading database ... 404757 files and directories currently installed.) Preparing to unpack .../libexpat1-dev_2.6.2-1_amd64.deb ... Unpacking libexpat1-dev:amd64 (2.6.2-1) over (2.5.0-2+b2) ... Preparing to unpack .../libexpat1_2.6.2-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.2-1) over (2.5.0-2+b2) ... dpkg: libpython3.11:amd64: dependency problems, but removing anyway as you requested: python3.11-dev depends on libpython3.11 (= 3.11.8-1). python3-talloc:amd64 depends on libpython3.11 (>= 3.11.5). python3-samba depends on libpython3.11 (>= 3.11.5). python3-pyqt5 depends on libpython3.11 (>= 3.11.5). python3-ldb depends on libpython3.11 (>= 3.11.5). libpython3.11-dev:amd64 depends on libpython3.11 (= 3.11.8-1).

(Reading database ... 404756 files and directories currently installed.) Removing libpython3.11:amd64 (3.11.8-1) ... Selecting previously unselected package libpython3.11t64:amd64. (Reading database ... 404751 files and directories currently installed.) Preparing to unpack .../0-libpython3.11t64_3.11.9-1_amd64.deb ... Unpacking libpython3.11t64:amd64 (3.11.9-1) ... Preparing to unpack .../1-libpython3.11-dev_3.11.9-1_amd64.deb ... Unpacking libpython3.11-dev:amd64 (3.11.9-1) over (3.11.8-1) ... Preparing to unpack .../2-python3.11-dev_3.11.9-1_amd64.deb ... Unpacking python3.11-dev (3.11.9-1) over (3.11.8-1) ... Preparing to unpack .../3-python3.11_3.11.9-1_amd64.deb ... Unpacking python3.11 (3.11.9-1) over (3.11.8-1) ... Preparing to unpack .../4-python3.11-minimal_3.11.9-1_amd64.deb ... Unpacking python3.11-minimal (3.11.9-1) over (3.11.8-1) ... Preparing to unpack .../5-libpython3.11-minimal_3.11.9-1_amd64.deb ... Unpacking libpython3.11-minimal:amd64 (3.11.9-1) over (3.11.8-1) ... dpkg: libreadline8:amd64: dependency problems, but removing anyway as you requested: wpasupplicant depends on libreadline8 (>= 6.0). sqsh depends on libreadline8 (>= 6.0). sqlite3 depends on libreadline8 (>= 6.0). smbclient depends on libreadline8 (>= 6.0). samba-common-bin depends on libreadline8 (>= 6.0). rpm depends on libreadline8 (>= 6.0). postgresql-client-16 depends on libreadline8 (>= 6.0). pipewire-bin depends on libreadline8 (>= 6.0). parted depends on libreadline8 (>= 6.0). opensc depends on libreadline8 (>= 6.0). network-manager depends on libreadline8 (>= 6.0). libpython3.12-stdlib:amd64 depends on libreadline8 (>= 7.0~beta). libpython3.11-stdlib:amd64 depends on libreadline8 (>= 7.0~beta). libpython2.7-stdlib:amd64 depends on libreadline8 (>= 7.0~beta). libfluidsynth3:amd64 depends on libreadline8 (>= 6.0). gpgsm depends on libreadline8 (>= 6.0). gpgconf depends on libreadline8 (>= 6.0). gpg depends on libreadline8 (>= 6.0). gnupg-utils depends on libreadline8 (>= 6.0). gawk depends on libreadline8 (>= 6.0). fdisk depends on libreadline8 (>= 6.0). cadaver depends on libreadline8 (>= 6.0). bluez depends on libreadline8 (>= 6.0).

(Reading database ... 404756 files and directories currently installed.) Removing libreadline8:amd64 (8.2-3) ... Selecting previously unselected package libreadline8t64:amd64. (Reading database ... 404743 files and directories currently installed.) Preparing to unpack .../libreadline8t64_8.2-4_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.2-4) ... Preparing to unpack .../libpython3.11-stdlib_3.11.9-1_amd64.deb ... Unpacking libpython3.11-stdlib:amd64 (3.11.9-1) over (3.11.8-1) ... dpkg: libdb5.3:amd64: dependency problems, but removing anyway as you requested: libsvn1:amd64 depends on libdb5.3. libsasl2-modules-db:amd64 depends on libdb5.3. libpython3.12-stdlib:amd64 depends on libdb5.3. libpython2.7-stdlib:amd64 depends on libdb5.3. libperl5.38:amd64 depends on libdb5.3. libpam-modules:amd64 depends on libdb5.3. libjack-jackd2-0:amd64 depends on libdb5.3. libical3:amd64 depends on libdb5.3. libaprutil1:amd64 depends on libdb5.3. iproute2 depends on libdb5.3. dsniff depends on libdb5.3. apt-utils depends on libdb5.3.

(Reading database ... 404762 files and directories currently installed.) Removing libdb5.3:amd64 (5.3.28+dfsg2-4+b1) ... Selecting previously unselected package libdb5.3t64:amd64. (Reading database ... 404755 files and directories currently installed.) Preparing to unpack .../libdb5.3t64_5.3.28+dfsg2-7_amd64.deb ... Unpacking libdb5.3t64:amd64 (5.3.28+dfsg2-7) ... Setting up libdb5.3t64:amd64 (5.3.28+dfsg2-7) ... (Reading database ... 404761 files and directories currently installed.) Preparing to unpack .../readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) over (8.2-3) ... Setting up libexpat1:amd64 (2.6.2-1) ... Setting up libexpat1-dev:amd64 (2.6.2-1) ... Setting up libpython3.11-minimal:amd64 (3.11.9-1) ... Setting up readline-common (8.2-4) ... Setting up python3.11-minimal (3.11.9-1) ... Setting up libreadline8t64:amd64 (8.2-4) ... Setting up libpython3.11-stdlib:amd64 (3.11.9-1) ... Setting up libpython3.11t64:amd64 (3.11.9-1) ... Setting up libpython3.11-dev:amd64 (3.11.9-1) ... Setting up python3.11 (3.11.9-1) ... Setting up python3.11-dev (3.11.9-1) ... Processing triggers for systemd (255.3-2) ... Processing triggers for man-db (2.12.0-3) ... Processing triggers for mailcap (3.70+nmu1) ... Processing triggers for kali-menu (2023.4.7) ... Processing triggers for desktop-file-utils (0.27-1) ... Processing triggers for doc-base (0.11.2) ... Processing 1 changed doc-base file... Processing triggers for libc-bin (2.38-13) ... Requirement already satisfied: pillow in /usr/lib/python3/dist-packages (10.2.0) Collecting pillow Downloading pillow-10.4.0-cp311-cp311-manylinux_2_28_x86_64.whl.metadata (9.2 kB) Requirement already satisfied: twisted in /usr/lib/python3/dist-packages (23.10.0) Collecting twisted Downloading twisted-24.7.0-py3-none-any.whl.metadata (18 kB) Collecting pycrypto Using cached pycrypto-2.6.1.tar.gz (446 kB) Preparing metadata (setup.py) ... done Collecting pycryptodome Downloading pycryptodome-3.20.0-cp35-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (3.4 kB) Requirement already satisfied: attrs>=21.3.0 in /usr/lib/python3/dist-packages (from twisted) (23.2.0) Requirement already satisfied: automat>=0.8.0 in /usr/lib/python3/dist-packages (from twisted) (22.10.0) Requirement already satisfied: constantly>=15.1 in /usr/lib/python3/dist-packages (from twisted) (23.10.4) Requirement already satisfied: hyperlink>=17.1.1 in /usr/lib/python3/dist-packages (from twisted) (21.0.0) Collecting incremental>=24.7.0 (from twisted) Downloading incremental-24.7.2-py3-none-any.whl.metadata (8.1 kB) Requirement already satisfied: typing-extensions>=4.2.0 in /usr/lib/python3/dist-packages (from twisted) (4.9.0) Requirement already satisfied: zope-interface>=5 in /usr/lib/python3/dist-packages (from twisted) (6.1) Requirement already satisfied: setuptools>=61.0 in /usr/lib/python3/dist-packages (from incremental>=24.7.0->twisted) (68.1.2) Downloading pillow-10.4.0-cp311-cp311-manylinux_2_28_x86_64.whl (4.5 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.5/4.5 MB 118.0 kB/s eta 0:00:00 Downloading twisted-24.7.0-py3-none-any.whl (3.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 168.1 kB/s eta 0:00:00 Downloading pycryptodome-3.20.0-cp35-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (2.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.1/2.1 MB 263.8 kB/s eta 0:00:00 Downloading incremental-24.7.2-py3-none-any.whl (20 kB) Building wheels for collected packages: pycrypto Building wheel for pycrypto (setup.py) ... error error: subprocess-exited-with-error

× python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [71 lines of output] checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for __gmpz_init in -lgmp... yes checking for __gmpz_init in -lmpir... no checking whether mpz_powm is declared... yes checking whether mpz_powm_sec is declared... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for inttypes.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking for inline... inline checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for int8_t... yes checking for size_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for memmove... yes checking for memset... yes configure: creating ./config.status config.status: creating src/config.h In file included from /usr/include/python3.11/Python.h:87, from src/_fastmath.c:31: /usr/include/python3.11/cpython/pytime.h:208:60: warning: ‘struct timespec’ declared inside parameter list will not be visible outside of this definition or declaration 208 | PyAPI_FUNC(int) _PyTime_FromTimespec(_PyTime_t tp, struct timespec ts); | ^~~~ /usr/include/python3.11/cpython/pytime.h:213:56: warning: ‘struct timespec’ declared inside parameter list will not be visible outside of this definition or declaration 213 | PyAPI_FUNC(int) _PyTime_AsTimespec(_PyTime_t t, struct timespec ts); | ^~~~ /usr/include/python3.11/cpython/pytime.h:217:63: warning: ‘struct timespec’ declared inside parameter list will not be visible outside of this definition or declaration 217 | PyAPI_FUNC(void) _PyTime_AsTimespec_clamp(_PyTime_t t, struct timespec ts); | ^~~~ src/_fastmath.c:33:10: fatal error: longintrepr.h: No such file or directory 33 | #include / for conversions / | ^~~~~~~ compilation terminated. error: command '/usr/bin/x86_64-linux-gnu-gcc' failed with exit code 1 [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for pycrypto Running setup.py clean for pycrypto
Failed to build pycrypto ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (pycrypto)