No Booting after install

[severnside-droid]

I have installed Clear Linux ( I am dual booting) , I followed the instructions " Dual-boot Clear Linux OS with Any GRUB-based Linux Distro " and used Method 2: Use GRUB to Boot Clear Linux OS. On booting and selecting Clear Linux I get this " error’ EFI/org.clearlinux/bootloaderx64.efi’ not found "

[ahkok]

@dorileo can you check if the docs are correct here, or need updating? And maybe poke the docs team in case it needs updating

[bktan8]

@severnside-droid - What's the other Linux distro (and version) you're trying to dual-boot Clear Linux with? I want to see if I can reproduce the issue you're experiencing.

[severnside-droid]

The other Linux distro is MX 19.1

[bktan8]

@severnside-droid - I tested MX 19.1 with Clear 32340 using the instruction on https://docs.01.org/clearlinux/latest/tutorials/multi-boot/dual-boot-linux.html# and using Method #2 - Use GRUB to Boot Clear Linux OS.

It works without any issue.

Did you set the proper "root" UUID (based on the result of blkid) value for /etc/grub.d/40_custom?

[severnside-droid]

My last attempt at installing Clear Linux was by safe method on the remaining free space as previous attempts had failed. Please see output of /etc/grub.d , pointing to device sda/5 it should match with the disk in output attached

[bktan8]

I did a fresh installation of MX and telling the installer to "Auto-install using entire disk", with "Leave free space up to" and left enough space for Clear Linux (minimum of ~22GB). I told it to install GRUB and set location to "ESP". After MX was done, I installed Clear Linux using the "Safe installation" method. Then I add Clear to GRUB's boot menu per the instruction in the document. I didn't run into any issue.

Here's what my partitions look like:

$ sudo blkid /dev/sda1: UUID="5E05-D9C1" TYPE="vfat" PARTLABEL="ESP" PARTUUID="0d1ca6fb-7380-4bbb-9fa2-fcc4745c8afe" /dev/sda2: LABEL="rootMX19" UUID="58ccace6-faa1-4c2f-a0df-5dd009abd647" TYPE="ext4" PARTLABEL="primary" PARTUUID="8b1656ba-4c87-46b0-a29f-6db35fd36354" /dev/sda3: LABEL="swapMX" UUID="8edf0916-5ea0-48d3-9711-67cea5ba3448" TYPE="swap" PARTLABEL="primary" PARTUUID="3b8a1569-6489-4a95-8a1e-8198bc0b649c" /dev/sda4: LABEL_FATBOOT="boot" LABEL="boot" UUID="8826-15CA" TYPE="vfat" PARTLABEL="EFI" PARTUUID="da9f645a-ca3e-42bd-a4eb-7236b53bb02e" /dev/sda5: LABEL="root" UUID="081fb5b9-095a-4568-b413-777717882e29" TYPE="ext4" PARTLABEL="/" PARTUUID="44dfcf35-4ca2-43fc-9859-853baee13bfe" /dev/sdb1: LABEL_FATBOOT="U" LABEL="U" UUID="7B71-11FB" TYPE="vfat"

$ cat /etc/grub.d/40_custom

!/bin/sh

exec tail -n +3 $0 # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry 'Clear Linux OS' { search --fs-uuid --no-floppy --set=root 8826-15CA chainloader (${root})/EFI/org.clearlinux/bootloaderx64.efi }

$ sudo update-grub Generating grub configuration file ... Found theme: /boot/grub/themes/linen/theme.txt Found linux image: /boot/vmlinuz-4.19.0-6-amd64 Found initrd image: /boot/initrd.img-4.19.0-6-amd64 Found mtest-64.efi image: /boot/uefi-mt/mtest-64.efi Found Clear Linux OS on /dev/sda5 Adding boot menu entry for EFI firmware configuration done

Is doing a fresh installation of MX and then Clear an option for you? I see a lot of different partitions from your screenshot. Might be easier to start fresh, if possible.

[severnside-droid]

Thanks for all your help. Maybe in the future I will either put another disk in the system and just use it for Clear Linux.