Geotechnical Cone Penetration Testing Data Visualisation
Reference Book on CPT techniques and analysis: T. Lunne , J.J.M Powell, P.K. Robertson: Cone Penetration Testing in Geotechnical Practice Amazon Link
Three Python scripts have been created to perform the calculations and data visualisation based on the techniques provided by Lunne et al and according to Geotechnical industry practice (British Standard: BS EN ISO 22476-1:2012)
The Raw data is loaded into Python from .xls files, with four columns of data representing the required datasets. The first row of each of the columns saved within the excel files assumes a header with the standard AGS4 headers. 1) Test Depth (SCPT_DPTH). 2) Tip Resistance (SCPT_RES). 3) Cone Sleeve Friction (SCPT_FRES). 4) Measured Pore Pressure (U2 position, behind the tip) (SCPT_PWP2).
Calculations: This is performed within the calcs.py script. The user should satisfy themselves that the assumptions used for the calculations are repreentative of the ground conditions.
Graphing: The raw_grapher.py script has been setup to import the requried parameters for producing the standard tip resistance, sleeve friction and pore pressure plots. The resuting plots will be saved as a .png file within the specified root folder.
Soil Behaviour Type Index: The sbt_index.py script reads the calculated Ic - Soil Behavior Type Index arrays and plots the data with the representative descriptions based on the industry standard guidance and Lunne et al. Two plots are saved as a .png file within the specified root folder, illustrating the test trace as well as an interpreted soil column.