Open microhobby opened 9 months ago
Booting from sdcard with USR/BOOT button pressed gives the follow log:
U-Boot SPL 2023.04-g4750afef5b (Jan 01 1970 - 00:00:00 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)') SPL initial stack usage: 1856 bytes i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register Card did not respond to voltage select! : -110 ** Bad device specification mmc 1 ** Couldn't find partition mmc 1:1 Error: could not access storage. Trying to boot from MMC2 i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register Card did not respond to voltage select! : -110 spl: mmc init failed with error: -95 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###
this is a regression, I tested on the v6.3.0, and it's not reproducible
Booting from sdcard with USR/BOOT button pressed gives the follow log:
this is a regression, I tested on the v6.3.0, and it's not reproducible