v2ray,能运行，但不能通过GOOGLE检测

[panther706]

设备：WNDR4300 固件版本：OpenWrt R20.9.15 / LuCI Master (git-20.256.12360-1a54222)，10.3最新拉取源码 。 v2ray,显示运行中，但不能通过GOOGLE检测，不能上油管，换了几个机场确定不是机场问题。换成55R就正常使用。

[ 0.000000] Linux version 4.19.138 (pwh@pwh-machine) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r2899-9a482a15a)) #0 Thu Sep 24 02:01:24 2020 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) [ 0.000000] MIPS: machine is Netgear WNDR4300 [ 0.000000] SoC: Atheros AR9344 rev 2 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a4 with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 121972K/131072K available (4703K kernel code, 169K rwdata, 1076K rodata, 1212K init, 206K bss, 9100K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] CPU clock: 560.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns [ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns [ 0.008319] Calibrating delay loop... 278.78 BogoMIPS (lpj=557568) [ 0.050874] pid_max: default: 32768 minimum: 301 [ 0.056055] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.063114] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.076497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.086918] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.093579] pinctrl core: initialized pinctrl subsystem [ 0.099726] NET: Registered protocol family 16 [ 0.112187] GPIO line 18 (netgear:ext:lna0) hogged as output/high [ 0.118736] GPIO line 19 (netgear:ext:lna1) hogged as output/high [ 0.149060] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.161812] clocksource: Switched to clocksource MIPS [ 0.168489] NET: Registered protocol family 2 [ 0.174201] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.182471] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.189923] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.196716] TCP: Hash tables configured (established 1024 bind 1024) [ 0.203634] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.209911] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.216943] NET: Registered protocol family 1 [ 0.221678] PCI: CLS 0 bytes, default 32 [ 0.225398] Crashlog allocated RAM at address 0x3f00000 [ 0.232696] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.246846] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.253106] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.280328] io scheduler noop registered [ 0.284568] io scheduler deadline registered (default) [ 0.292940] pinctrl-single 1804002c.pinmux: 544 pins, size 68 [ 0.300182] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.307785] console [ttyS0] disabled [ 0.311685] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A [ 0.320891] console [ttyS0] enabled [ 0.328322] bootconsole [early0] disabled [ 0.345239] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1 [ 0.351749] nand: Micron NAND 128MiB 3,3V 8-bit [ 0.356373] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.364102] Scanning device for bad blocks [ 0.372224] random: fast init done [ 0.456464] 12 fixed-partitions partitions found on MTD device ar934x-nand [ 0.463468] Creating 12 MTD partitions on "ar934x-nand": [ 0.468886] 0x000000000000-0x000000040000 : "u-boot" [ 0.474892] 0x000000040000-0x000000080000 : "u-boot-env" [ 0.481246] 0x000000080000-0x0000000c0000 : "caldata" [ 0.487306] 0x0000000c0000-0x000000140000 : "pot" [ 0.493028] 0x000000140000-0x000000340000 : "language" [ 0.499175] 0x000000340000-0x0000003c0000 : "config" [ 0.505145] 0x0000003c0000-0x0000006c0000 : "traffic_meter" [ 0.511736] 0x0000006c0000-0x000000ac0000 : "kernel" [ 0.517734] 0x000000ac0000-0x000001fc0000 : "ubipart0" [ 0.523985] 0x0000006c0000-0x000001fc0000 : "firmware" [ 0.599122] 0x000001fc0000-0x000002000000 : "caldata_backup" [ 0.605876] 0x000002000000-0x000008000000 : "ubipart1" [ 0.612844] Concatenating MTD devices: [ 0.616724] (0): "ubipart0" [ 0.619574] (1): "ubipart1" [ 0.622421] into device "ubi-concat" [ 0.626097] 1 fixed-partitions partitions found on MTD device ubi-concat [ 0.632915] Creating 1 MTD partitions on "ubi-concat": [ 0.638152] 0x000000000000-0x000007500000 : "ubi" [ 0.645355] libphy: Fixed MDIO Bus: probed [ 0.971729] libphy: ag71xx_mdio: probed [ 0.978842] switch0: Atheros AR8327 rev. 4 switch registered on mdio.0 [ 1.563324] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] [ 1.574579] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii [ 1.584378] NET: Registered protocol family 10 [ 1.595927] Segment Routing with IPv6 [ 1.599857] NET: Registered protocol family 17 [ 1.604510] 8021q: 802.1Q VLAN Support v1.8 [ 1.612381] PCI host bridge /ahb/pcie-controller@180c0000 ranges: [ 1.618651] MEM 0x0000000010000000..0x0000000013ffffff [ 1.623981] IO 0x0000000000000000..0x0000000000000000 [ 1.629512] PCI host bridge to bus 0000:00 [ 1.633722] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] [ 1.640717] pci_bus 0000:00: root bus resource [io 0x0000] [ 1.646392] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 1.653300] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.661395] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000 [ 1.661458] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] [ 1.661515] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.661598] pci 0000:00:00.0: supports D1 [ 1.661609] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.663164] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.663199] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit] [ 1.670688] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref] [ 1.680147] UBI: auto-attach mtd12 [ 1.683681] ubi0: attaching mtd12 [ 2.604420] ubi0: scanning is finished [ 2.619924] ubi0: attached mtd12 (name "ubi", size 117 MiB) [ 2.625650] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.632660] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.639567] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.646647] ubi0: good PEBs: 936, bad PEBs: 0, corrupted PEBs: 0 [ 2.652753] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.660094] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1600912884 [ 2.669377] ubi0: available PEBs: 0, total reserved PEBs: 936, PEBs reserved for bad PEB handling: 19 [ 2.678829] ubi0: background thread "ubi_bgt0d" started, PID 358 [ 2.686512] block ubiblock0_0: created from ubi0:0(rootfs) [ 2.692155] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 2.704682] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.717935] Freeing unused kernel memory: 1212K [ 2.722558] This architecture does not have kernel memory protection. [ 2.729107] Run /sbin/init as init process [ 3.353273] init: Console is alive [ 3.357061] init: - watchdog - [ 5.295965] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 5.448993] usbcore: registered new interface driver usbfs [ 5.454734] usbcore: registered new interface driver hub [ 5.460267] usbcore: registered new device driver usb [ 5.484618] ANTFS Module: Version 07.19-b41ba529 [ 5.532835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.551017] SCSI subsystem initialized [ 5.561364] ehci-platform: EHCI generic platform driver [ 5.567004] ehci-platform 1b000000.usb: EHCI Host Controller [ 5.572836] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 5.580903] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000 [ 5.601837] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 5.609114] hub 1-0:1.0: USB hub found [ 5.613411] hub 1-0:1.0: 1 port detected [ 5.623272] usbcore: registered new interface driver usb-storage [ 5.632863] usbcore: registered new interface driver uas [ 5.638985] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 5.656857] init: - preinit - [ 5.665534] random: crng init done [ 8.605469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.611568] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready [ 9.623084] eth0: link up (1000Mbps/Full duplex) [ 9.627885] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.634707] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 12.945261] mount_root: loading kmods from internal overlay [ 13.022170] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 13.030817] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 13.116061] print_req_error: I/O error, dev mtdblock0, sector 48 [ 13.125173] print_req_error: I/O error, dev mtdblock0, sector 88 [ 13.410781] print_req_error: I/O error, dev mtdblock4, sector 88 [ 13.447478] print_req_error: I/O error, dev mtdblock4, sector 128 [ 13.453836] print_req_error: I/O error, dev mtdblock4, sector 128 [ 13.460032] Buffer I/O error on dev mtdblock4, logical block 16, async page read [ 13.737301] UBIFS (ubi0:1): default file-system created [ 13.743589] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 520 [ 13.890764] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 13.898765] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 13.908839] UBIFS (ubi0:1): FS size: 99803136 bytes (95 MiB, 786 LEBs), journal size 4952064 bytes (4 MiB, 39 LEBs) [ 13.919439] UBIFS (ubi0:1): reserved for root: 4713948 bytes (4603 KiB) [ 13.926175] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 088A0977-8A14-4B3E-9281-D08E0F62F9C6, small LPT model [ 13.938585] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 13.945959] block: unable to load configuration (fstab: Entry not found) [ 13.952925] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 13.959707] block: unable to load configuration (fstab: Entry not found) [ 13.966668] block: attempting to load /etc/config/fstab [ 13.974086] block: unable to load configuration (fstab: Entry not found) [ 13.981041] block: no usable configuration [ 13.988786] UBIFS (ubi0:1): un-mount UBI device 0 [ 13.993664] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops [ 14.005388] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 523 [ 14.153023] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 14.161028] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 14.171108] UBIFS (ubi0:1): FS size: 99803136 bytes (95 MiB, 786 LEBs), journal size 4952064 bytes (4 MiB, 39 LEBs) [ 14.181703] UBIFS (ubi0:1): reserved for root: 4713948 bytes (4603 KiB) [ 14.188433] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 088A0977-8A14-4B3E-9281-D08E0F62F9C6, small LPT model [ 14.219694] print_req_error: I/O error, dev mtdblock0, sector 48 [ 14.228812] print_req_error: I/O error, dev mtdblock0, sector 88 [ 14.415130] print_req_error: I/O error, dev mtdblock4, sector 88 [ 14.724569] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 14.731886] block: unable to load configuration (fstab: Entry not found) [ 14.738856] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 14.745933] block: unable to load configuration (fstab: Entry not found) [ 14.752895] block: attempting to load /etc/config/fstab [ 14.758410] block: unable to load configuration (fstab: Entry not found) [ 14.765355] block: no usable configuration [ 14.771452] mount_root: overlay filesystem has not been fully initialized yet [ 14.779275] mount_root: switching to ubifs overlay [ 14.853859] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off. [ 14.866953] urandom-seed: Seed file not found (/etc/urandom.seed) [ 14.969701] eth0: link down [ 14.996926] procd: - early - [ 15.000127] procd: - watchdog - [ 15.743905] procd: - watchdog - [ 15.747534] procd: - ubus - [ 16.154091] procd: - init - [ 17.865629] kmodloader: loading kernel modules from /etc/modules.d/ [ 17.975434] NET: Registered protocol family 38 [ 18.058043] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 18.372189] urngd: v1.0.2 started. [ 18.390086] cryptodev: driver 1.10 loaded. [ 18.427454] Mirror/redirect action on [ 18.557550] u32 classifier [ 18.560382] input device check on [ 18.564113] Actions configured [ 18.618385] Loading modules backported from Linux version v5.8-0-gbcf876870b95 [ 18.625771] Backport generated by backports.git v5.8-1-0-g79400d9e [ 18.961399] usbcore: registered new interface driver ums-alauda [ 18.980423] usbcore: registered new interface driver ums-cypress [ 19.000639] usbcore: registered new interface driver ums-datafab [ 19.020341] usbcore: registered new interface driver ums-freecom [ 19.036550] usbcore: registered new interface driver ums-isd200 [ 19.056766] usbcore: registered new interface driver ums-jumpshot [ 19.076358] usbcore: registered new interface driver ums-karma [ 19.093510] usbcore: registered new interface driver ums-sddr09 [ 19.116713] usbcore: registered new interface driver ums-sddr55 [ 19.133112] usbcore: registered new interface driver ums-usbat [ 19.207263] xt_time: kernel timezone is -0000 [ 19.446651] PPP generic driver version 2.4.2 [ 19.459939] PPP MPPE Compression module registered [ 19.475653] NET: Registered protocol family 24 [ 19.596356] ath9k 18100000.wmac: Direct firmware load for ath9k-eeprom-ahb-18100000.wmac.bin failed with error -2 [ 19.606836] ath9k 18100000.wmac: Falling back to syfs fallback for: ath9k-eeprom-ahb-18100000.wmac.bin [ 19.859696] ath: EEPROM regdomain sanitized [ 19.859709] ath: EEPROM regdomain: 0x64 [ 19.859714] ath: EEPROM indicates we should expect a direct regpair map [ 19.859739] ath: Country alpha2 being used: 00 [ 19.859743] ath: Regpair used: 0x64 [ 19.873488] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 19.875911] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12 [ 19.883096] ath9k 0000:00:00.0: enabling device (0000 -> 0002) [ 19.890112] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2 [ 19.900416] ath9k 0000:00:00.0: Falling back to syfs fallback for: ath9k-eeprom-pci-0000:00:00.0.bin [ 21.053033] ath: EEPROM regdomain sanitized [ 21.053046] ath: EEPROM regdomain: 0x64 [ 21.053051] ath: EEPROM indicates we should expect a direct regpair map [ 21.053075] ath: Country alpha2 being used: 00 [ 21.053079] ath: Regpair used: 0x64 [ 21.064879] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 21.067198] GPIO line 496 (netgear:power:usb) hogged as output/high [ 21.073982] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=16 [ 21.113621] kmodloader: done loading kernel modules from /etc/modules.d/* [ 64.256117] print_req_error: I/O error, dev mtdblock0, sector 48 [ 64.279644] print_req_error: I/O error, dev mtdblock0, sector 88 [ 64.508876] print_req_error: I/O error, dev mtdblock4, sector 88 [ 70.840877] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 70.864304] br-lan: port 1(eth0.1) entered blocking state [ 70.869871] br-lan: port 1(eth0.1) entered disabled state [ 70.875753] device eth0.1 entered promiscuous mode [ 70.880675] device eth0 entered promiscuous mode [ 70.908448] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 70.984021] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 71.863583] eth0: link up (1000Mbps/Full duplex) [ 71.905888] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 71.945962] br-lan: port 1(eth0.1) entered blocking state [ 71.951485] br-lan: port 1(eth0.1) entered forwarding state [ 71.957511] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 72.117887] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 76.319552] ath: EEPROM regdomain: 0x8348 [ 76.319561] ath: EEPROM indicates we should expect a country code [ 76.319570] ath: doing EEPROM country->regdmn map search [ 76.319579] ath: country maps to regdmn code: 0x3a [ 76.319586] ath: Country alpha2 being used: US [ 76.319590] ath: Regpair used: 0x3a [ 76.319597] ath: regdomain 0x8348 dynamically updated by user [ 76.319675] ath: EEPROM regdomain: 0x8348 [ 76.319679] ath: EEPROM indicates we should expect a country code [ 76.319687] ath: doing EEPROM country->regdmn map search [ 76.319695] ath: country maps to regdmn code: 0x3a [ 76.319699] ath: Country alpha2 being used: US [ 76.319703] ath: Regpair used: 0x3a [ 76.319709] ath: regdomain 0x8348 dynamically updated by user [ 77.077233] fast-classifier (PBR safe v2.1.4a): starting up [ 77.083170] fast-classifier: registered [ 79.388566] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 79.539272] br-lan: port 2(wlan1) entered blocking state [ 79.544750] br-lan: port 2(wlan1) entered disabled state [ 79.550553] device wlan1 entered promiscuous mode [ 79.660857] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 79.667591] br-lan: port 2(wlan1) entered blocking state [ 79.673038] br-lan: port 2(wlan1) entered forwarding state [ 79.822830] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 79.991002] br-lan: port 3(wlan0) entered blocking state [ 79.996509] br-lan: port 3(wlan0) entered disabled state [ 80.002325] device wlan0 entered promiscuous mode [ 80.007393] br-lan: port 3(wlan0) entered blocking state [ 80.012836] br-lan: port 3(wlan0) entered forwarding state [ 80.149970] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 361.572599] pppoe-wan: renamed from ppp0 [ 403.223947] device wlan0 left promiscuous mode [ 403.228703] br-lan: port 3(wlan0) entered disabled state [ 404.110792] device wlan1 left promiscuous mode [ 404.115567] br-lan: port 2(wlan1) entered disabled state [ 409.429214] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 409.489084] br-lan: port 2(wlan0) entered blocking state [ 409.494549] br-lan: port 2(wlan0) entered disabled state [ 409.500366] device wlan0 entered promiscuous mode [ 409.986029] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 409.992741] br-lan: port 2(wlan0) entered blocking state [ 409.998186] br-lan: port 2(wlan0) entered forwarding state [ 410.064285] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 410.107095] br-lan: port 3(wlan1) entered blocking state [ 410.112559] br-lan: port 3(wlan1) entered disabled state [ 410.118409] device wlan1 entered promiscuous mode [ 410.123390] br-lan: port 3(wlan1) entered blocking state [ 410.128845] br-lan: port 3(wlan1) entered forwarding state [ 410.181047] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready

[panther706]

[smallprogram]

刚刚编译，并没有发现你说的这种问题

[panther706]

刚刚编译，并没有发现你说的这种问题

可能软路由能用，MIPS平台支持不太友好。

[sevengod007]

检查你的v2ray版本，4.28遇到了你所说的问题，换成4.27问题解决

[panther706]

检查你的v2ray版本，4.28遇到了你所说的问题，换成4.27问题解决

具体怎么操作，我试试看

[sevengod007]

软件包搜索v2ray,确认版本是否为4.28，卸载‘’v2ray‘’,文件传输这里上传这个https://openwrt.download/R20.9.4/packages/x86_64/base/v2ray_4.27.5-1_x86_64.ipk 并安装试一试

[panther706]

软件包搜索v2ray,确认版本是否为4.28，卸载‘’v2ray‘’,文件传输这里上传这个https://openwrt.download/R20.9.4/packages/x86_64/base/v2ray_4.27.5-1_x86_64.ipk 并安装试一试

好的，谢了。但我不是软路由，这个IPK通用吗？

[sevengod007]

粗略搜索v2ray，确认版本是否为4.28，卸载“ v2ray”，文件传输此处上传这个https://openwrt.download/R20.9.4/packages/x86_64/base/v2ray_4.27.5-1_x86_64.ipk 并安装试一试

好的，谢了。但我不是软路由，这个IPK通用吗？

未知，你可以找到对应你设备的文件来安装或者重新拉取编译一下，最新的源码v2ray好像已经更新到了4.30。看楼上的截图4.30正常。这个链接里你看下能不能找到你需要的 https://openwrt.download/?dir=R20.9.4

[panther706]

软件包搜索v2ray,确认版本是否为4.28，卸载‘’v2ray‘’,文件传输这里上传这个https://openwrt.download/R20.9.4/packages/x86_64/base/v2ray_4.27.5-1_x86_64.ipk 并安装试一试

刚刚试了，安装出错，不同平台，不能用

[panther706]

真的是版本问题，v2ray降级到4.27.5，问题暂时解决