search

davesmeghead / visonic

Visonic Custom Component for integration with Home Assistant
Apache License 2.0
92 stars 20 forks source link

Update to 0.9.6.14, Stay in Standard Plus Mode and No X10 #132

Closed ldupont226 closed 3 months ago

ldupont226 commented 3 months ago

Update to 0.9.6.14, Stay in Standard Plus Mode, No X10

Hi Dave thanks for your work. Before with 0.8.5.2 version,everything was working perfectly First if I upgrade to new release (try all including 0.9.6.14) it create a new Panel Then I have deleted the previous panel an create a new one

Unable to go to in Powerlink Mode, it stay stay in Standard Plus Mode The integration get all sensor,But it does'nt get my X10 switchs (Home code K).

I'm running on virtual machine on Poxmox. I use a raspbeery with Ser2Net to connecte to my Pannel

Sorry for my poor english

home-assistant.log

Rel 0.9.6.14 config config_entry-visonic-01J4JM5VH2R5HGR09YBFK0XDJ9.json

Rel 0.8.5.2 config config_entry-visonic-Previous release.json

davesmeghead commented 3 months ago

Hi, Just a few questions for you, and your English is very good, much better than my foreign languages. I struggle with English :)

Sorry for you needing to delete and recreate the panel, it should automatically update.

When it gets to Standard Plus, as you have a PowerMax+ panel have you tried to manually enrol from your Alarm Panel menu

Looking at your settings you exclude X10 devices 1,2,3,4,7 and 9. The integration only finds a single X10 device (number 1), but as it's excluded then a switch is not created. How many X10 devices do you have?

ldupont226 commented 3 months ago

For X10 the rest of excluded then 9 devices, may be a hint, I really don't know, Powermax use by default the following House code Device 1 for a indoor siren, In my case my house code in Powermax is K (device K5,K6,K8,K10,K11,K12,K13,K14,K15) and indoor siren L1. I don't know if you do a scan or read the house code ?

For the Powerlink I have tried many times (min 10) to delete and re-enroll with only 1 Powerlink successful, but after recharge it lost it,
With the previsous version, I need to do that only one time , I can recharge and reboot without re-enroll

davesmeghead commented 3 months ago

Hi, I think I've fixed the X10 problem with a release I've just uploaded to Github (0.9.6.16).

If you can:

I can compare the sequence and timing of the messages between the integration and the panel.

ldupont226 commented 3 months ago

It is not necessary for me to reinstall version 0.8.5.2 because I run on Proxmox, Before doing an update I do a Snapshot. and if it does not work properly I do a roll back. And I am currently with version 0.8.5.2. So for this test I did a shutdown of my VM and restarted it. I did not do anything on the console because it was already enrolled. Thank you I will test 0.9.6.16 in 2.5 hours,

here my log file home-assistant.log

ldupont226 commented 3 months ago

With release 0.9.6.16 Wonderful X10 is working correctly Now for the Powerlink Time, operation and result: 20:11 Boot.........Alarm connected in Standard Plus and stay 20:18 On Visonic Panel GO installer mode and exit to reset.........Samething stay in Standard Plus 20:26 On Visonic Panel delete Powerlink and reinstall..............Connected in Powerlink Mode 20:32 Rechage VIsonic Integration ...............................Return in Standard Plus and stay Log of first Boot

home-assistant.log

20:46 Restart VM .........Alarm connected in Standard Plus and stay 20:54 On Visonic Panel GO installer mode and exit to reset.........Samething stay in Standard Plus 20:58 On Visonic Panel delete Powerlink and reinstall..............Connected in Powerlink Mode Log of second Boot home-assistant2.log

Alarm attribures at 20:40 Alarm attributes 2040.txt

davesmeghead commented 3 months ago

I woke up really early this morning to find you'd uploaded log files, thankyou I think I've spotted the problem and I've released 0.9.6.17 so please give it a try and let me know

davesmeghead commented 3 months ago

Oh forgot to ask, can you check the locations for the X10 devices are correct

ldupont226 commented 3 months ago

Hi Dave With release 0.9.6.17 Everythins is perfect, and the X10 locations are the same as in the panel. Powerlink mode in few seconds. Thank you so much

davesmeghead commented 3 months ago

Thanks for your help, for testing the X10 functionality so comprehensively and for providing all the log files. I'm going to close this issue but if there are further problems then create a new issue Thanks Dave