Open MarkOude opened 4 years ago
Hi,
could you pls send me your drawing diagram, or pls get me on skype : nandar.mtn
regards Nandar
On Thu, 1 Aug 2019, 21:43 MarkOude, notifications@github.com wrote:
Hello,
I have a 300W Solar Cell laying around and I want to use it wit yout MPPT-Design. The problem: it has about 40V maximum. Where is the 25V limit, I mean the mosfets can handle 55V...
Is the Problem D2 ( the MOSFET-Diver ), because it is directly conneted to the solarcell Voltage? A Solve would be to just use a LM2596 Buck converter and drive D2 with that voltage..
Or is it somewhere else?
Sorry for my (hopefully not so) bad English.
Gerne auch in Deutsch ;-)
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/deba168/MPPT_Master/issues/15?email_source=notifications&email_token=AFNZPESGBVHZRKTH4KTXITDQCLY7XA5CNFSM4IIRNOBKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HC27FRQ, or mute the thread https://github.com/notifications/unsubscribe-auth/AFNZPEQFOVI43W3VQUW5WWTQCLY7XANCNFSM4IIRNOBA .
Hi,
I thought of something like this...
I don't know if i could run this thing with that schematic on 40V or if something else would be damaged at this voltage level or if it would work flawlessly fine...
best regards Mark
Hi, This project is not fully functional. You can go through the comments section, for modification. You can ask your question there.
Regards Debasish
On Thu, Aug 1, 2019, 11:38 PM MarkOude notifications@github.com wrote:
[image: mppt controller_schema_with-LM2596] https://user-images.githubusercontent.com/9406959/62316138-211b2800-b497-11e9-8fbc-23da2e486011.png
Hi,
I thought of something like this...
I don't know if i could run this thing with that schematic on 40V or if something else would be damaged at this voltage level or if it would work flawlessly fine...
best regards Mark
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/deba168/MPPT_Master/issues/15?email_source=notifications&email_token=ABSRQPQK5RVCBAUOIKUBMOLQCMRARA5CNFSM4IIRNOBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD3LN3II#issuecomment-517397921, or mute the thread https://github.com/notifications/unsubscribe-auth/ABSRQPRSL7O4E32JJNJ5HQTQCMRARANCNFSM4IIRNOBA .
Hello,
I have a 300W Solar Cell laying around and I want to use it wit yout MPPT-Design. The problem: it has about 40V maximum. Where is the 25V limit, I mean the mosfets can handle 55V...
Is the Problem D2 ( the MOSFET-Diver ), because it is directly conneted to the solarcell Voltage? A Solve would be to just use a LM2596 Buck converter and drive D2 with that voltage..
Or is it somewhere else?
Sorry for my (hopefully not so) bad English.
Gerne auch in Deutsch ;-)