Roborock S5 Max no access via ssh

[Snupru]

I tried the FEL method on two robots, but after rebooting I can't get access via SSH.

Log via uart: `fes commit : fc3061df4dbd4153819b2d2f141d82b88fea51cf

beign to init dram DRAM DRIVE INFO: V1.7 DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM zq value: 00003bbbDRAM CLK =552 MHZ ID CHECK VERSION: V0.1 using ic R16 USE PLL DDR1 USE PLL NORMAL PLL FREQUENCE = 1104 MHZ DRAM PLL DDR1 frequency extend open ! DRAM master priority setting ok. Auto calculate timing parameter! para_dram_tpr0 = 0047214f para_dram_tpr1 = 01c2294b para_dram_tpr2 = 00061043 tcl = 6,tcwl = 4 DRAM TIMING PARA0 = 0b0e180b DRAM TIMING PARA1 = 0003040f DRAM TIMING PARA2 = 0406050a DRAM TIMING PARA3 = 0000400c DRAM TIMING PARA4 = 05020405 DRAM TIMING PARA5 = 05050403 DRAM TIMING PARA8 = 90003310 DRAM PHY INTERFACE PARA = 02040102 DRAM VTC is disable DRAM dynamic DQS/DQ ODT is on DRAM DQS gate is PD mode. DRAM one rank training is on,the value is 91003587 DRAM work mode register value = 004318d4 DRAM SIZE =256 M set one rank ODTMAP DRAM simple test OK. init dram ok`

and after the sunxi-fel exe 0x4a000000 command https://pastebin.com/aUzJeJVN

[Snupru]

Now it works, but only with the "roborock_restore_fel" files from the Telegram group