search

dzurikmiroslav / esp32-evse

ESP32 EVSE firmware
GNU General Public License v3.0
56 stars 21 forks source link

Flashing problem... #51

Open dariusz737 opened 2 months ago

dariusz737 commented 2 months ago

Hello. Great project. But I have a problem to flash DevKIt from esp32s2-evse.bin. Everything seems to be ok, no error on flashing. But after I have such error in logs. Does it matter that my board is different from one on GitHub? Obrazek att UQuX4cS8CXDEQ038XJZ_9qzgrmriPe74SgEMuN86spc (1)

dzurikmiroslav commented 2 months ago

Hi, are you sure you have ESP32-S2? That devkit looks like an ESP32... If you did not compile the project and only flash the compiled binary, did you also make the necessary partitions and config file? To begin, I would recommend building the project from sources and flashing it directly through the IDE.

dariusz737 commented 2 months ago

Hello

Thank you for answer. I was using flasher from EspHome, maybe that’s the reason for error. Now I am outside home, tomorrow will be back and will try to flash with ESP app from bin file. Flashing from sources requires to install half of internet resources and two days working on my MacBook :D (for someone not fluent in this). But maybe there will be no other choice.

Bert regards Dariusz Kulik

Wiadomość napisana przez Miroslav Dzúrik @.***> w dniu 25.04.2024, o godz. 21:45:

Hi, are you sure you have ESP32-S2? That devkit looks like an ESP32... If you did not compile the project and only flash the compiled binary, did you also make the necessary partitions and config file? To begin, I would recommend building the project from sources and flashing it directly through the IDE.

— Reply to this email directly, view it on GitHub https://github.com/dzurikmiroslav/esp32-evse/issues/51#issuecomment-2078052745, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATKMLJEK42BCQIQZROPGZOLY7FMMRAVCNFSM6AAAAABGYEZLB2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZYGA2TENZUGU. You are receiving this because you authored the thread.

dariusz737 commented 2 weeks ago

Hello

Is it possible to flash esp32-evse.bin with this tool - https://esp.huhn.me/

Best regrads Dariusz Kulik

https://github.com/dzurikmiroslav/esp32-evse/releases/download/v0.7.0/esp32-evse.binWiadomość napisana przez Miroslav Dzúrik @.***> w dniu 25.04.2024, o godz. 21:45:

Hi, are you sure you have ESP32-S2? That devkit looks like an ESP32... If you did not compile the project and only flash the compiled binary, did you also make the necessary partitions and config file? To begin, I would recommend building the project from sources and flashing it directly through the IDE.

— Reply to this email directly, view it on GitHub https://github.com/dzurikmiroslav/esp32-evse/issues/51#issuecomment-2078052745, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATKMLJEK42BCQIQZROPGZOLY7FMMRAVCNFSM6AAAAABGYEZLB2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZYGA2TENZUGU. You are receiving this because you authored the thread.