I notice that the display show a tension which increase proportionally with the power consumption of the motor.
For example, going without pedaling : 48v
If the motor is about 300w : +1.V : 49v
If the motor is about 600w : +2v = 50v
Full power 730w : +2.5v = 50.5V.
I stop pedaling, the tension decrease to return to 48v.
With the original firmware, this was inverted : The tension decrease with power consumption.
Configuration : TSDZ2B 750W 48V
Regards
Hi, Thanks for your OSF.
I notice that the display show a tension which increase proportionally with the power consumption of the motor. For example, going without pedaling : 48v If the motor is about 300w : +1.V : 49v If the motor is about 600w : +2v = 50v Full power 730w : +2.5v = 50.5V. I stop pedaling, the tension decrease to return to 48v.
With the original firmware, this was inverted : The tension decrease with power consumption. Configuration : TSDZ2B 750W 48V Regards