search

fbelavenuto / arpl

Automated Redpill Loader
GNU General Public License v3.0
7.24k stars 1.57k forks source link

Power On By PCI-E (wake on lan asus) #226

Open BloodRain13 opened 2 years ago

BloodRain13 commented 2 years ago

When the 'Power On By PCI-E' (wake on lan asus) function is enabled in the bios of the ROG STRIX B460-GAMING board , when I turn off DSM_DS920+_42962, the system shuts down and starts itself again after 2-4 seconds. If i turn off 'Power On By PCI-E' in the bios, then the system shutdown is normal. I really need a job WELL please help me figure this out.

sisland commented 2 years ago

Hi there

maybe some other device is sending a broadcast message that makes your device Boot Up? It happened to me before and has nothing to do with Loader or anything else.

Please, if you have more LAN devices disconnet all of them while you are testing this and let us know

BloodRain13 commented 2 years ago

After sending the shutdown command, I took out the LAN cable directly from xpenology. it didn't help, it turned on again. before that, there was a jun dsm 6.2 loader.... there were no such problems. I also tried TrueNAS recently, there shutdown works as expected, but by itself The TrueNAS system is very complicated for me.

BloodRain13 commented 2 years ago

My problem may be related to the fact that I use the original SN and MAC from synology ds 920+?

sisland commented 2 years ago

Yes. As far as I know you don't need the SN and MAC from another device to run. Only for quick connect and I highly discourage doing so. (You have tailscale to NOT expose your NAS from internet)

chestor37 commented 2 years ago

Yes. As far as I know you don't need the SN and MAC from another device to run. Only for quick connect and I highly discourage doing so. (You have tailscale to NOT expose your NAS from internet)

Why not use real sn and mac for xpenology?