search

fritzing / fritzing-app

Fritzing desktop application
http://fritzing.org
Other
3.97k stars 826 forks source link

Screw terminals with symetric silkscreen #2394

Open davidperrenoud opened 10 years ago

davidperrenoud commented 10 years ago

From stefanhermann79@googlemail.com on January 20, 2013 10:44:33

It would be nice, to provice this footprints, too. http://fritzing.org/forum/thread/1332/#post6270

Original issue: http://code.google.com/p/fritzing/issues/detail?id=2395

davidperrenoud commented 10 years ago

From irasc...@gmail.com on January 20, 2013 08:43:04

These are generated parts, so you would have to provide a model svg which I could use as a template for generating.

Cc: irasc...@gmail.com
Labels: -Type-Defect Type-Enhancement

davidperrenoud commented 10 years ago

From bluearc....@gmail.com on August 28, 2013 04:45:13

make a pcb-footprint for screwtreminals with middle aligned soldering-holes. have to decide how we bring this footprint into fritzing as an option for the 3,5mm screwterminal.

svg commit: r33b97064d51f

Attachment: screwterminal-3.5mm_middle_pcb.svg

failiz commented 3 years ago

Still an issue in 0.9.6. These scre connectors comes in two ways, with the pins centered or offset. Fritzing currently only implements the offset ones. From the forum: "This is the Fritzing core part as a 2 pole 3.5mm pitch, notice that the depth is about 5.8mm or so, notice that the pins are offset towards the back. The ones I have on hand, which are the most common (or at least, cheapest) variety out of china (sold on ebay etc) are these, notice the depth is 6.8, and the pins are on the midline, spaced evenly from front and back." I think both of them are used, so a checknbox could be added to implement these centered screw terminals. Remove imported label, add parts label