TROJAN问题 Xiaomi Mi Router CR660x

[rshi0212]

一直用主服务器VMESS和Netflix 分流服务器SSR，没有问题。 因为机场更新协议，VMESS取消改为TROJAN，新增加编译了TROJAN支持后，主服务器TROJAN和Netflix 分流服务器SSR，路由器就陷入无限重启，CPU占用率和系统负载非常高。

[1715173329]

日志。

[zusterben]

内存爆了，改用xray跑就好了

[rshi0212]

日志。

[ 0.000000] Linux version 5.4.175 (rshi0212@GPDWIN3-RSHI) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r4015-0be42d529)) #0 SMP Wed Feb 2 08:47:59 2022 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is Xiaomi Mi Router CR660x [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 14 pages/cpu s26992 r8192 d22160 u57344 [ 0.000000] pcpu-alloc: s26992 r8192 d22160 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00036014 [ 0.000000] Readback ErrCtl register=00036014 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 250104K/262144K available (6166K kernel code, 256K rwdata, 1296K rodata, 1292K init, 238K bss, 12040K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x36c/0x584 with crng_init=0 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns [ 0.007805] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.073975] pid_max: default: 32768 minimum: 301 [ 0.078773] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.085973] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.096526] rcu: Hierarchical SRCU implementation. [ 0.101876] smp: Bringing up secondary CPUs ... [ 3.255430] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 3.255439] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 3.255452] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 3.255559] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.166671] Synchronize counters for CPU 1: done. [ 3.348755] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 3.348763] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 3.348772] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 3.348828] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.257429] Synchronize counters for CPU 2: done. [ 3.436108] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 3.436117] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 3.436125] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 3.436192] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.342613] Synchronize counters for CPU 3: done. [ 0.372482] smp: Brought up 1 node, 4 CPUs [ 0.380862] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.390656] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.397667] pinctrl core: initialized pinctrl subsystem [ 0.404451] NET: Registered protocol family 16 [ 0.421521] FPU Affinity set after 11720 emulations [ 0.440007] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.451217] clocksource: Switched to clocksource GIC [ 0.457640] thermal_sys: Registered thermal governor 'step_wise' [ 0.458162] NET: Registered protocol family 2 [ 0.468584] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.476552] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.484862] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.492452] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.499526] TCP: Hash tables configured (established 2048 bind 2048) [ 0.505971] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.512464] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.519602] NET: Registered protocol family 1 [ 0.523919] PCI: CLS 0 bytes, default 32 [ 0.761151] 4 CPUs re-calibrate udelay(lpj = 2924544) [ 0.767889] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.775495] random: fast init done [ 0.788851] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.794625] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.807512] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.813453] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.819197] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.825663] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.833398] printk: console [ttyS0] disabled [ 0.837660] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 0.846649] printk: console [ttyS0] enabled [ 0.854903] printk: bootconsole [early0] disabled [ 0.866609] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388 [ 0.874253] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1 [ 0.880573] nand: ESMT PSU1GA30DT [ 0.883894] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.891446] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits [ 0.897973] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134 [ 0.905268] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134 [ 0.912556] Scanning device for bad blocks [ 2.888242] 8 fixed-partitions partitions found on MTD device mt7621-nand [ 2.895014] Creating 8 MTD partitions on "mt7621-nand": [ 2.900221] 0x000000000000-0x000000080000 : "Bootloader" [ 2.906738] 0x000000080000-0x0000000c0000 : "Nvram" [ 2.912707] 0x0000000c0000-0x000000100000 : "Bdata" [ 2.918625] 0x000000100000-0x000000180000 : "Factory" [ 2.924842] 0x000000180000-0x0000001c0000 : "crash" [ 2.930785] 0x0000001c0000-0x000000200000 : "crash_log" [ 2.937157] 0x000000200000-0x000000600000 : "kernel" [ 2.943294] 0x000000600000-0x000007f80000 : "ubi" [ 2.991906] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 3.002114] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22 [ 3.013046] mt7621-pci 1e140000.pcie: Parsing DT failed [ 3.020927] NET: Registered protocol family 10 [ 3.026840] Segment Routing with IPv6 [ 3.030592] NET: Registered protocol family 17 [ 3.035386] 8021q: 802.1Q VLAN Support v1.8 [ 3.043305] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 3.058924] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] [ 3.068696] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] [ 3.078597] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 3.088579] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] [ 3.098315] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode [ 3.109535] DSA: tree 0 setup [ 3.112843] rt2880-pinmux pinctrl: pcie is already enabled [ 3.118455] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 3.126044] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 3.233437] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 3.239002] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 3.344484] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 3.351436] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 3.356290] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 3.361151] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 3.370601] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 3.376958] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 3.383818] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 3.390662] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.396180] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 3.402207] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 3.408450] pci 0000:00:00.0: reg 0x14: [mem 0x60600000-0x6060ffff] [ 3.414777] pci 0000:00:00.0: supports D1 [ 3.418770] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.424866] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 3.430872] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 3.437140] pci 0000:00:01.0: reg 0x14: [mem 0x60610000-0x6061ffff] [ 3.443454] pci 0000:00:01.0: supports D1 [ 3.447445] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 3.454722] pci 0000:01:00.0: [14c3:7916] type 00 class 0x000280 [ 3.460769] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] [ 3.467994] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] [ 3.475221] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] [ 3.482546] pci 0000:01:00.0: supports D1 D2 [ 3.486796] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.493442] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 3.508556] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.513790] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 3.519858] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 3.526629] pci 0000:00:00.0: bridge window [mem 0x60100000-0x602fffff pref] [ 3.533843] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.540662] pci 0000:02:00.0: [14c3:7915] type 00 class 0x000280 [ 3.546720] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] [ 3.553952] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] [ 3.561181] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] [ 3.568493] pci 0000:02:00.0: supports D1 D2 [ 3.572760] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.579379] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 3.594508] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 3.599719] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 3.605803] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff] [ 3.612582] pci 0000:00:01.0: bridge window [mem 0x60400000-0x605fffff pref] [ 3.619776] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.626426] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 3.633030] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 3.639963] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 3.646558] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 3.653510] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 3.660270] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x602fffff pref] [ 3.667473] pci 0000:00:01.0: BAR 8: assigned [mem 0x60300000-0x603fffff] [ 3.674254] pci 0000:00:01.0: BAR 9: assigned [mem 0x60400000-0x605fffff pref] [ 3.681460] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff] [ 3.688223] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff] [ 3.695003] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 3.701777] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] [ 3.708543] pci 0000:01:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit pref] [ 3.716283] pci 0000:01:00.0: BAR 2: assigned [mem 0x60200000-0x60203fff 64bit pref] [ 3.724020] pci 0000:01:00.0: BAR 4: assigned [mem 0x60204000-0x60204fff 64bit pref] [ 3.731760] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.736704] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 3.743475] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 3.750232] pci 0000:00:00.0: bridge window [mem 0x60100000-0x602fffff pref] [ 3.757456] pci 0000:02:00.0: BAR 0: assigned [mem 0x60400000-0x604fffff 64bit pref] [ 3.765193] pci 0000:02:00.0: BAR 2: assigned [mem 0x60500000-0x60503fff 64bit pref] [ 3.772935] pci 0000:02:00.0: BAR 4: assigned [mem 0x60504000-0x60504fff 64bit pref] [ 3.780653] pci 0000:00:01.0: PCI bridge to [bus 02] [ 3.785608] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] [ 3.792385] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff] [ 3.799142] pci 0000:00:01.0: bridge window [mem 0x60400000-0x605fffff pref] [ 3.806929] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off [ 3.808077] UBI: auto-attach mtd7 [ 3.817164] ubi0: attaching mtd7 [ 5.071463] ubi0: scanning is finished [ 5.092862] ubi0: attached mtd7 (name "ubi", size 121 MiB) [ 5.098336] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.105202] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.111969] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.118895] ubi0: good PEBs: 972, bad PEBs: 0, corrupted PEBs: 0 [ 5.124882] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 5.132084] ubi0: max/mean erase counter: 8/5, WL threshold: 4096, image sequence number: 1640191224 [ 5.141185] ubi0: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 20 [ 5.150395] ubi0: background thread "ubi_bgt0d" started, PID 456 [ 5.154791] block ubiblock0_0: created from ubi0:0(rootfs) [ 5.161886] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 5.168827] hctosys: unable to open rtc device (rtc0) [ 5.183299] VFS: Mounted root (squashfs filesystem) readonly on device 259:0. [ 5.194966] Freeing unused kernel memory: 1292K [ 5.199491] This architecture does not have kernel memory protection. [ 5.205922] Run /sbin/init as init process [ 6.491735] init: Console is alive [ 6.495509] init: - watchdog - [ 7.825393] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 8.184500] Key type encrypted registered [ 8.198215] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 8.211632] init: - preinit - [ 11.294755] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 11.303065] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 11.311547] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.169245] random: jshn: uninitialized urandom read (4 bytes read) [ 12.245980] random: jshn: uninitialized urandom read (4 bytes read) [ 12.290393] random: jshn: uninitialized urandom read (4 bytes read) [ 15.650886] mount_root: loading kmods from internal overlay [ 15.695709] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 15.704963] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 16.420820] block: attempting to load /etc/config/fstab [ 16.429835] block: unable to load configuration (fstab: Entry not found) [ 16.436763] block: no usable configuration [ 16.444218] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 16.450110] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 584 [ 16.533281] UBIFS (ubi0:1): recovery needed [ 16.717295] UBIFS (ubi0:1): recovery completed [ 16.721891] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 16.729685] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 16.739566] UBIFS (ubi0:1): FS size: 93835264 bytes (89 MiB, 739 LEBs), journal size 4698112 bytes (4 MiB, 37 LEBs) [ 16.749962] UBIFS (ubi0:1): reserved for root: 4432071 bytes (4328 KiB) [ 16.756561] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 8E35AD47-2EC5-4B2A-B92F-51489B624812, small LPT model [ 16.775011] mount_root: loading kmods from internal overlay [ 16.815496] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 16.827041] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 17.156395] block: attempting to load /etc/config/fstab [ 17.161908] block: unable to load configuration (fstab: Entry not found) [ 17.168727] block: no usable configuration [ 17.177902] mount_root: switching to ubifs overlay [ 17.199638] urandom-seed: Seeding with /etc/urandom.seed [ 17.253531] procd: - early - [ 17.256649] procd: - watchdog - [ 17.931410] procd: - watchdog - [ 17.944701] procd: - ubus - [ 18.272976] procd: - init - [ 20.333859] kmodloader: loading kernel modules from /etc/modules.d/ [ 20.432311] NET: Registered protocol family 38 [ 20.456053] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 20.475147] Key type dns_resolver registered [ 20.495915] RPC: Registered named UNIX socket transport module. [ 20.501876] RPC: Registered udp transport module. [ 20.506569] RPC: Registered tcp transport module. [ 20.511279] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 20.525687] tun: Universal TUN/TAP device driver, 1.6 [ 20.546231] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 20.580306] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 20.597629] NFS: Registering the id_resolver key type [ 20.602739] Key type id_resolver registered [ 20.606917] Key type id_legacy registered [ 20.689352] cryptodev: driver 1.12 loaded. [ 20.703555] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff [ 20.711104] Backport generated by backports.git v5.10.42-1-0-gbee5c545 [ 20.722407] mtk-eip93 1e004000.crypto: PRNG initialized [ 20.733284] mtk-eip93 1e004000.crypto: EIP93 initialized succesfull [ 20.926358] xt_time: kernel timezone is -0000 [ 21.102302] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=24 [ 21.107792] pci 0000:00:00.0: enabling device (0006 -> 0007) [ 21.113553] mt7915e_hif 0000:01:00.0: enabling device (0000 -> 0002) [ 21.121164] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=25 [ 21.126770] pci 0000:00:01.0: enabling device (0006 -> 0007) [ 21.132520] mt7915e 0000:02:00.0: enabling device (0000 -> 0002) [ 21.370077] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20201105222230a [ 21.370077] [ 21.900649] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20201105222304 [ 21.939944] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323 [ 22.073461] PPP generic driver version 2.4.2 [ 22.079744] PPP MPPE Compression module registered [ 22.086319] NET: Registered protocol family 24 [ 22.099363] batman_adv: B.A.T.M.A.N. advanced 2021.4-openwrt-1 (compatibility version 15) loaded [ 22.113472] kmodloader: done loading kernel modules from /etc/modules.d/ [ 22.600335] crng init done [ 22.603080] random: 7 urandom warning(s) missed due to ratelimiting [ 34.075339] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 34.091291] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 34.099512] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 34.103675] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 34.115106] 8021q: adding VLAN 0 to HW filter on device lan1 [ 34.124182] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.131934] br-lan: port 1(lan1) entered blocking state [ 34.137205] br-lan: port 1(lan1) entered disabled state [ 34.143712] device lan1 entered promiscuous mode [ 34.148341] device eth0 entered promiscuous mode [ 34.182129] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode [ 34.190552] 8021q: adding VLAN 0 to HW filter on device lan2 [ 34.200152] br-lan: port 2(lan2) entered blocking state [ 34.205570] br-lan: port 2(lan2) entered disabled state [ 34.212732] device lan2 entered promiscuous mode [ 34.230880] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode [ 34.238183] 8021q: adding VLAN 0 to HW filter on device lan3 [ 34.247961] br-lan: port 3(lan3) entered blocking state [ 34.253297] br-lan: port 3(lan3) entered disabled state [ 34.259908] device lan3 entered promiscuous mode [ 34.283895] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode [ 34.291107] 8021q: adding VLAN 0 to HW filter on device wan [ 37.481874] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off [ 37.489269] br-lan: port 1(lan1) entered blocking state [ 37.494600] br-lan: port 1(lan1) entered forwarding state [ 37.502719] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 38.692360] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.699812] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready [ 39.490885] br-lan: port 4(wlan0) entered blocking state [ 39.496308] br-lan: port 4(wlan0) entered disabled state [ 39.502494] device wlan0 entered promiscuous mode [ 39.507652] br-lan: port 4(wlan0) entered blocking state [ 39.513098] br-lan: port 4(wlan0) entered forwarding state [ 40.122953] br-lan: port 4(wlan0) entered disabled state [ 40.132957] br-lan: port 5(wlan1) entered blocking state [ 40.138307] br-lan: port 5(wlan1) entered disabled state [ 40.144595] device wlan1 entered promiscuous mode [ 40.739586] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 40.746592] br-lan: port 5(wlan1) entered blocking state [ 40.752028] br-lan: port 5(wlan1) entered forwarding state [ 41.282241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 41.289167] br-lan: port 4(wlan0) entered blocking state [ 41.294615] br-lan: port 4(wlan0) entered forwarding state [ 49.649829] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.652615] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.674862] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.695039] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.730788] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.786865] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.787121] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.837730] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 49.944574] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-blowfish, throttling... [ 50.037620] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish)-all, throttling... [ 54.665228] request_module: 75 callbacks suppressed [ 54.665244] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384-all, throttling... [ 54.745128] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384, throttling... [ 54.787643] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384-all, throttling... [ 54.830535] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384-all, throttling... [ 54.857610] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384-all, throttling... [ 55.329157] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384, throttling... [ 55.379004] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384, throttling... [ 55.398482] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384-all, throttling... [ 55.425442] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-rmd160-all, throttling... [ 55.450268] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384-all, throttling... [ 57.001400] request_module: modprobe crypto-rmd160 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 57.013019] request_module: modprobe crypto-rmd160 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 57.024898] request_module: modprobe crypto-rmd160 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 58.686045] request_module: modprobe crypto-rmd160-all cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 59.215370] request_module: modprobe crypto-sha384 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 59.282334] request_module: modprobe crypto-sha384 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 59.451353] request_module: modprobe crypto-sha384 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 59.557185] request_module: modprobe crypto-rmd160 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 59.830673] __request_module: 100 callbacks suppressed [ 59.830693] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 59.854051] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512, throttling... [ 59.871368] request_module: modprobe crypto-sha384-all cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 59.891014] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512, throttling... [ 59.922617] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512, throttling... [ 59.941441] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha384-all, throttling... [ 60.015550] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512-all, throttling... [ 60.053178] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 60.063797] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-cbc(blowfish), throttling... [ 60.086155] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-rmd160-all, throttling... [ 60.099003] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512, throttling... [ 60.571363] request_module: modprobe crypto-sha384-all cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 62.331334] request_module: 6 callbacks suppressed [ 62.331349] request_module: modprobe crypto-sha512-all cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 62.749369] request_module: modprobe crypto-sha512-all cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 63.791355] request_module: modprobe crypto-cbc(blowfish)-all cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 64.221132] request_module: modprobe crypto-sha512 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 65.874808] __request_module: 71 callbacks suppressed [ 65.874826] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512, throttling... [ 65.988501] request_module: modprobe crypto-sha512 cannot be processed, kmod busy with 50 threads for more than 5 seconds now [ 65.999826] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512-all, throttling... [ 66.021623] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-sha512-all, throttling... [ 66.169329] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-rmd160-all, throttling... [ 67.237626] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-rmd160, throttling... [ 67.250001] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-rmd160, throttling... [ 67.262858] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-rmd160, throttling... [ 67.275112] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-rmd160, throttling... [ 67.551369] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module crypto-blowfish, throttling...

[rshi0212]

一旦切换到TORJAN后CPU使用率70以上，平均负载40多，不一会就自动重启，然后陷入无限重启。 在刚刚重启后，抓紧切换到SSR或者VMESS后，才可以正常使用。

[jxph1123]

只编译xray就可以了，VLESS、XTLS、SS、trojan都支持，多好。。SSR单独加上就行，我就只编译了SSR和xray，目前的主流都有了。

[rshi0212]

只编译xray，trojan的订阅刷新不出来

jxph1123 @.***> 于2022年2月7日周一 10:32写道：

只编译xray就可以了，VLESS、XTLS、SS、trojan都支持，多好。。

— Reply to this email directly, view it on GitHub https://github.com/fw876/helloworld/issues/778#issuecomment-1031013925, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOWOJCA4Q5ICYC4VZ2WNZQTUZ4VKJANCNFSM5MZX7XYA . You are receiving this because you authored the thread.Message ID: @.***>

[rshi0212]

只编译xray，无法启动trojan。 2022-02-07 17:19:10: -----------end------------ 2022-02-07 17:19:10: 找不到 trojan，无法启动... 2022-02-07 17:19:09: ----------start------------ 2022-02-07 17:19:09: boot！

Richard Shek @.***> 于2022年2月7日周一 15:35写道：

只编译xray，trojan的订阅刷新不出来

jxph1123 @.***> 于2022年2月7日周一 10:32写道：

只编译xray就可以了，VLESS、XTLS、SS、trojan都支持，多好。。

— Reply to this email directly, view it on GitHub https://github.com/fw876/helloworld/issues/778#issuecomment-1031013925, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOWOJCA4Q5ICYC4VZ2WNZQTUZ4VKJANCNFSM5MZX7XYA . You are receiving this because you authored the thread.Message ID: @.***>

[jxph1123]

我这没问题，你是否编译的问题呢。

[rshi0212]

passwall编译进去好用 ssrp还是一样问题 openclash编译进去也好用

发自我的iPhone

在 2022年2月7日，19:34，jxph1123 @.***> 写道： 

我这没问题，你是否编译的问题呢。

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[martin0607]

用Xray就好了，Trijan订阅也没问题