search

g4klx / MMDVMHost

The host program for the MMDVM
GNU General Public License v2.0
378 stars 275 forks source link

CW ID does not TX with CTCSSTone #810

Open m0llc opened 5 months ago

m0llc commented 5 months ago

Hi, I have noticed CW ID does not TX with CTCSSTone. I get a silent TX when using Tone Squelch... OR am I missing something ?

g4klx commented 5 months ago

This is by design, and follows ETCC recommendations to only transmit CTCSS when actually relaying traffic.

m0llc commented 5 months ago

Hi, Thanks for that. IT just TX's a Blank Carrier though when using SQTone. Also With my setup. I use a Yaesu DR2 Repeater with a MMDVM FM/DIgital Board into 2 Moto Radios and it doesnt TX the callsign. Having the DR2 TX the callsign will TX over the whole of the other connected repeaters. Do you have a little work around for it ?

Lee M0LLC

------ Original Message ------ From "Jonathan Naylor" @.> To "g4klx/MMDVMHost" @.> Cc "m0llc" @.>; "Author" @.> Date 28/05/2024 16:50:07 Subject Re: [g4klx/MMDVMHost] CW ID does not TX with CTCSSTone (Issue

810)

This is by design, and follows ETCC recommendations to only transmit CTCSS when actually relaying traffic.

— Reply to this email directly, view it on GitHub https://github.com/g4klx/MMDVMHost/issues/810#issuecomment-2135587318, or unsubscribe https://github.com/notifications/unsubscribe-auth/BARMVEDLB5RS4UUJ7QJDTZLZESRS7AVCNFSM6AAAAABIMNXKNWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZVGU4DOMZRHA. You are receiving this because you authored the thread.Message ID: @.***>