search

gioblu / PJON

PJON (Padded Jittering Operative Network) is an experimental, arduino-compatible, multi-master, multi-media network protocol.
Other
2.73k stars 239 forks source link

Implement strategy which supports AT commands for radios like Reyax RYLR896 and similar #333

Open rebel2234 opened 4 years ago

rebel2234 commented 4 years ago

Would it be possible to implement some methods that would allow communications to take place with the use of AT commands over serial, SPI, etc. etc. In modules such as the Reyax RYLR405, RYLR406, RYLR895 and RYLR896. Maybe the methods could be written in such a way that they are not specific to these modules but could also work with other devices that use AT commands such as RockBLOCK MK2 Iridium Satellite module.

gioblu commented 4 years ago

Ciao @rebel2234 sorry for the delay. Yes a strategy for that hardware that makes use of AT commands would be really cool, and enlarge our operational envelope.

I am now in Milan, all is paralized because of the coronavirus outbreak, so I am not sure how much time the test units will take to reach me here.

If you are interested in trying to develop the strategy I can support you here or directly on gitter: https://gitter.im/gioblu/PJON

gioblu commented 4 years ago

Ciao @rebel2234 arrived the modules, I will tomorrow start to work out the support. Thank you for rising this :)

rebel2234 commented 4 years ago

@gioblu How's it coming along? Sorry I can't be of much help as I am not very good at programming.

gioblu commented 4 years ago

Ciao @rebel2234 sorry for the late response, I am not sure why but the 2 modules I have received seems totally unresponsive, do you know if the modules need to be flashed with the firmware or there is something i am missing?

rebel2234 commented 4 years ago

They should work out of the box. You will have to use AT commands to set parameters (bandwidth, coding rates, etc.)

AT command guide can be found here. https://www.google.com/url?sa=t&source=web&rct=j&url=http://reyax.com/wp-content/uploads/2018/01/REYAX-Lora-AT-COMMAND-GUIDE_EN.pdf&ved=2ahUKEwjx8sTr9_zoAhXVrJ4KHUtGDZUQFjABegQIAxAC&usg=AOvVaw2mQhKeuS4PoTg3cNCiPJx7

Maybe use AT command to reset to default and try again.

Broc

On Wed, Apr 22, 2020, 11:19 AM Giovanni Blu Mitolo notifications@github.com wrote:

Ciao @rebel2234 https://github.com/rebel2234 sorry for the late response, I am not sure why but the 2 modules I have received seems totally unresponsive, do you know if the modules need to be flashed with the firmware or there is something i am missing?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/gioblu/PJON/issues/333#issuecomment-617915536, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGAFJCXIZT7YWMTMTXMZZDTRN4RJLANCNFSM4K2TLVEA .