search

gnuton / asuswrt-merlin.ng

Extends the support of Merlin firmware to more ASUS routers
Other
1.42k stars 82 forks source link

ZenWiFi XT8 / RT-AX95Q Mesh Nodes not showing correctly #532

Closed robbbaxley closed 6 months ago

robbbaxley commented 8 months ago

Router Model Affected Models: Asus ZenWiFi XT8 / RT-AX95Q

Firmware Version Affected RT-AX95Q_3004_388.6_0-gnuton0_beta1_puresqubi

Is this bug present in upstream Merlin releases too? Unknown, but not present in earlier Gnuton releases

Describe the bug Mesh Nodes not showing correctly

To Reproduce Steps to reproduce the behavior:

  1. Open Main Page (Notice no Mesh noted)
  2. Click on Network Map>Clients>View List (Nodes show here via IP Address only)

Expected behavior Mesh nodes to be accessible via Network Map>Clients>View List (

Screenshots

Web capture_26-1-2024_52422_10 0 1 200 Web capture_26-1-2024_52612_10 0 1 200

robbbaxley commented 8 months ago

I should note that I realized later that none of the Mesh nodes are actually working now, only the primary (Master) node. Not even the XT9's which are running Asus firmware. All nodes are showing 'RED'. I can reach the nodes directly via IP address and this is what I see after loggin-in:

The XT8's:

Web capture_26-1-2024_185317_10 0 1 201

The XT9's

Web capture_26-1-2024_185257_10 0 1 202

robbbaxley commented 8 months ago

Further testing: I installed the previous Gnuton Firmware RT-AX95Q_3004_388.5_0-gnuton1_puresqubi on ONLY the primary (master) node which restored connectivity to all remote Mesh nodes, both the XT8's and XT9's. All nodes are hard-wired.

dacootmeister commented 8 months ago

Hi @robbbaxley I got sort of the same setup as you do, but my Meshnodes are all connected without issue after (dirty)flashing them to 3004.388.6_0-gnuton0_beta1. Difference is that you have mixed XT8 and XT9. Which one is your main node? Repeat the procedure, starting with the main node?

image image

robbbaxley commented 8 months ago

@dacootmeister , My main node is an XT8. I will try that but in the past, using Gnuton or Asus firmware I have never had this problem before. My process is to update the remote Mesh nodes first and then update the primary/master node last. This has always worked with no issues at all until this firmware version. I don't know what has possibly changed that would cause this issue but when I have time I will try your method...but I will need to downgrade the remote Mesh nodes first.

Edited to add screenshots: Web capture_28-1-2024_14456_10 0 1 200

Web capture_28-1-2024_14645_10 0 1 200

robbbaxley commented 7 months ago

I loaded the new beta 2, [3004.388.6_0-gnuton0_beta2], and still have the issue as the earlier Beta.

However, now, I am no longer able to downgrade to 3004.388.5_0-gnuton1 like I did for Beta 1 so I am a bit stuck for the moment.

gnuton commented 7 months ago

@robbbaxley do you see any crash in the logs related to the downgrade?

robbbaxley commented 7 months ago

@gnuton, here is the log from my downgrade attemt this morning which, strangely, worked (3rd attempt):

Feb 15 06:59:09 rc_service: httpd 8840:notify_rc stop_upgrade Feb 15 06:59:09 usb: USB is ejected Feb 15 06:59:09 WEBDAV_Server: daemon is stopped Feb 15 06:59:09 WEBDAV_Server: arpping daemon is stopped Feb 15 06:59:09 iTunes: daemon is stopped Feb 15 06:59:09 FTP_Server: daemon is stopped Feb 15 06:59:09 Samba_Server: smb daemon is stopped Feb 15 06:59:09 Timemachine: daemon is stopped Feb 15 06:59:09 WEBDAV_Server: daemon is stopped Feb 15 06:59:10 iTunes: daemon is stopped Feb 15 06:59:10 FTP_Server: daemon is stopped Feb 15 06:59:10 Samba_Server: smb daemon is stopped Feb 15 06:59:10 Timemachine: daemon is stopped Feb 15 06:59:11 rc_service: hotplug 27826:notify_rc restart_nasapps Feb 15 06:59:11 rc_service: waitting "stop_upgrade" via httpd ... Feb 15 06:59:11 ntpd: Stopped ntpd Feb 15 06:59:13 ahs: ===Terminate ahs daemon=== Feb 15 06:59:14 disk_monitor: Finish Feb 15 06:59:14 Mastiff: Got SIGTERM Feb 15 06:59:18 rc_service: hotplug 27844:notify_rc restart_nasapps Feb 15 06:59:18 rc_service: waitting "restart_nasapps" via hotplug ... Feb 15 06:59:18 FTP_Server: daemon is stopped Feb 15 06:59:18 Samba_Server: smb daemon is stopped Feb 15 06:59:18 Timemachine: daemon is stopped Feb 15 06:59:19 Samba_Server: daemon is started Feb 15 06:59:19 FTP_Server: daemon is stopped Feb 15 06:59:19 wsdd2[27885]: Terminated received. Feb 15 06:59:21 Samba_Server: smb daemon is stopped Feb 15 06:59:21 Timemachine: daemon is stopped Feb 15 06:59:21 Samba_Server: daemon is started Feb 15 06:59:32 rc_service: httpd 8840:notify_rc start_upgrade Feb 15 06:59:56 WEBDAV_Server: daemon is stopped Feb 15 06:59:56 FTP_Server: daemon is stopped Feb 15 06:59:56 wsdd2[27961]: Terminated received. Feb 15 06:59:57 Samba_Server: smb daemon is stopped Feb 15 06:59:57 Timemachine: daemon is stopped Feb 15 06:59:58 kernel: Flushing net_device wl0.2. Feb 15 06:59:58 kernel: CSIMON: CSIMON[1.1.0] Initialization Feb 15 06:59:58 kernel: CSIMON: M2M usr already registered ... Feb 15 06:59:59 kernel: CSIMON: CSIMON[1.1.0] Initialization Feb 15 06:59:59 kernel: CSIMON: M2M usr already registered ... Feb 15 07:00:01 kernel: port_generic_stop 560 skip turnning off power on eth0 here Feb 15 07:00:01 kernel: port_generic_stop 560 skip turnning off power on eth1 here Feb 15 07:00:01 kernel: port_generic_stop 560 skip turnning off power on eth2 here Feb 15 07:00:02 kernel: port_generic_stop 560 skip turnning off power on eth3 here Feb 15 07:00:02 kernel: ubi2: attaching mtd10 Feb 15 07:00:02 kernel: ubi2: scanning is finished Feb 15 07:00:02 kernel: ubi2: attached mtd10 (name "misc1", size 8 MiB) Feb 15 07:00:02 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes Feb 15 07:00:02 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 Feb 15 07:00:02 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 Feb 15 07:00:02 kernel: ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 Feb 15 07:00:02 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 Feb 15 07:00:02 kernel: ubi2: max/mean erase counter: 60/27, WL threshold: 4096, image sequence number: 1526576606 Feb 15 07:00:02 kernel: ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4 Feb 15 07:00:02 kernel: ubi2: background thread "ubi_bgt2d" started, PID 28132 Feb 15 07:00:03 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 28142 Feb 15 07:00:03 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram" Feb 15 07:00:03 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Feb 15 07:00:03 kernel: UBIFS (ubi2:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs) Feb 15 07:00:03 kernel: UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB) Feb 15 07:00:03 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 9DC75FF7-E8C0-4018-A1ED-1D54D1E5AC77, small LPT model Feb 15 07:00:03 kernel: UBIFS (ubi2:0): un-mount UBI device 2 Feb 15 07:00:03 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops Feb 15 07:00:03 kernel: ubi2: detaching mtd10 Feb 15 07:00:03 kernel: ubi2: mtd10 is detached Feb 15 07:00:03 FTP_Server: daemon is stopped Feb 15 07:00:03 Samba_Server: smb daemon is stopped Feb 15 07:00:04 Timemachine: daemon is stopped Feb 15 07:00:04 FTP_Server: daemon is stopped Feb 15 07:00:04 Samba_Server: smb daemon is stopped Feb 15 07:00:04 Timemachine: daemon is stopped Feb 15 07:00:04 WEBDAV_Server: daemon is stopped May 5 01:05:23 kernel: klogd started: BusyBox v1.25.1 (2023-12-31 07:18:45 UTC) May 5 01:05:23 kernel: Linux version 4.1.52 (docker@1bc8445a2919) (gcc version 5.5.0 (Buildroot 2017.11.1) ) #1 SMP PREEMPT Sun Dec 31 07:22:33 UTC 2023 May 5 01:05:23 kernel: Kernel command line: isolcpus=3 root=/dev/ubiblock0_0 ubi.mtd=0 ubi.block=0,0 rootfstype=squashfs console=ttyAMA0 earlyprintk debug irqaffinity=0 pci=pcie_bus_safe May 5 01:05:23 kernel: Virtual kernel memory layout: May 5 01:05:23 kernel: vector : 0xffff0000 - 0xffff1000 ( 4 kB) May 5 01:05:23 kernel: fixmap : 0xffc00000 - 0xfff00000 (3072 kB) May 5 01:05:23 kernel: vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) May 5 01:05:23 kernel: lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) May 5 01:05:23 kernel: pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) May 5 01:05:23 kernel: modules : 0xbf000000 - 0xbfe00000 ( 14 MB) May 5 01:05:23 kernel: .text : 0xc0018000 - 0xc0648c60 (6340 kB) May 5 01:05:23 kernel: .init : 0xc0649000 - 0xc067e000 ( 212 kB) May 5 01:05:23 kernel: .data : 0xc067e000 - 0xc082eda0 (1732 kB) May 5 01:05:23 kernel: .bss : 0xc082eda0 - 0xc0897490 ( 418 kB) May 5 01:05:23 kernel: CCI hardware cache coherency enabled May 5 01:05:23 kernel: pmc_init:PMC using DQM mode May 5 01:05:23 kernel: Successfully retrieved NVRAM data from dtb May 5 01:05:23 kernel: cfe-v^A: 1.0.38-163.243 May 5 01:05:23 kernel: Broadcom Logger v0.1 May 5 01:05:23 kernel: skb_free_task created successfully with start budget 256 May 5 01:05:23 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m May 5 01:05:23 kernel: BLOG Rule v1.0 Initialized May 5 01:05:23 kernel: Broadcom IQoS v1.0 initialized May 5 01:05:23 kernel: Broadcom GBPM v0.1 initialized May 5 01:05:23 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz UBI volume, vmlinux fs mounted as squash fs on UBI <<<<< May 5 01:05:23 kernel: Secondary mtd partition rootfs_update detected as UBI for cferam/vmlinux source and squash fs on UBI for vmlinux filesystem May 5 01:05:23 kernel: setup_mtd_parts: misc indx 2 name misc3 nvram configured size 1 May 5 01:05:23 kernel: setup_mtd_parts: name misc3 configured size 0x00100000 offset 0xF600000 May 5 01:05:23 kernel: setup_mtd_parts: misc indx 1 name misc2 nvram configured size 47 May 5 01:05:23 kernel: setup_mtd_parts: name misc2 configured size 0x02f00000 offset 0xC700000 May 5 01:05:23 kernel: setup_mtd_parts: misc indx 0 name misc1 nvram configured size 8 May 5 01:05:23 kernel: setup_mtd_parts: name misc1 configured size 0x00800000 offset 0xBF00000 May 5 01:05:23 kernel: Creating 11 MTD partitions on "brcmnand.0": May 5 01:05:23 kernel: 0x000006000000-0x00000bf00000 : "rootfs" May 5 01:05:23 kernel: 0x000000100000-0x000006000000 : "rootfs_update" May 5 01:05:23 kernel: 0x00000f700000-0x00000ff00000 : "data" May 5 01:05:23 kernel: 0x000000000000-0x000000100000 : "nvram" May 5 01:05:23 kernel: 0x000000100000-0x000006000000 : "image_update" May 5 01:05:23 kernel: 0x000006000000-0x00000bf00000 : "image" May 5 01:05:23 kernel: 0x000000000000-0x000010000000 : "dummy1" May 5 01:05:23 kernel: 0x000000000000-0x000010000000 : "dummy2" May 5 01:05:23 kernel: 0x00000f600000-0x00000f700000 : "misc3" May 5 01:05:23 kernel: 0x00000c700000-0x00000f600000 : "misc2" May 5 01:05:23 kernel: 0x00000bf00000-0x00000c700000 : "misc1" May 5 01:05:23 kernel: brcmboard registered May 5 01:05:23 kernel: brcmboard: brcm_board_init entry May 5 01:05:23 kernel: print_rst_status: Last RESET due to Unknown May 5 01:05:23 kernel: print_rst_status: RESET reason: 0x00000000 May 5 01:05:23 kernel: DYING GASP IRQ Initialized and Enabled May 5 01:05:23 kernel: map_hw_timer_interrupt,124: interrupt_id 22 May 5 01:05:23 kernel: map_hw_timer_interrupt,124: interrupt_id 23 May 5 01:05:23 kernel: map_hw_timer_interrupt,124: interrupt_id 24 May 5 01:05:23 kernel: map_hw_timer_interrupt,124: interrupt_id 25 May 5 01:05:23 kernel: Allocated EXT_TIMER number 3 May 5 01:05:23 kernel: Broadcom Timer Initialized May 5 01:05:23 kernel: Registering button 0 (c0874e0c) (bpGpio: 00008009, bpExtIrq:00002000 (2000)) May 5 01:05:23 kernel: extIrqIdx:0, gpioNum:9 ACTIVE LOW May 5 01:05:23 kernel: Registering button 1 (c0874e80) (bpGpio: 00008008, bpExtIrq:00002001 (2001)) May 5 01:05:23 kernel: extIrqIdx:1, gpioNum:8 ACTIVE LOW May 5 01:05:23 kernel: bcm_i2c: No port/bus number define i2c interface 0!!! May 5 01:05:23 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m May 5 01:05:23 kernel: BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=30690, buf size=2624 May 5 01:05:23 kernel: ^[[0;34m[NTC bpm] bpm_mem_pool_buf_alloc: tot_mem_pool=1279 mem_idx:1279^[[0m May 5 01:05:23 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:30690^[[0m May 5 01:05:23 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 30690^[[0m May 5 01:05:23 kernel: init procfs May 5 01:05:23 kernel: Registering SWP/SWPB emulation handler May 5 01:05:23 kernel: ubi0: attaching mtd0 May 5 01:05:23 kernel: ubi0: scanning is finished May 5 01:05:23 kernel: gluebi (pid 1): gluebi_resized: got update notification for unknown UBI device 0 volume 0 May 5 01:05:23 kernel: ubi0: volume 0 ("rootfs_ubifs") re-sized from 381 to 711 LEBs May 5 01:05:23 kernel: ubi0: attached mtd0 (name "rootfs", size 95 MiB) May 5 01:05:23 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes May 5 01:05:23 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 May 5 01:05:23 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 May 5 01:05:23 kernel: ubi0: good PEBs: 760, bad PEBs: 0, corrupted PEBs: 0 May 5 01:05:23 kernel: ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 May 5 01:05:23 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 199487054 May 5 01:05:23 kernel: ubi0: available PEBs: 0, total reserved PEBs: 760, PEBs reserved for bad PEB handling: 15 May 5 01:05:23 kernel: ubi0: background thread "ubi_bgt0d" started, PID 70 May 5 01:05:23 kernel: ubi1: attaching mtd2 May 5 01:05:23 kernel: ubi1: scanning is finished May 5 01:05:23 kernel: ubi1: attached mtd2 (name "data", size 8 MiB) May 5 01:05:23 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes May 5 01:05:23 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 May 5 01:05:23 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 May 5 01:05:23 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 May 5 01:05:23 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 May 5 01:05:23 kernel: ubi1: max/mean erase counter: 435/294, WL threshold: 4096, image sequence number: 797515133 May 5 01:05:23 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4 May 5 01:05:23 kernel: ubi1: background thread "ubi_bgt1d" started, PID 165 May 5 01:05:23 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 174 May 5 01:05:23 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" May 5 01:05:23 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes May 5 01:05:23 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) May 5 01:05:23 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB) May 5 01:05:23 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A34ADCF6-E3FC-47BA-BC71-F7E5B84A6EEE, small LPT model May 5 01:05:23 kernel: wlcsm: module license 'Proprietary' taints kernel. May 5 01:05:23 kernel: Disabling lock debugging due to kernel taint May 5 01:05:23 kernel: BCMLIBS loaded... May 5 01:05:23 kernel: License chip name: 6755 May 5 01:05:23 kernel: brcmchipinfo: brcm_chipinfo_init entry May 5 01:05:23 kernel: Broadcom Ingress QoS Module Char Driver v1.0 Registered<303>^[[0m May 5 01:05:23 kernel: Broadcom Ingress QoS v1.0 initialized May 5 01:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m May 5 01:05:23 kernel: FCACHE_CONFIG_MAX_FLOW_ENTRIES<16384> May 5 01:05:23 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024> May 5 01:05:23 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64> May 5 01:05:23 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32> May 5 01:05:23 kernel: npe_max_entries<32768> May 5 01:05:23 kernel: Bind blog_notify_evt_enqueue_fn[] May 5 01:05:23 kernel: fc_evt task created successfully May 5 01:05:23 kernel: max_ent = 16384 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5 May 5 01:05:23 kernel: NBUFF v1.0 Initialized May 5 01:05:23 kernel: ^[[0;36;44mTotal # of labels = 83^[[0m May 5 01:05:23 kernel: ^[[0;36;44mInitialized fcache state^[[0m May 5 01:05:23 kernel: Pkt HW acceleration is disabled/unavailable. May 5 01:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache Char Driver v4.0 Registered<302>^[[0m May 5 01:05:23 kernel: fc_timer_task created successfully May 5 01:05:23 kernel: Pkt HW acceleration is disabled/unavailable. May 5 01:05:23 kernel: Created Proc FS /procfs/fcache May 5 01:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m May 5 01:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m May 5 01:05:23 kernel: ^[[0;35m[FHW] pktDbgLvl[0xbf0b5a84]=0^[[0m May 5 01:05:23 kernel: ^[[0;34m[FHW] fhw_construct: ^[[0m May 5 01:05:23 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m May 5 01:05:23 kernel: flwStatsThread created. numFlwsPerPoll 546 maxFlwIdx 16383 May 5 01:05:23 kernel: ^[[0;36;44mFcache Pathstats created^[[0m May 5 01:05:23 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m May 5 01:05:23 kernel: Broadcom Command List Driver v1.0 May 5 01:05:23 kernel: ^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m May 5 01:05:23 kernel: Open archer Netdevice May 5 01:05:23 kernel: Archer DS DPI Initialized May 5 01:05:23 kernel: Archer US DPI Initialized May 5 01:05:23 kernel: Archer WLAN Interface Construct (Threshold 32 packets, Timeout 500 usec, Jiffies 10) May 5 01:05:23 kernel: Archer WLAN Rx Thread Initialized May 5 01:05:23 kernel: Sysport 0 WOL IRQ 53 May 5 01:05:23 kernel: Sysport 1 WOL IRQ 59 May 5 01:05:23 kernel: SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec) May 5 01:05:23 kernel: Archer Mode set to L2+L3 May 5 01:05:23 kernel: Archer Mode set to L2+L3 May 5 01:05:23 kernel: Initialized Archer Host Layer May 5 01:05:23 kernel: Flow Table (256, 64): e15cf000, 4194304 bytes May 5 01:05:23 kernel: Flow Info Table (44, 65536): e19d0000, 2883584 bytes May 5 01:05:23 kernel: Command List Table (128): virt 0xd6400000, phys 0x16400000, size 2097152 bytes May 5 01:05:23 kernel: Command List Control Table (8): d6b80000, 131072 bytes May 5 01:05:23 kernel: Sysport Classifier Initialized: Maximum 16384 flows May 5 01:05:23 kernel: Archer IQ status changed from 0 to 1 May 5 01:05:23 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 16384^[[0m May 5 01:05:23 kernel: Retrieve num_fhw_path=64 May 5 01:05:23 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m May 5 01:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m May 5 01:05:23 kernel: Enabled Archer binding to Flow Cache May 5 01:05:23 kernel: ^[[0;36;44mBroadcom Archer Network Processor Char Driver v0.1 Registered <339>^[[0m May 5 01:05:23 kernel: Archer TCP Pure ACK Enabled May 5 01:05:23 kernel: crossbar Mux: connect cb_idx:0 int_ep 0 to ext_ep 2 May 5 01:05:23 kernel: crossbar Mux: connect cb_idx:0 int_ep 1 to ext_ep -1 May 5 01:05:23 kernel: Detecting PHYs... May 5 01:05:23 kernel: 54991EL B0 3590:5089 --> 0x1f May 5 01:05:23 kernel: Loading firmware into detected PHYs... May 5 01:05:23 kernel: Firmware version: Blackfin B0 v02-02-06 May 5 01:05:23 kernel: Loading firmware into PHYs: map=0x80000000 count=1 May 5 01:05:23 kernel: Halt the PHYs processors operation May 5 01:05:23 kernel: Upload the firmware into the on-chip memory May 5 01:05:23 kernel: ^M0%^M1%^M2%^M3%^M4%^M5%^M6%^M7%^M8%^M9%^M10%^M11%^M12%^M13%^M14%^M15%^M16%^M17%^M18%^M19%^M20%^M21%^M22%^M23%^M24%^M25%^M26%^M27%^M28%^M29%^M30%^M31%^M32%^M33%^M34%^M35%^M36%^M37%^M38%^M39%^M40%^M41%^M42%^M43%^M44%^M45%^M46%^M47%^M48%^M49%^M50%^M51%^M52%^M53%^M54%^M55%^M56%^M57%^M58%^M59%^M60%^M61%^M62%^M63%^M64%^M65%^M66%^M67%^M68%^M69%^M70%^M71%^M72%^M73%^M74%^M75%^M76%^M77%^M78%^M79%^M80%^M81%^M82%^M83%^M84%^M85%^M86%^M87%^M88%^M89%^M90%^M91%^M92%^M93%^M94%^M95%^M96%^M97%^M98%^M99%^M100% May 5 01:05:23 kernel: Reset the processors to start execution of the code in the on-chip memory May 5 01:05:23 kernel: Verify that the processors are running: OK May 5 01:05:23 kernel: Verify that the firmware has been loaded with good CRC: OK May 5 01:05:23 kernel: Firmware loading completed successfully May 5 01:05:23 kernel: Adjusted SF2 SGPHY: sphy_ctrl=0x0001081b May 5 01:05:23 kernel: getrcal for res select 5, int 649, ext 652, ratio 128 ratio1 128, rcal 8 May 5 01:05:23 kernel: Setting SGMII Calibration value to 0x8 May 5 01:05:23 kernel: PLL_PON(8051): 0x0210; TX_PON(8067): 0x0040; RX_PON(80b2): 0x0880 May 5 01:05:23 kernel: LAG/Trunking enabled <0x08> May 5 01:05:23 kernel: SYSPORT Host Binding Successfull May 5 01:05:23 kernel: Archer CPU Affinity = 3 May 5 01:05:23 kernel: : Up 1G <00:00:00:00:00:00> <IntSw P0, Logical 00> PHY_ID <0x0b600e00:0x00: On-chip RGMII Auto MAC2MAC> Cfg: FIX.1G; Down May 5 01:05:23 kernel: eth0 : Down <IntSw P1, Logical 01> PHY_ID <0x06180006:0x06:External 2.5G SERDES> Cfg: ANG.2.5G; Down May 5 01:05:23 kernel: PHY_ID <0x0388001f:0x1f:External Cascaded 10G EXT3> Cfg: ANG.2.5G; Down May 5 01:05:23 kernel: eth1 : Down <ExtSw P0, Logical 08> PHY_ID <0x20000000:0x00: On-chip 1G GPHY> Cfg: ANG.1G; Down May 5 01:05:23 kernel: eth2 : Down <ExtSw P1, Logical 09> PHY_ID <0x20000001:0x01: On-chip 1G GPHY> Cfg: ANG.1G; Down May 5 01:05:23 kernel: eth3 : Down <ExtSw P2, Logical 10> PHY_ID <0x20000002:0x02: On-chip 1G GPHY> Cfg: ANG.1G; Down May 5 01:05:23 kernel: : Up 1G <00:00:00:00:00:00> <ExtSw P3, Logical 11> May 5 01:05:23 kernel: : Up 1G <00:00:00:00:00:00> <ExtSw P5, Logical 13> May 5 01:05:23 kernel: : Up 2.5G <00:00:00:00:00:00> <ExtSw P8, Logical 08> logical_port 0: intf_index 1, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8 May 5 01:05:23 kernel: logical_port 1: intf_index 0, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8 May 5 01:05:23 kernel: logical_port 2: intf_index 0, switch_index 0, phys_port 1 -> port_index 0, nbr_of_queues 8 May 5 01:05:23 kernel: logical_port 3: intf_index 0, switch_index 0, phys_port 2 -> port_index 0, nbr_of_queues 8 May 5 01:05:23 kernel: SYSPORT[0]: port[0] -> nbr_of_brcm_tags 1 May 5 01:05:23 kernel: SYSPORT[0] = SWITCH_EXTERNAL May 5 01:05:23 kernel: SYSPORT[1]: port[0] -> nbr_of_brcm_tags 0 May 5 01:05:23 kernel: SYSPORT[1] = SWITCH_NONE May 5 01:05:23 kernel: System Port Software TM Initialized May 5 01:05:23 kernel: RXQ[0]: IRQ 48, CPU 3 May 5 01:05:23 kernel: CSB Initialized: 0xd6057000 (0xd6057000), size 64 (128) May 5 01:05:23 kernel: Ports 1, TDMA Rings 8 May 5 01:05:23 kernel: Archer DMA Layer Initialized May 5 01:05:23 kernel: Sysport Recycle Task: IRQ 49, CPU 3 May 5 01:05:23 kernel: System Port Software TM Initialized May 5 01:05:23 kernel: RXQ[0]: IRQ 54, CPU 3 May 5 01:05:23 kernel: CSB Initialized: 0xd61af000 (0xd61af000), size 64 (128) May 5 01:05:23 kernel: Ports 1, TDMA Rings 8 May 5 01:05:23 kernel: Archer DMA Layer Initialized May 5 01:05:23 kernel: Sysport Recycle Task: IRQ 55, CPU 3 May 5 01:05:23 kernel: Sysport TM Enabled May 5 01:05:23 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered May 5 01:05:23 kernel: bcm_enet_init:L2452 ENET system contructed and configured enet-kthrd thread May 5 01:05:23 kernel: enet_kthread_handler:L290 Instantiating ENET thread May 5 01:05:23 kernel: PCIe HCD (impl1)^M May 5 01:05:23 kernel: bcm963xx-pcie: found core [1] vcore [0] ^M May 5 01:05:23 kernel: bcm963xx-pcie: [0] DT node available: /pcie@85000000 May 5 01:05:23 kernel: bcm963xx-pcie: vcore [0] initialized with [2] devices^M May 5 01:05:23 kernel: bcm963xx-pcie: [0] DT node available: /pcie@80040000 May 5 01:05:23 kernel: bcm963xx-pcie: found port [0] GEN2 Core Rev [3.23] with 2 Lanes^M May 5 01:05:23 kernel: getrcal for res select 5, int 649, ext 652, ratio 128 ratio1 128, rcal 8 May 5 01:05:23 kernel: bcm963xx-pcie: Core [0] setting resistor calibration value to 0x8 May 5 01:05:23 kernel: bcm963xx-pcie: core [0] Link UP - [2] lanes, [GEN2] speed^M May 5 01:05:23 kernel: bcm963xx-pcie: Core [0] Enabled PCIE/UBUS Error Interrupts^M May 5 01:05:23 kernel: bcm963xx-pcie: Core [0] UBUS Intr [UBUS_LINKUP]^M May 5 01:05:23 kernel: broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4) May 5 01:05:23 kernel: brcm_otp_init entry May 5 01:05:23 kernel: ubi2: attaching mtd10 May 5 01:05:23 kernel: ubi2: scanning is finished May 5 01:05:23 kernel: ubi2: attached mtd10 (name "misc1", size 8 MiB) May 5 01:05:23 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes May 5 01:05:23 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 May 5 01:05:23 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 May 5 01:05:23 kernel: ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 May 5 01:05:23 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 May 5 01:05:23 kernel: ubi2: max/mean erase counter: 60/27, WL threshold: 4096, image sequence number: 1526576606 May 5 01:05:23 kernel: ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4 May 5 01:05:23 kernel: ubi2: background thread "ubi_bgt2d" started, PID 369 May 5 01:05:23 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 386 May 5 01:05:23 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram" May 5 01:05:23 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes May 5 01:05:23 kernel: UBIFS (ubi2:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs) May 5 01:05:23 kernel: UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB) May 5 01:05:23 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 9DC75FF7-E8C0-4018-A1ED-1D54D1E5AC77, small LPT model May 5 01:05:23 kernel: UBIFS (ubi2:0): un-mount UBI device 2 May 5 01:05:23 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops May 5 01:05:23 kernel: ubi2: detaching mtd10 May 5 01:05:23 kernel: ubi2: mtd10 is detached May 5 01:05:23 kernel: jffs2: warning: (429) jffs2_do_read_inode_internal: no data nodes found for ino #22124 May 5 01:05:23 kernel: jffs2: notice: (429) jffs2_do_read_inode_internal: but it has children so we fake some modes for it May 5 01:05:23 kernel: Loading HND Module May 5 01:05:23 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 31800 May 5 01:05:23 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 51800 May 5 01:05:23 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 72000 May 5 01:05:23 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 92000 May 5 01:05:23 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address b2800 May 5 01:05:23 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address d2800 May 5 01:05:23 kernel: igs_module_init:867: IGS 29 create network socket successful May 5 01:05:23 kernel: Archer TCP Pure ACK Enabled May 5 01:05:23 kernel: Sysport TM Disabled May 5 01:05:23 kernel: Flushed 0 packets May 5 01:05:23 kernel: Flushed 0 packets May 5 01:05:23 kernel: Flushed 0 packets May 5 01:05:23 kernel: Flushed 0 packets May 5 01:05:23 kernel: dpsta_init: 17.10.157.2809 (r801046) 3a6a0ab Sep 15 2021 18:00:32 msglevel 0x1 May 5 01:05:23 kernel: osl_skb_audit: PASS May 5 01:05:23 kernel: wl_module_init: passivemode set to 0x1 May 5 01:05:23 kernel: wl_module_init: txworkq set to 0x0 May 5 01:05:23 kernel: ^[[0;32mwl_pktfwd_sys_init: ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m May 5 01:05:23 kernel: si_doattach: using BAR0 value: enum_base=85000000 May 5 01:05:23 kernel: BME Service Initialization May 5 01:05:23 kernel: BME: M2M Core id 0x844 rev 128 May 5 01:05:23 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003 May 5 01:05:23 kernel: M2M: M2M Core id 0x844 rev 128 May 5 01:05:23 kernel: M2M: SUCCESS eng 0 alloc rings <d62ac000,d6208000>,d62a7000 depth 256 May 5 01:05:23 kernel: M2M: SUCCESS eng 1 alloc rings <d40a2000,d63a2000>,d62a7800 depth 256 May 5 01:05:23 kernel: M2M: DMA 0 IntRcvLazy 01000000 May 5 01:05:23 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled May 5 01:05:23 kernel: M2M: DMA 1 IntRcvLazy 01000000 May 5 01:05:23 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled May 5 01:05:23 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0 May 5 01:05:23 kernel: kerSysGetWifiLed(0) returned 0 May 5 01:05:23 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0 May 5 01:05:23 kernel: CSIMON module registered May 5 01:05:23 kernel: wl0_awl attach successful tx: 1, rx: 2 May 5 01:05:23 kernel: WL_FLCTL[0] bpm_total_skb 30690, exhaustion_hi 3069, exhaustion_lo 7672, prio_favor 4 May 5 01:05:23 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 0, radio_index 0, mode SKB^[[0m May 5 01:05:23 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m May 5 01:05:23 kernel: eth4: Broadcom BCM63178 802.11 Wireless Controller 17.10.157.2809 (r801046) 3e230b8 May 5 01:05:23 kernel: si_doattach: using BAR0 value: enum_base=86000000 May 5 01:05:23 kernel: BME Service Initialization May 5 01:05:23 kernel: BME: M2M Core id 0x844 rev 128 May 5 01:05:23 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003 May 5 01:05:23 kernel: M2M: M2M Core id 0x844 rev 128 May 5 01:05:23 kernel: M2M: SUCCESS eng 0 alloc rings <d6242000,d627e000>,d4a01000 depth 256 May 5 01:05:23 kernel: M2M: SUCCESS eng 1 alloc rings <d63a4000,d6330000>,d49f5800 depth 256 May 5 01:05:23 kernel: M2M: DMA 0 IntRcvLazy 01000000 May 5 01:05:23 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled May 5 01:05:23 kernel: M2M: DMA 1 IntRcvLazy 01000000 May 5 01:05:23 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled May 5 01:05:23 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0 May 5 01:05:23 kernel: kerSysGetWifiLed(1) returned 0 May 5 01:05:23 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0 May 5 01:05:23 kernel: CSIMON module registered May 5 01:05:23 kernel: wl1_awl attach successful tx: 1, rx: 2 May 5 01:05:23 kernel: WL_FLCTL[1] bpm_total_skb 30690, exhaustion_hi 3069, exhaustion_lo 7672, prio_favor 4 May 5 01:05:23 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 1, radio_index 1, mode SKB^[[0m May 5 01:05:23 kernel: ^[[0;32mwl_wfd_bind: wl1 wfd_idx 1 success^[[0m May 5 01:05:23 kernel: eth5: Broadcom BCM63178 802.11 Wireless Controller 17.10.157.2809 (r801046) 3e230b8 May 5 01:05:23 kernel: DHD_FKB_POOL size is:1280 and entry size:2624 May 5 01:05:23 kernel: DHD_PKTTAG POOL size is:2592 and entry size:64 May 5 01:05:23 kernel: ^[[0;32mdhd_pktfwd_sys_init: ^[[1m^[[34mdhd_PKTFWD[1.0.0]^[[0m Success^[[0m May 5 01:05:23 kernel: PCI_PROBE: bus 1, slot 0,vendor 14E4, device AAA4(good PCI location) May 5 01:05:23 kernel: dhd_attach(): thread:dhd_watchdog_thread:320 started May 5 01:05:23 kernel: dhd2_awl attach successful tx: 1, rx: 2 May 5 01:05:23 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 2, radio_index 2, mode FKB^[[0m May 5 01:05:23 kernel: ^[[0;32mdhd_wfd_bind: wl2 wfd_idx 2 success^[[0m May 5 01:05:23 kernel: CUR_ETHERADDR : 6 May 5 01:05:23 kernel: f0 2f 74 5a 6e 58 May 5 01:05:23 kernel: Dongle Host Driver, version 17.10.157.2809 (r801046) May 5 01:05:23 kernel: Compiled in drivers/net/wireless/bcmdhd May 5 01:05:23 kernel: Register interface [eth6] MAC: f0:2f:74:5a:6e:58 May 5 01:05:23 kernel: proc_dostring_crashlogsave: crash log filename is /jffs/crashlog.log May 5 01:05:23 kernel: crashFileSet: log signature invalid ! May 5 01:05:23 kernel: ret 0 retlen 65536 buff <6>hub 2-0:1.0: 1 port detected May 5 01:05:25 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:25 kernel: eth0: sysport_tm port shaper set to 2497500 kbps, 150000 mbs (phy speed 2500000 kbps) May 5 01:05:25 kernel: eth0 (Int switch port: 1) (Logical Port: 1) (phyId: 1f) Link Up at 2500 mbps full duplex May 5 01:05:26 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:26 kernel: CSIMON: M2M usr already registered ... May 5 01:05:27 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:27 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:27 kernel: CSIMON: M2M usr already registered ... May 5 01:05:27 kernel: Interface eth%d doesn't exist May 5 01:05:27 kernel: could not find igs interface! May 5 01:05:27 kernel: IGMP Query send failed May 5 01:05:27 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:27 kernel: CSIMON: M2M usr already registered ... May 5 01:05:27 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:27 kernel: CSIMON: M2M usr already registered ... May 5 01:05:27 rc_service: udhcpc_lan 1647:notify_rc stop_httpd May 5 01:05:27 rc_service: udhcpc_lan 1647:notify_rc start_httpd May 5 01:05:27 rc_service: waitting "stop_httpd" via udhcpc_lan ... May 5 01:05:27 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:27 kernel: CSIMON: M2M usr already registered ... May 5 01:05:27 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:27 kernel: CSIMON: M2M usr already registered ... May 5 01:05:28 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:28 kernel: CSIMON: M2M usr already registered ... May 5 01:05:28 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:28 kernel: CSIMON: M2M usr already registered ... May 5 01:05:28 haveged: haveged starting up May 5 01:05:29 rc_service: service 1770:notify_rc restart_firewall May 5 01:05:29 rc_service: waitting "stop_httpd" via udhcpc_lan ... May 5 01:05:29 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:29 kernel: CSIMON: M2M usr already registered ... May 5 01:05:29 kernel: CSIMON: CSIMON[1.1.0] Initialization May 5 01:05:29 kernel: CSIMON: M2M usr already registered ... May 5 01:05:29 wlceventd: main(1239): wlceventd Start... May 5 01:05:29 wlceventd: wlceventd_proc_event(685): eth4: Auth 40:F6:BC:9F:C0:7D, status: Successful (0), rssi:0 May 5 01:05:30 wlceventd: wlceventd_proc_event(722): eth4: Assoc 40:F6:BC:9F:C0:7D, status: Successful (0), rssi:-48 May 5 01:05:30 acsd: eth4: Selecting 2g band ACS policy May 5 01:05:30 ZenWiFi_XT8: start https:8443 May 5 01:05:30 ZenWiFi_XT8: start httpd:80 May 5 01:05:30 avahi-daemon[1831]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! May 5 01:05:30 httpd: Save SSL certificate...8443 May 5 01:05:30 httpd: mssl_cert_key_match : PASS May 5 01:05:31 disk_monitor: be idle May 5 01:05:31 httpd: Succeed to init SSL certificate...8443 May 5 01:05:31 httpd: Succeed to init SSL certificate...80 May 5 01:05:31 Mastiff: init May 5 01:05:31 avahi-daemon[1831]: Alias name "ZenWiFi_XT8" successfully established. May 5 01:05:32 Samba_Server: daemon is started May 5 01:05:32 dbus: daemon is started May 5 01:05:32 jffs2: valid logs(1) May 5 01:05:32 wsdd2[2252]: error: wsdd-mcast-v4: wsd_send_soap_msg: send May 5 01:05:33 lldpd[2407]: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted May 5 01:05:33 acsd: eth4: selected channel spec: 0x1805 (3l) May 5 01:05:33 acsd: eth4: Adjusted channel spec: 0x1805 (3l) May 5 01:05:33 acsd: eth4: selected channel spec: 0x1805 (3l) May 5 01:05:33 acsd: acs_set_chspec: 0x1805 (3l) for reason APCS_INIT May 5 01:05:33 acsd: eth5: Selecting 5g band ACS policy May 5 01:05:34 kernel: jffs2: warning: (2482) jffs2_do_read_inode_internal: no data nodes found for ino #22124 May 5 01:05:34 kernel: jffs2: notice: (2482) jffs2_do_read_inode_internal: but it has children so we fake some modes for it May 5 01:05:34 wlceventd: wlceventd_proc_event(685): eth4: Auth 10:09:F9:56:37:5B, status: Successful (0), rssi:0 May 5 01:05:34 wlceventd: wlceventd_proc_event(722): eth4: Assoc 10:09:F9:56:37:5B, status: Successful (0), rssi:-59 May 5 01:05:35 acsd: eth5: selected channel spec: 0xe32a (48/80) May 5 01:05:35 acsd: eth5: Adjusted channel spec: 0xe32a (48/80) May 5 01:05:35 acsd: eth5: selected channel spec: 0xe32a (48/80) May 5 01:05:35 acsd: acs_set_chspec: 0xe32a (48/80) for reason APCS_INIT May 5 01:05:35 wlceventd: wlceventd_proc_event(685): eth4: Auth 10:BF:67:4A:E0:0D, status: Successful (0), rssi:0 May 5 01:05:35 wlceventd: wlceventd_proc_event(685): eth4: Auth 90:A8:22:93:75:AA, status: Successful (0), rssi:0 May 5 01:05:35 wlceventd: wlceventd_proc_event(722): eth4: Assoc 90:A8:22:93:75:AA, status: Successful (0), rssi:-49 May 5 01:05:35 wlceventd: wlceventd_proc_event(722): eth4: Assoc 10:BF:67:4A:E0:0D, status: Successful (0), rssi:-58 May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth FC:E9:D8:09:90:EC, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc FC:E9:D8:09:90:EC, status: Successful (0), rssi:-57 May 5 01:05:36 kernel: SCSI subsystem initialized May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth 50:D4:5C:D9:0B:D3, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth 10:BF:67:E9:42:D9, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth 78:6C:84:07:99:FB, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth 20:FE:00:DD:6B:55, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth A0:D2:B1:2B:E1:64, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc 50:D4:5C:D9:0B:D3, status: Successful (0), rssi:-35 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc 20:FE:00:DD:6B:55, status: Successful (0), rssi:-51 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc A0:D2:B1:2B:E1:64, status: Successful (0), rssi:-45 May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth 10:BF:67:77:D4:87, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc 78:6C:84:07:99:FB, status: Successful (0), rssi:-44 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc 10:BF:67:E9:42:D9, status: Successful (0), rssi:-57 May 5 01:05:36 wlceventd: wlceventd_proc_event(685): eth4: Auth 28:73:F6:46:86:1B, status: Successful (0), rssi:0 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc 28:73:F6:46:86:1B, status: Successful (0), rssi:-57 May 5 01:05:36 wlceventd: wlceventd_proc_event(722): eth4: Assoc 10:BF:67:77:D4:87, status: Successful (0), rssi:-59 May 5 01:05:36 kernel: tfat: loading out-of-tree module taints kernel. May 5 01:05:37 wlceventd: wlceventd_proc_event(685): eth4: Auth 10:BF:67:50:27:3F, status: Successful (0), rssi:0 May 5 01:05:37 wlceventd: wlceventd_proc_event(685): eth4: Auth 68:F6:3B:F3:BD:8F, status: Successful (0), rssi:0 May 5 01:05:37 wlceventd: wlceventd_proc_event(722): eth4: Assoc 10:BF:67:50:27:3F, status: Successful (0), rssi:-59 May 5 01:05:37 wlceventd: wlceventd_proc_event(685): eth4: Auth 80:6D:71:3C:D6:EE, status: Successful (0), rssi:-62 May 5 01:05:37 wlceventd: wlceventd_proc_event(722): eth4: Assoc 80:6D:71:3C:D6:EE, status: Successful (0), rssi:-62 May 5 01:05:37 ahs: [read_json]Update ahs JSON file. May 5 01:05:37 init: fwver: 3.0.0.4_388.5_0-gnuton1 (sn: /ha:F0:2F:74:5A:6E:50 ) May 5 01:05:37 wlceventd: wlceventd_proc_event(722): eth4: Assoc 68:F6:3B:F3:BD:8F, status: Successful (0), rssi:-65 May 5 01:05:37 kernel: scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 May 5 01:05:37 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 5 01:05:37 kernel: sd 0:0:0:0: [sda] 968755200 512-byte logical blocks: (496 GB/462 GiB) May 5 01:05:37 kernel: sd 0:0:0:0: [sda] Write Protect is off May 5 01:05:37 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA May 5 01:05:37 wlceventd: wlceventd_proc_event(685): eth4: Auth 44:3D:54:7A:88:83, status: Successful (0), rssi:0 May 5 01:05:37 wlceventd: wlceventd_proc_event(722): eth4: Assoc 44:3D:54:7A:88:83, status: Successful (0), rssi:-60 May 5 01:05:38 ZenWiFi_XT8: start https:8443 May 5 01:05:38 ZenWiFi_XT8: start httpd:80 May 5 01:05:38 rc_service: udhcpc_lan 1647:notify_rc start_dnsmasq May 5 01:05:38 rc_service: waitting "start_httpd" via udhcpc_lan ... May 5 01:05:38 wsdd2[2252]: error: wsdd-mcast-v4: wsd_send_soap_msg: send May 5 01:05:38 wlceventd: wlceventd_proc_event(685): eth5: Auth 88:B6:EE:7D:BB:32, status: Successful (0), rssi:-68 May 5 01:05:38 wlceventd: wlceventd_proc_event(722): eth5: Assoc 88:B6:EE:7D:BB:32, status: Successful (0), rssi:-68 May 5 01:05:38 httpd: Succeed to init SSL certificate...8443 May 5 01:05:38 httpd: Succeed to init SSL certificate...80 May 5 01:05:39 rc_service: udhcpc_lan 1647:notify_rc stop_ntpd May 5 01:05:39 rc_service: waitting "start_dnsmasq" via udhcpc_lan ... May 5 01:05:39 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 5 01:05:40 rc_service: udhcpc_lan 1647:notify_rc start_ntpd May 5 01:05:40 rc_service: waitting "stop_ntpd" via udhcpc_lan ... May 5 01:05:40 cfg_server: cm_updateChanspec call wl_chanspec_changed_action May 5 01:05:40 cfg_server: event: wl_chanspec_changed_action_a101 of eid(0) of cfgs(2482) May 5 01:05:40 cfg_server: ! handling event in static chan case: (5g_1)wl1_chanspec:0 / (5g_2)wl2_chanspec:100/160 May 5 01:05:40 cfg_server: current chansp(unit0) is 1805 May 5 01:05:40 cfg_server: current chansp(unit1) is e32a May 5 01:05:41 cfg_server: current chansp(unit2) is e872 May 5 01:05:41 ntpd: Started ntpd May 5 01:05:41 LAN: network changes (10.0.1.200/255.255.255.0 --> 10.0.1.200/255.255.255.0) May 5 01:05:41 rc_service: udhcpc_lan 1647:notify_rc stop_samba May 5 01:05:41 rc_service: udhcpc_lan 1647:notify_rc start_samba May 5 01:05:41 rc_service: waitting "stop_samba" via udhcpc_lan ... May 5 01:05:41 wlceventd: wlceventd_proc_event(685): eth4: Auth E8:9F:6D:0E:50:2C, status: Successful (0), rssi:0 May 5 01:05:41 wlceventd: wlceventd_proc_event(722): eth4: Assoc E8:9F:6D:0E:50:2C, status: Successful (0), rssi:-43 May 5 01:05:41 wsdd2[2252]: Terminated received. May 5 01:05:42 smbd[2326]: [2018/05/05 01:05:42.132000, 0] lib/util_sock.c:667(open_socket_in) May 5 01:05:42 smbd[2326]: bind failed on port 445 socket_addr = 192.168.50.1 May 5 01:05:42 smbd[2326]: Error = Cannot assign requested address May 5 01:05:42 smbd[2326]: [2018/05/05 01:05:42.132903, 0] smbd/server.c:628(smbd_open_one_socket) May 5 01:05:42 smbd[2326]: smbd_open_once_socket: open_socket_in: Cannot assign requested address May 5 01:05:42 smbd[2326]: [2018/05/05 01:05:42.133174, 0] lib/util_sock.c:667(open_socket_in) May 5 01:05:42 smbd[2326]: bind failed on port 139 socket_addr = 192.168.50.1. May 5 01:05:42 smbd[2326]: Error = Cannot assign requested address May 5 01:05:42 smbd[2326]: [2018/05/05 01:05:42.133499, 0] smbd/server.c:628(smbd_open_one_socket) May 5 01:05:42 smbd[2326]: smbd_open_once_socket: open_socket_in: Cannot assign requested address May 5 01:05:42 wlceventd: wlceventd_proc_event(662): eth4: Disassoc 40:F6:BC:9F:C0:7D, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 May 5 01:05:42 wlceventd: wlceventd_proc_event(662): eth4: Disassoc 40:F6:BC:9F:C0:7D, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 May 5 01:05:42 roamast: ROAMING Start... May 5 01:05:43 Samba_Server: smb daemon is stopped Feb 15 07:01:12 ntpd: Initial clock set Feb 15 07:01:12 wlceventd: wlceventd_proc_event(645): eth4: Deauth_ind 68:F6:3B:F3:BD:8F, status: 0, reason: Previous authentication no longer valid (2), rssi:-65 Feb 15 07:01:12 wlceventd: wlceventd_proc_event(645): eth4: Deauth_ind 68:F6:3B:F3:BD:8F, status: 0, reason: Disassociated due to inactivity (4), rssi:-65 Feb 15 07:01:12 rc_service: ntpd_synced 3622:notify_rc restart_diskmon Feb 15 07:01:12 rc_service: waitting "start_samba" via udhcpc_lan ... Feb 15 07:01:13 wlceventd: wlceventd_proc_event(645): eth4: Deauth_ind 68:F6:3B:F3:BD:8F, status: 0, reason: Unspecified reason (1), rssi:0 Feb 15 07:01:13 wlceventd: wlceventd_proc_event(685): eth4: Auth 68:F6:3B:F3:BD:8F, status: Successful (0), rssi:0 Feb 15 07:01:13 wlceventd: wlceventd_proc_event(722): eth4: Assoc 68:F6:3B:F3:BD:8F, status: Successful (0), rssi:-64 Feb 15 07:01:13 wlceventd: wlceventd_proc_event(645): eth4: Deauth_ind 10:BF:67:E9:42:D9, status: 0, reason: Previous authentication no longer valid (2), rssi:-57 Feb 15 07:01:13 wlceventd: wlceventd_proc_event(645): eth4: Deauth_ind 10:BF:67:E9:42:D9, status: 0, reason: Disassociated due to inactivity (4), rssi:-57 Feb 15 07:01:13 Samba_Server: daemon is started Feb 15 07:01:14 wlceventd: wlceventd_proc_event(662): eth4: Disassoc 10:BF:67:E9:42:D9, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Feb 15 07:01:14 wlceventd: wlceventd_proc_event(662): eth4: Disassoc 10:BF:67:E9:42:D9, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Feb 15 07:01:14 disk_monitor: Finish Feb 15 07:01:14 disk_monitor: be idle Feb 15 07:01:16 usb: USB ntfs fs at /dev/sda1 mounted on /tmp/mnt/USB_DRIVE. Feb 15 07:01:16 rc_service: hotplug 3862:notify_rc restart_nasapps Feb 15 07:01:19 iTunes: daemon is stopped Feb 15 07:01:19 FTP_Server: daemon is stopped Feb 15 07:01:19 avahi-daemon[4116]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Feb 15 07:01:19 wsdd2[3754]: Terminated received. Feb 15 07:01:20 avahi-daemon[4116]: Alias name "ZenWiFi_XT8" successfully established. Feb 15 07:01:21 Samba_Server: smb daemon is stopped Feb 15 07:01:23 Timemachine: daemon is stopped Feb 15 07:01:23 avahi-daemon[4158]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Feb 15 07:01:23 Samba_Server: daemon is started Feb 15 07:01:24 avahi-daemon[4158]: Alias name "ZenWiFi_XT8" successfully established. Feb 15 07:01:25 avahi-daemon[4184]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Feb 15 07:01:25 iTunes_Server: daemon is started Feb 15 07:01:26 avahi-daemon[4184]: Alias name "ZenWiFi_XT8" successfully established. Feb 15 07:01:29 crond[1824]: time disparity of 3041695 minutes detected Feb 15 07:01:33 mt-daapd[4180]: Starting signal handler Feb 15 07:01:34 mt-daapd[4180]: Loading playlists Feb 15 07:01:34 mt-daapd[4180]: Initializing database Feb 15 07:01:34 mt-daapd[4180]: Starting mp3 scan Feb 15 07:02:52 ahs: [read_json]Update ahs JSON file. Feb 15 07:03:36 mt-daapd[4180]: Starting web server from /rom/etc/web on port 3689 Feb 15 07:03:36 mt-daapd[4180]: Scanned 6913 songs in 132 seconds Feb 15 07:03:40 wlceventd: wlceventd_proc_event(645): eth5: Deauth_ind 88:B6:EE:7D:BB:32, status: 0, reason: Disassociated due to inactivity (4), rssi:-60 Feb 15 07:03:40 wlceventd: wlceventd_proc_event(645): eth5: Deauth_ind 88:B6:EE:7D:BB:32, status: 0, reason: Previous authentication no longer valid (2), rssi:-60 Feb 15 07:03:40 wlceventd: wlceventd_proc_event(645): eth5: Deauth_ind 88:B6:EE:7D:BB:32, status: 0, reason: Unspecified reason (1), rssi:-69 Feb 15 07:03:40 wlceventd: wlceventd_proc_event(685): eth5: Auth 88:B6:EE:7D:BB:32, status: Successful (0), rssi:-69 Feb 15 07:03:40 wlceventd: wlceventd_proc_event(722): eth5: Assoc 88:B6:EE:7D:BB:32, status: Successful (0), rssi:-69 Feb 15 07:03:59 wlceventd: wlceventd_proc_event(645): eth4: Deauth_ind 10:BF:67:77:D4:87, status: 0, reason: Disassociated due to inactivity (4), rssi:-54 Feb 15 07:03:59 wlceventd: wlceventd_proc_event(662): eth4: Disassoc 10:BF:67:77:D4:87, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Feb 15 07:03:59 wlceventd: wlceventd_proc_event(662): eth4: Disassoc 10:BF:67:77:D4:87, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Feb 15 07:06:06 rc_service: httpd 2610:notify_rc restart_logger Feb 15 07:06:06 kernel: klogd started: BusyBox v1.25.1 (2023-12-31 07:18:45 UTC) Feb 15 07:06:34 rc_service: httpd 2610:notify_rc restart_logger Feb 15 07:06:34 kernel: klogd started: BusyBox v1.25.1 (2023-12-31 07:18:45 UTC) Feb 15 07:06:58 kernel: klogd started: BusyBox v1.25.1 (2023-12-31 07:18:45 UTC)

robbbaxley commented 7 months ago

I have no idea why the downgrade worked this morning on my 3rd attempt but glad it did. Once I was able to successfully load the downgraded firmware, I attempted to upgrade the remote/slave XT8 nodes which did work and, so far, appear to be functioning normally.

Screenshot_15-2-2024_73256_10 0 1 200

gnuton commented 7 months ago

I have not checked this issue yet, but usually the errors like the one in ths github issue, are the ones you can fix by cleaning your NVRAM. There may be something bad there, Another way to debug the problem is to press F12 and check the network call or the js console. if there are errors you get a red box

robbbaxley commented 7 months ago

@gnuton , quick question for you (or anyone else who knows the answer)...how do you clear the NVRAM on the XT8? I thought I knew how, but...no, I don't remember LOL

gnuton commented 7 months ago

Reset to factory. Nvram contains the settings

GittyScott commented 7 months ago

I believe resetting by holding the wps button during boot clears the NVRAM on most Asus routers? But if not, you can ssh in and run a command for it NB. There's a few variations of the command between versions, you might need to research which is best for your router before running.

gnuton commented 6 months ago

@robbbaxley I will close this as duplicate of https://github.com/gnuton/asuswrt-merlin.ng/issues/542 In case I am wrong I will reopen this issue again

robbbaxley commented 6 months ago

@gnuton I concur with you that this issue is likely related to or a duplicate of #542