problem with "Funni_Stick_V3"

hak5 / usbrubberducky-payloads

The Official USB Rubber Ducky Payload Repository

https://usbrubberducky.com

4.17k stars 1.35k forks source link

problem with "Funni_Stick_V3" #57

Closed blackeyes1200 closed 1 year ago

blackeyes1200 commented 2 years ago

Problem with the exclusion path with the argument $duckletter. I tried differents things but didn't manage to find a solution.

dallaswinger commented 2 years ago

@MakeshiftMaker

MakeshiftMaker commented 2 years ago

Are you using twin-duck firmware on your Ducky? What error does it throw you exactly and what did you try to fix it? @blackeyes1200

gaskann16 commented 1 year ago

@dallaswinger I am getting the same exact error about the $duckletter issue. I am also using it on my flipper, which claims to have been figured out from what I have read. 318970438_662583092199040_3930648229223125057_n

dallaswinger commented 1 year ago

@dallaswinger I am getting the same exact error about the $duckletter issue. I am also using it on my flipper, which claims to have been figured out from what I have read.

Firstly, I did not author this payload. Secondly, a payload that was authored for the Original Rubber Ducky running a different firmware (twin duck, as noted directly by the author) almost certainly is not going to be plug and play compatible with a Flipper...

MakeshiftMaker commented 1 year ago

@dallaswinger I am getting the same exact error about the $duckletter issue. I am also using it on my flipper, which claims to have been figured out from what I have read.

as stated above this script was made for the original ducky running the twin duck firmware, it requires the ducky to be a mass storage device at the same time so it can find and execute the mimikatz exe saved ON the ducky itself. This does not work with the flipper zero as it is not a mass storage device (I looked into it tho its not possible yet sadly). But you can use the Simple_User_Password_Grabber. This script does not require a mass storage device and just loads the mimikatz executable from an online source. (online source not included)

gaskann16 commented 1 year ago

Yea I have successfully used that one. I have a bounty set out for a local college and I am wanting to go in with some additional tools. If I am caught in any way, I fail it.

gaskann16 commented 1 year ago

@dallaswinger I am getting the same exact error about the $duckletter issue. I am also using it on my flipper, which claims to have been figured out from what I have read.

as stated above this script was made for the original ducky running the twin duck firmware, it requires the ducky to be a mass storage device at the same time so it can find and execute the mimikatz exe saved ON the ducky itself. This does not work with the flipper zero as it is not a mass storage device (I looked into it tho its not possible yet sadly). But you can use the Simple_User_Password_Grabber. This script does not require a mass storage device and just loads the mimikatz executable from an online source. (online source not included)

Yea i gathered that much from reading through it after the fact. I swear where i grabbed it from it was being advertised as patched and working for the flipper. Ill have to read through it again and see if i missed something.

dallaswinger commented 1 year ago

@gaskann16 This repo is only for USB Rubber Ducky payloads written in official DuckyScript. Which are only supported on the Hak5 Device: USB Rubber Ducky.