Open damianden opened 7 years ago
If Arducopter frame #define FRAME_CONFIG TRI_FRAME servo pin on D2 dont work. D2=servo dont yaw or any stick D3=back esc motor is OK D5=front right esc motor is OK D6=front left esc motor is OK
Arducopter3.2.1_I2c
{X] Copter
TRI_FRAME
CRIUS AllinOne v2
no logs
@damianden Hi, i reordered an input mistake, please check again and try test it on D7.
Greetings. Hiroshi.
Issue details
If Arducopter frame #define FRAME_CONFIG TRI_FRAME servo pin on D2 dont work. D2=servo dont yaw or any stick D3=back esc motor is OK D5=front right esc motor is OK D6=front left esc motor is OK
Version
Arducopter3.2.1_I2c
Platform
{X] Copter
Airframe type
TRI_FRAME
Hardware type
CRIUS AllinOne v2
Logs
no logs